GEMEK 10ft N Male to SMA Male Cable
Bottom line: The GEMEK 10ft N Male to SMA Male Cable ($19.98 on Amazon as of 2026-10-20 22:24 UTC): LMR-240-size 0.240 in coax with a larger center conductor than thin jumpers; main trade-off: fixed 10ft length: too long for tight jumpers, too short for long runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ LMR-240-size 0.240 in coax with a larger center conductor than thin jumpers
- ✓ Double-shielded 50 ohm build to reduce interference on RF runs
- ✓ All-copper, gold-plated SMA male and N male connectors with heat shrink
- ✓ Coils to a 1.5 in minimum diameter; 90 degree bends in 1 in or less
- ✓ Rated -40°C to +85°C for indoor or enclosure installs
Cons
- ✗ Fixed 10ft length: too long for tight jumpers, too short for long runs
- ✗ Standard SMA male, so it will not mate with RP-SMA router ports
- ✗ Both ends are male; your gear needs SMA female and N female ports
- ✗ Thinner than LMR-400, so it loses more signal on long runs
Manufacturer description
The GEMEK 10ft SMA Male to N Male cable connects SMA-equipped gear to N-style antennas over a short, low-loss run. Typical uses include a cellular modem, WiFi router, GPS receiver or signal booster repeater. The coax is double-shielded, 50 ohm, LMR-240-size cable called KMR240, with a 0.240 inch diameter. Its larger center conductor holds signal better at higher frequencies than thin RG-style jumpers. Both ends use all-copper, gold-plated connectors, with heat shrink at each end where the cable meets the connector. The cable is rated from -40°C to +85°C. It coils down to a 1.5 inch minimum…
SpecPicks Verdict
SpecPicks scored GEMEK 10ft N Male to SMA Male Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. GEMEK's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cable work with an RP-SMA WiFi router?
No, not directly. One end is a standard SMA male plug, which needs a standard SMA female jack. Many consumer WiFi routers use RP-SMA, so check your router's connector before you buy, or add an RP-SMA adapter.
What connectors does my equipment need to use this cable?
Your device needs an SMA female port and your antenna or booster needs an N female port. The cable has an SMA male plug on one end and an N male plug on the other, both 50 ohm.
How far can I run LMR-240-size cable before signal loss becomes a problem?
Per GEMEK, LMR-240-size coax works well for WiFi and cellular runs up to 25-30 feet, and for HF/VHF/UHF installs up to 150 feet. This 10ft cable is well inside the WiFi and cellular range.
Can I route this cable around tight corners?
Yes. The listed minimum coiling diameter is 1.5 inches, and the cable can make a 90 degree bend in one inch or less without loss.
Is this cable suitable for outdoor or cold-weather use?
The cable is rated from -40°C to +85°C, and both ends have heat shrink. The listing does not give a waterproof rating, so seal outdoor connections with weatherproofing tape or a boot.
Key Features
- ✔Connector: All-copper SMA Male to N Male adapter.
- ✔Connect from SMA Equipment to N-Style Antennas, receivers, meters, radio transmitters and WiFi Signal Booster Repeater.
- ✔10 feet Low-Loss KMR240 Size Coax, Impedance: 50 ohm. KMR240 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use.
- ✔Double Shielded Coax extension cable assemblies are constructed with top quality extremely low-loss KMR240 cable and gold plated connectors. High frequency low loss and low impedance, heat Shrink on Both Ends.
- ✔Compatible with all SMA female to n female based equipment including modems and routers & WiFi Signal Booster Repeater from Cisco, Digi, Cradlepoint, Proxicast, Pepwave, Sierra Wireless, Sixnet/Red Lion and many others.
Full Specifications
| Brand | GEMEK |
|---|---|
| Color | Black |
| Model | SMA Male to N Male Cable |
| Frequency | 5 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | 10ft SMA Male to N Male Cable |
| Unit Count | 1 Count |
| Item Length | 10 feet |
| Part Number | GD0200 |
| Connectivity | Wireless, WiFi |
| ✔Connector | All-copper SMA Male to N Male adapter. |
| Connector Type | N Male, Sma Male |
| Number of Pins | 1 |
| Outer Material | Plastic |
| Connection Type | Wireless |
| Number of Items | 1 |
| Special Feature | Low Loss |
| Connector Gender | Male-to-Male |
| Compatible Devices | Modem, Router |
| Full listing title | 10ft N Male to SMA Male Cable, SMA to N Cable 50 ohm Ultra Low Loss KMR240 Coaxial Cable for WiFi Router, GPS Receiver, Antenna, Signal Booster Use |
Ready to buy?
10ft N Male to SMA Male Cable, SMA to N Cable 50 ohm Ultra Low Loss KMR240 Coaxial Cable for WiFi Router, GPS Receiver, Antenna, Signal Booster Use is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Which GPU Runs Which LLM in 2026: The RTX 3060 12GB Model-Fit Matrix
- RTX 3060 12GB vs RTX 4090 for Local LLMs (2026): Is 2x VRAM Worth the Price Jump?
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- RTX 3060 12GB vs Intel Arc B580 for Stable Diffusion
- Best Controller for PC and Steam Gaming in 2026: G7 SE vs 8BitDo Pro 2 vs DualSense
- Run Soofi S 30B Locally: What a 12GB RTX 3060 Can Actually Do
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- MSI RTX 3060 Ventus vs ZOTAC RTX 3060 Twin Edge: Which 12GB Card to Buy
- Raspberry Pi Locator Website to Shut Down in July 2026
- Open Weights Are Reshaping Agentic Coding: A 2026 Local-Rig Reality Check
- Prime Day 2026: Gaming Monitor and Logitech Peripheral Deals to Watch
- Best Sim Racing Wheel Setup for Beginners in 2026
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Best Webcam for PC Game Streaming Under $100 (2026)
- Qwen3.6-27B at 80 TPS on RTX 5090: Is the Claim Real?
- Best SSD for a Local LLM Model Library in 2026: Capacity vs Load Speed
- Open-WebUI on an RTX 3060: A Self-Hosted ChatGPT in 2026
- Best Raspberry Pi Setup for Home Assistant in 2026
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- PFlash on a Single RTX 3090: 10× Prefill Speedup at 128K Context vs llama.cpp
- ChatGPT Full-Duplex Voice: What Real-Time Speech Needs on Your Desk
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090