4010 Cooling Fan Axial Low Noise 12V DC Hydraulic Bearings Brushless Fan Cooler Low Noise 0.12A 40mm x 40mm x 10mm.(Pack of 2PCS-12V)
Bottom line: Per its Amazon listing, the 4010 Cooling Fan Axial Low Noise 12V DC Hydraulic Bearings Brushless ($14.98 on Amazon as of 2026-11-21 11:22 UTC): 1、Size:40mm x 40mm x 10mm (L x D x H); the life expectancy is about 45,000 hours.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 1、Size:40mm x 40mm x 10mm(L x D x H).
- ✓ Backed by GBA-SZC's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
4010 FanRated Voltage : DC:12VRated Current:0.15 Ampplusmn10%Dimesions:40mm(L) x 40mm(W) x 10mm(H)Rated Speed:5000Rotating speed10%Note: Rotation speed does not represent noise and Wind forceNoise Level:20dBAplusmn10%Bearing Type:Hydraulic bearingsLife:45000 hoursCable Lenght :100cm (Original wire length:25cm. Extension wire 75cm.)Packing List:12V 4010 Fan x 2
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 4010 Cooling Fan Axial Low Noise 12V DC Hydraulic Bearings Brushless…, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1、Size:40mm x 40mm x 10mm(L x D x H).
- 2、Low noise.This cooling fan will not make you feel uneasy during they are working.
- 3、High quality Hydraulic bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
- 4、The Brushless case Cooling Fan is a great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer.
- 5、Made of high quality plastics with high end bearings,for days at high speeds without hassle or concern.
Full Specifications
| Brand | GBA-SZC |
|---|---|
| Model | 1 |
| Voltage | 12 Volts |
| Wattage | 2 watts |
| 1、Size | 40mm x 40mm x 10mm(L x D x H). |
| Material | Metal |
| Unit Count | 2.0 Count |
| Noise Level | 20 Decibels |
| Part Number | 1 |
| Material Type | Metal |
| Cooling Method | Air |
| Number of Items | 1 |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 5000 RPM |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
Benchmark data for other processors
Ready to buy?
4010 Cooling Fan Axial Low Noise 12V DC Hydraulic Bearings Brushless Fan Cooler Low Noise 0.12A 40mm x 40mm x 10mm.(Pack of 2PCS-12V) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Cooler for the Ryzen 7 5800X: NH-U12S vs ML240L vs AIRCOM S7
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
- $1,200 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- Gemma 4 26B-A4B on a 16GB GPU: RTX 5060 Ti 16GB vs RTX 3060 12GB Quant Table (2026)
- How to run Llama 3.1 8B on AMD Radeon RX 7900 XTX
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- GeForce FX 5900 Ultra vs Radeon 9800 Pro: The 2003 DirectX 9 Showdown Revisited
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- RE Requiem and the AAA Games That Prove Steam Deck
- RetroArch PS3 Emulation: What Actually Works in 2026
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- How to run Llama 3.1 70B on Apple M4 Max
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Imaging Vintage IDE and SATA Drives in 2026: The Vantec CB-ISATAU2 Workflow
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- Best Raspberry Pi Alternative for AI Inference in 2026: When to Step Up
- Local LLM Image Generators: Best AMD GPUs in 2025
- Best Budget SSD for PS5 and Steam Download Cache in 2026
- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- Black Friday SSD Deals: 5 NVMe and SATA Drives Worth Buying
- When a Game Boy Clone Runs Too Fast: The Crystal-Swap Fix Behind a Viral Repair
- GLM-5.2 vs Frontier Models on GDPval-AA: What It Means for Local Builders
- Best Budget SSDs for Gaming PCs and Consoles in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090