Chanzon 2pcs Wirewound Aluminum Shell Resistor 4 Ω ohm 100W ±5% Tolerance
Bottom line: The Chanzon 2pcs Wirewound Shell Resistor 4 Ω ohm 100W ±5% Tolerance: 4 ohm 100W wirewound rating handles dummy-load and speaker-crossover duty; main trade-off: +/-5% tolerance is loose for precision measurement work.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 4 ohm 100W wirewound rating handles dummy-load and speaker-crossover duty
- ✓ Aluminum shell mounts flat to a heatsink or cooling plate for heat dissipation
- ✓ Compact 70x29x15.5mm body fits tight amp and PSU chassis
- ✓ Non-inductive winding option available for audio crossover and divider use
Cons
- ✗ +/-5% tolerance is loose for precision measurement work
- ✗ Needs a heatsink or cooling plate to reach the full 100W rating
- ✗ Only 11mm of pin length outside the body limits wiring reach
- ✗ Fixed 4R value only, so you buy separate parts for other resistances
SpecPicks Verdict
SpecPicks scored Chanzon 2pcs Wirewound Shell Resistor 4 Ω ohm 100W ±5% Tolerance using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. CHANZON's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Fix Resistance : 4R ohms, Power : 100 W watt, Tolerance : 0.05 ±5%
- 2 Pieces Aluminum House Resistors for Heat Dissipation, Suitable for Cooling Plate Installation, Can be Used in Atrocious Environment.
- Dimension : 70x29x15.5mm/2.8x1.1x0.6 inch(L*W*H), Length Without Pin : 11mm, Small Size, high Power Load, Standard and Non-inductive Winding Types
- High Insulating Capacity, Good Performance in Vibration.
- Suitable for Inverter, LED Lights, Speakers, Frequency Divider, Servo Industry, Speaker Equipment and Other Industrial Control, Widely used in Power Supply, Transducer, Elevator, Arena Audio, Tail Light.
Full Specifications
| Brand | CHANZON |
|---|---|
| Dimension | 70x29x15.5mm/2.8x1.1x0.6 inch(L*W*H), Length Without Pin : 11mm, Small Size, high Power Load, Standard and Non-inductive Winding Types |
| Dimensions | 70x29x15.5mm |
| Fix Resistance | 4R ohms, Power : 100 W watt, Tolerance : 0.05 ±5% |
| Vibration/Rumble | Yes |
Ready to buy?
Chanzon 2pcs Wirewound Aluminum Shell Resistor 4 Ω ohm 100W ±5% Tolerance is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Pi Zero W Retro Handheld in 2026: Full Parts List and Setup
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Best Retro Gaming Gifts in 2026: 5 Picks for Console and PC Collectors
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- RTX 3090 24GB vs RTX 4060 Ti 8GB in 2026: Used VRAM or New Efficiency?
- How to run Qwen 3 32B on Apple M4 Max
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Forza Horizon 6 on Steam Deck: Best Dock and Controller Setup for 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- Noctua NH-U12S vs MasterLiquid ML240L for a Ryzen 7 5800X
- Build a Raspberry Pi 4 Pi-hole + Unbound Ad-Blocker in 2026
- Prime Big Deal Days 2026 GPU Deals for Local LLMs: 12GB vs 16GB Cards
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Realistic tok/s Numbers
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- AMD Ryzen AI Halo ($4K) vs a $900 RTX 3060 12GB Local-LLM Build: Buy or Build?
- RTX 3060 12GB: Ollama vs llama.cpp vs vLLM Token Speed (2026)
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- Intel Arc B390 Handhelds vs Steam Deck: The Predator Atlas 8
- Best CPU Cooler for Intel Core i7/i9 Builds in 2026
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Imaging Vintage IDE Drives to Preserve 90s Game CDs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090