Guitar Pedal Power Supply DC 9V 1A (10mA -1000mA) Center Negative
Bottom line: The pigtone Guitar Pedal Power Supply DC 9V 1A Center Negative: Up to 1000mA at 9V DC, enough headroom for digital and multi-effect pedals; main trade-off: single 9V output only; no 12V or 18V for higher-voltage pedals.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Up to 1000mA at 9V DC, enough headroom for digital and multi-effect pedals
- ✓ Universal 100-240V, 50/60Hz input works on most mains supplies worldwide
- ✓ Standard 5.5x2.1mm center-negative plug fits most guitar pedal brands
- ✓ Powers up to 8 pedals at once with a 1-to-8 daisy chain cable
- ✓ Ferrite ring on the 43-inch (110cm) cable helps reduce noise
Cons
- ✗ Single 9V output only; no 12V or 18V for higher-voltage pedals
- ✗ Daisy-chained pedals all share one 1000mA current budget
- ✗ Center-negative only; center-positive gear needs a different supply
- ✗ No isolated per-pedal outputs like multi-output pedalboard supplies
Manufacturer description
The pigtone Guitar Pedal Power Supply gives you a clean, dedicated 9V DC source for your effects chain without burning through batteries. It delivers up to 1000mA, so it can run anything from a 10mA fuzz to current-hungry digital delay, reverb and multi-effect pedals. The output uses the industry-standard 5.5x2.1mm barrel plug wired center negative (-), the polarity most guitar pedal brands use. It also works with center-negative keyboards. The universal 100-240V, 50/60Hz input means the same adapter works on most mains supplies, at home or on tour. Need to power a full board? Add a 1-to-8…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for pigtone Guitar Pedal Power Supply DC 9V 1A Center Negative, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Up to 1000mA at 9V DC, enough headroom for digital and multi-effect pedals"; the main trade-off is "Single 9V output only; no 12V or 18V for higher-voltage pedals". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this power supply work with my Boss or other standard guitar pedals?
It works with any pedal that takes 9V DC through a 5.5x2.1mm center-negative jack and draws between 10mA and 1000mA. That covers most guitar pedal brands. Check your pedal's power jack label to confirm the polarity and voltage.
Can I power multiple pedals with one adapter?
Yes. Paired with a 1-to-8 way daisy chain cable, it can power up to 8 pedals at once. The 1000mA maximum is shared across the chain, so add up each pedal's current draw and keep the total under 1000mA.
Is a daisy chain cable included in the box?
The listing describes using this adapter with a 1-to-8 daisy chain cable but does not clearly state that one is included. Check the current product listing for the exact package contents before you buy.
Can I use it outside the US?
The adapter accepts AC 100V-240V at 50/60Hz, which covers most mains supplies worldwide. Depending on the country, you may need a plug-shape adapter for the wall outlet.
Does it add hum or noise to my signal?
pigtone builds in noise reduction and isolation safety protection, and the 110cm cable has a magnetic ferrite ring at the plug end to cut noise further. Results still depend on your pedals and how the chain is wired.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Input: AC 100V-240V, 50/60 Hz
- Output: DC 9V1A (10-1000mA) MAX: 1000mA, Center Negative(-), External Positive(+), DC Plug Size Of 5.5x2.1mm
- This product is compatible with guitar pedals with currents ranging from 10mA to 1000mA,paired with a 1to8 Way daisy chain cable, it can simultaneously supply power to 8 guitar pedals
- Intelligent and professional integrated circuit chips, equipped with noise reduction and isolation safety protection performance,the magnetic ring at the end of the adapter cable can further reduce noise
- The length of the adapter cable is 110cm/43inch, suitable for most brands of guitar pedals (center negative), and can also provide power to keyboards (center negative)
Full Specifications
| Brand | pigtone |
|---|---|
| Color | Black |
| Input | AC 100V-240V, 50/60 Hz |
| Output | DC 9V1A (10-1000mA) MAX: 1000mA, Center Negative(-), External Positive(+), DC Plug Size Of 5.5x2.1mm |
| Current | DC |
| Voltage | 9 volts |
| Wattage | 12 watts |
| Amperage | 1 A |
| Plug Type | Type A- US style |
| Model Name | 9V1A+1TO8 |
| Power Plug | Type A - 2 pin (North American) |
| Unit Count | 1 Count |
| Form Factor | Multi-output adapter |
| Model Number | 9V1A+1TO8 |
| Power Source | Corded Electric |
| Input Voltage | 120 volts_of_alternating_current |
| Mounting Type | Wall Mount |
| Built-In Media | 9V1A Adapter, 1to8 Way Daisy Chain Cable |
| Connector Type | 5.5mm x 2.1mm |
| Output Current | 1000 milliamps |
Ready to buy?
Guitar Pedal Power Supply DC 9V 1A (10mA -1000mA) Center Negative is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3.6 35B-A3B on a 12GB GPU: 95 tok/s on 4070 Super, 34 on 3060
- Upgrading From an RTX 3080 in 2026: What to Buy
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Four Frontier Models in Eight Days: What a 12GB RTX 3060 Can Actually Run
- Building a Modern BYOC LAN Party Box: 8 Period-Correct Rigs for QuakeCon-Style Events in 2026
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- Build Your Own Air Quality Monitor: Skip the $300+ Price Tag
- ViewSonic VX2730D-4K Review: 4K Gaming at 163 PPI and 144Hz
- ZOTAC RTX 3060 Twin Edge vs MSI Ventus 2X: Which 12GB Card for a Quiet Build?
- Best AM4 CPU for 1080p Gaming in 2026: 5 Value Picks
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
- Steam Deck OLED vs ROG Ally X vs Legion Go: 2026 Gaming Handheld Shootout
- Troubleshooting Sound Blaster Audigy FX Crackling and Driver Failures on WinXP (2026)
- Ryzen 9 9950X3D2 vs Ryzen 7 5800X: Is the Upgrade Worth It?
- Pelican-Style Filament Dry Box: The Adafruit Build, Explained
- GPT-5.6 Sol matches Fable 5 near one-third the cost
- Grok 4.3 vs GPT-5 vs Claude 4.7: Local Hardware Implications of the Closed-Model Intelligence Index
- Best Gaming Setup for Kids and Teens in 2026: 5 Picks
- AI Technologies We'll Realistically See in Our Lifetimes
- Local LLM Hardware in 2025: Picking GPUs, CPUs & RAM
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- Are We the Last Generation of PC Builders?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090