TUOLNK RG58 PL259 UHF Coaxial Cable
Bottom line: The TUOLNK RG58 PL259 UHF Coaxial Cable: 2-pack at 9.99 USD, so roughly 5 dollars per 12-inch jumper; main trade-off: 12 inches only, too short for any real antenna feedline run.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2-pack at 9.99 USD, so roughly 5 dollars per 12-inch jumper
- ✓ Pure copper center conductor, not copper-clad aluminum
- ✓ Nickel-plated brass shells survive repeated mate/unmate cycles
- ✓ 50 ohm impedance matches standard two-way radio and CB feedlines
Cons
- ✗ 12 inches only, too short for any real antenna feedline run
- ✗ RG58 loses more signal than RG213 or LMR-400 above 400 MHz
- ✗ Both ends are UHF male, so you need an SO239 barrel to join two
- ✗ PL259 is not weather-sealed, needs tape for outdoor use
Manufacturer description
The TUOLNK RG58 PL259 UHF coaxial cable is a 12-inch (30cm) jumper built for the short hops that matter in a radio setup: rig to tuner, antenna analyzer to feedline, scanner to a rooftop run. Each end terminates in a UHF male PL259 connector that threads into any standard SO239 socket, and the 50-ohm RG58 construction with a pure copper conductor keeps insertion loss low across the HF and VHF ranges where this cable earns its place. Connector shells are nickel-plated brass, so repeated mating cycles on a bench or in a mobile install do not chew up the threads. TUOLNK ships it as a 2-pack…
SpecPicks Verdict
SpecPicks scored TUOLNK RG58 PL259 UHF Coaxial Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. TUOLNK's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this connect to my radio's SO239 antenna jack?
Yes. Both ends are UHF male PL259 connectors, which thread directly onto the SO239 female socket found on most two-way radios, CB rigs, and antenna tuners.
How many cables come in the package?
Two. TUOLNK ships this as a 2-pack of PL259 male to PL259 male RG58 jumpers, each 12 inches (30cm) long.
What is the impedance, and will it work with CB?
It is 50 ohm, which is the standard impedance for CB, amateur, and two-way radio systems. Listed applications include CB radio, scanners, and antenna analyzers.
Is the center conductor real copper or copper-clad?
TUOLNK lists the conductor material as pure copper and the connector material as nickel-plated brass. RG58 is the cable type.
Do I need tools or a soldering iron to install it?
No. The PL259 connectors are pre-terminated and hand-tighten onto SO239 sockets, so installation is plug and play with no tools required.
Key Features
- Cable Type and Details: UHF jumper cable; Cable type: RG58; Conductor material: pure copper; Connector material: nickel plated; Cable length: 12inch(30cm); Impedance: 50 ohm, Low-loss
- Durability and Performance: The connector is made of pure brass to ensure it's durability and recycling usage. The cable type is RG58 to ensure good conductivity and signal transmission,with highly resistant to signal interference
- Application: This product is widely used in Two Way Radio, Antennas, Radio Scanner, Car Transmitter, CB Radio, Antenna Analyzer, Wi-Fi Radios, GPS antenna, RF device, Wireless Infrastructure Test equipment etc
- Package Includes: 2 pack of PL259 Male to PL259 Male RG58 extension cable (Connector 1: UHF Male, Connector 2: UHF Male)
- Easy to Install: The user-friendly design of TUOLNK coaxial cable saves time and effort, and the installation process does not require any tool, plug and play. Say goodbye to complex installations and provide smooth and reliable connections for your needs
Full Specifications
| Brand | TUOLNK |
|---|---|
| Color | Black |
| Model | 58RG6-30cm |
| Wattage | 50 watts |
| Frequency | 3000 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | 58RG6 |
| Unit Count | 2 Count |
| Item Length | 12 inches |
| Part Number | 58RG6-30cm |
| Connectivity | Wireless, WiFi |
| Connector Type | RF Connector |
| Number of Pins | 2 |
| Connection Type | Wireless |
| Maximum Current | 1 A |
| Maximum Voltage | 1000 volts |
| Number of Items | 2 |
| Connector Gender | UHF Male to UHF Male |
| Package Includes | 2 pack of PL259 Male to PL259 Male RG58 extension cable (Connector 1: UHF Male, Connector 2: UHF Male) |
| Full listing title | TUOLNK RG58 PL259 UHF Coaxial Cable, Low Loss UHF Male to PL259 Male SO239 Jumper Extension Cable for Two Way Radio, Wireless LAN Devices 12inch (30cm) |
Ready to buy?
TUOLNK RG58 PL259 UHF Coaxial Cable, Low Loss UHF Male to PL259 Male SO239 Jumper Extension Cable for Two Way Radio, Wireless LAN Devices 12inch (30cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Mac for running local LLMs in 2026
- 9800X3D Build: RTX 5080 vs 5070 Ti vs 9070 XT at 1440p
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- Best SSD for Steam Deck and Handheld PCs in 2026
- Best SSD to Upgrade a PS4 Pro: Crucial BX500 vs Samsung 870 EVO Real-World Gains
- Best AM4 Gaming CPU in 2026: Ryzen 7 5800X vs 3700X vs 3900X vs Intel i7-9700K
- Best SSD for 2000s LAN Party PC Builds (2026)
- Fish Audio S2.1 Pro vs Local TTS on an RTX 3060
- RTX 3060 12GB for 1080p 240Hz Esports: CS2, Valorant, Apex
- Logitech G920 vs HORI Overdrive for Sim Racing in 2026
- Noctua NH-U12S vs MasterLiquid ML240L for a Ryzen 7 5800X
- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Best GPU for Local Stable Diffusion at 1080p/1440p in 2026
- Best SATA SSD for Gaming and Everyday Upgrades in 2026
- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
- Best Budget SATA SSD for Gaming in 2026
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Is the RTX 3060 12GB Still the Best Sub-$400 AI Card in 2026?
- AMD Ryzen 7 5800X3D Re-Review: DDR4's Last Gaming Champion in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090