Focusrite Clarett+ 2Pre USB-C Bus-Powered Audio Interface for Music Production (124dB)
Bottom line: The Focusrite Clarett+ 2Pre USB-C Bus-Powered Audio Interface: Two Clarett+ mic preamps with high headroom and ultra-low noise; main trade-off: bus power needs a 15W USB-C port; weaker laptop ports may not run it.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two Clarett+ mic preamps with high headroom and ultra-low noise
- ✓ Analogue Air mode: 2.2k ohm impedance switch plus a combined 4dB high-end lift
- ✓ Hi-Z JFET instrument inputs keep guitar tone like an amp input
- ✓ 24-bit/192kHz independent A-D/D-A converters rated at 124dB
- ✓ ADAT optical input adds eight channels for later expansion
Cons
- ✗ Bus power needs a 15W USB-C port; weaker laptop ports may not run it
- ✗ Only two mic preamps; tracking drums or a full band needs ADAT add-ons
- ✗ ADAT expansion means buying an extra preamp unit like the Clarett OctoPre
- ✗ Costs more than basic two-input interfaces with similar I/O counts
Manufacturer description
The Focusrite Clarett+ 2Pre is a bus-powered USB-C audio interface for Mac and PC, built for home studios and mobile recording rigs that need cleaner preamps than entry-level boxes provide. Its two Clarett+ mic preamps give you a lot of headroom with low distortion and very low noise, so quiet vocals and loud sources both record cleanly. Press Air on any preamp and relay-controlled analogue circuitry emulates the classic Focusrite ISA 110. It switches the input impedance to 2.2k ohms and adds two stacked high shelves for a combined 4dB lift in the high frequencies, which brings vocals…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Focusrite Clarett+ 2Pre USB-C Bus-Powered Audio Interface, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Two Clarett+ mic preamps with high headroom and ultra-low noise"; the main trade-off is "Bus power needs a 15W USB-C port; weaker laptop ports may not run it". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the Focusrite Clarett+ 2Pre need a power adapter?
No. It runs on USB-C bus power alone, but the USB-C port you connect it to must supply 15W. If your computer's port can't deliver that, use a port or hub that can.
What sample rate and bit depth does the Clarett+ 2Pre support?
It records and plays back at up to 24-bit/192kHz through independent A-D and D-A converters, with a rated dynamic range of 124dB.
Can I plug a guitar directly into the Clarett+ 2Pre?
Yes. It has two dedicated ultra-high-impedance JFET instrument inputs with wide audio bandwidth. They're designed to behave like a guitar amp input, so your guitar or bass keeps its natural tone without a separate DI box.
Can I add more inputs to the Clarett+ 2Pre later?
Yes. The ADAT optical input accepts up to eight extra digital channels from ADAT-compatible gear such as the Focusrite Clarett OctoPre, so you can grow beyond the two built-in preamps.
What does the Air button do on the Clarett+ 2Pre?
Air is all-analogue and relay-controlled on each preamp. It emulates the Focusrite ISA 110 by switching the input impedance to 2.2k ohms and adding two stacked high shelves for a combined 4dB boost in the high frequencies, which helps vocals sound brighter and more present.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Two professional quality Clarett⁺ preamps Capture clear and powerful recordings with preamps that bring masses of headroom, low distortion and ultra-low noise
- Make vocals shine with All-analogue Air Premium, relay-controlled analogue circuitry on every preamp emulates the classic ISA 110 by switching the impedance to 2.2kΩ and adding two cumulative high shelves, totaling a 4dB boost in the high frequencies
- New and improved A-D and D-A converters Capture more accurate recordings wherever you are, with extremely high-performance, independent A-D and D-A converters that deliver extremely low noise, low distortion and high dynamic range
- Powerful and transparent headphone output Create your best mixes and recordings, and inspire amazing performances with an improved headphone output that provides a flat frequency response at all levels with any type of headphones
- JFET instrument inputs Dedicated, ultra-high-impedance JFET instrument inputs, with extremely wide audio bandwidth, mimic guitar amp inputs to preserve the natural tone of guitars and capture their true character
- ADAT optical input Expand Clarett⁺ 2Pre to make the most of ADAT-compatible outboard equipment such as Clarett OctoPre, with eight channels of digital expandability: perfect for every stage of your creative journey
Full Specifications
| Brand | Focusrite |
|---|---|
| Impedance | 2.2 kiloohms |
| Unit Count | 1 Count |
| Audio Input | XLR, 1/4" |
| Connectivity | USB-C |
| Model Number | AMS-CLARETT-PLUS-2PRE |
| Compatibility | PC, Mac |
| Item Type Name | Clarett+ 2Pre 10-in / 4-Out Audio Interface |
| Compatible Devices | Microphone, Instrument, Personal Computer, Headphones, Studio Monitors |
| Frequency Response | 35 KHz |
| Number of Channels | 10 |
| Supported Software | All audio recording software |
| Included Components | Clarett⁺ 2Pre, 2 x USB Cable to support standard USB connector and USB Type C connector, Power Supply |
| Maximum Sample Rate | 192 KHz |
| Warranty Description | 3 year. |
| Connectivity Technology | USB |
| Manufacturer Part Number | AMS-CLARETT-PLUS-2PRE |
| Global Trade Identification Number | 00815301001416 |
| Full listing title | Focusrite Clarett+ 2Pre USB-C Bus-Powered Audio Interface for Music Production, with Two Professional Quality Pre-Amps and Powerful and Transparent Headphone Outputs/Instrument Inputs | Bus-powered, 2 Clarett Mic Preamps, Hi-Z JFET Inputs, 4 Balanced Outputs, ADAT Expansion, Air Mode, 24-bit/192kHz, 124dB |
Ready to buy?
Focusrite Clarett+ 2Pre USB-C Bus-Powered Audio Interface for Music Production, with Two Professional Quality Pre-Amps and Powerful and Transparent Headphone Outputs/Instrument Inputs | Bus-powered, 2 Clarett Mic Preamps, Hi-Z JFET Inputs, 4 Balanced Outputs, ADAT Expansion, Air Mode, 24-bit/192kHz, 124dB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best First Upgrades for a Prebuilt Gaming PC in 2026
- AMD Instinct MI300X vs Radeon RX 7600 XT: Datacenter vs Desk
- $1,200 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- Best AM4 CPU Cooler in 2026: 5 Picks for Ryzen Builds
- Crucial BX500 vs Samsung 870 EVO: Best Budget 1TB SATA SSD for Gaming in 2026
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Direct3D vs OpenGL vs Glide: The API War That Shaped PC Gaming
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- Qwen 3.6 27B on 16GB: RTX 5060 Ti 16GB vs RX 9060 XT 16GB by Quant (2026)
- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- Black Friday Mini PC Deals 2026: Best Picks for Local LLMs
- Best Budget 4K Gaming Monitor for an RTX 3060: KOORUI vs Samsung Odyssey
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Mac Unified Memory for LLMs: What Matters in 2026
- Ryzen 9 9950X3D2 vs Ryzen 7 5800X: Is the Upgrade Worth It?
- Best Cooling for AMD Ryzen Overclocking in 2026
- The Best Retro Game Emulators for Mac in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090