Chanzon 40pcs 30cm Long Male to Female Ribbon Jumper Wire Dupont Cable Line
Bottom line: The Chanzon 40pcs 30cm Long Male to Female Ribbon Jumper Wire Dupont: 40 male-to-female Dupont wires with 30cm reach for Arduino and Raspberry Pi projects; main trade-off: only 40 wires per pack; larger builds may need several sets.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 40 male-to-female Dupont wires with 30cm reach for Arduino and Raspberry Pi projects
- ✓ 11-core tinned copper resists oxidation and solders cleanly, unlike copper-clad aluminum
- ✓ Standard 2.54mm pitch seats snugly in breadboard holes and pin headers
- ✓ 24 AWG rated up to 1A, separable into single strands and re-solderable after cutting
Cons
- ✗ Only 40 wires per pack; larger builds may need several sets
- ✗ Male-to-female only, no male-male or female-female leads included
- ✗ 1A current ceiling suits signal and light loads, not motors
- ✗ 30cm length adds clutter on compact breadboard layouts
SpecPicks Verdict
SpecPicks scored Chanzon 40pcs 30cm Long Male to Female Ribbon Jumper Wire Dupont… using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. CHANZON's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Premium Quality: Sturdy male tinned copper pins never fall off, Female pins are perfectly fit for the Male one ,accurate hole-pitch: 2.54 mm. Our 11 core copper wire with low resistance have a better conductivity and more reliable than copper-clad aluminium one.
- Max current is up to 1A with 24awg wire, The entire jumper wire have been tinned, can be cut from between and resolder. You can flexibly separate them into 1 individual wire perfect for various applications.
- Compatible with arduino, breadboard, raspberry pi, prototyping, parallax, PCB project, DIY experiment, electronic project, etc.
- Product: Ribbon. Type: male to female. Length: 30cm. The wire gauge: 24 AWG. Color: multicolored, standard color scheme. 2.54mm pitch headers and socket, proper diameter to fit in the holes of breadboard.
- Material: Tinned copper is primarily used for protection against oxidation and corrosion, good for soldering. Package: Comes with 1 x 40pin 30cm M-F multicolored jumper wire.
Full Specifications
| Brand | CHANZON |
|---|---|
| Color | (2) Male to Female (40pcs) |
| Gauge | 24 |
| Model | DBX-FB07-24AWG-30CM-MDF-DX-40P-1 |
| Strands | 11 strands |
| Material | Copper |
| Unit Count | 1 Count |
| Part Number | DBX-FB07-24AWG-30CM-MDF-DX-40P-1 |
| Material Type | Copper |
| Number Of Wires | 40 |
| Number of Items | 40 |
| Number of Cable Strands | 11 strands |
| Full listing title | Chanzon 40pcs 30cm Long Male to Female Ribbon Jumper Wire Dupont Cable Line | 40 pin Ribbon Solderless Multicolored | 24 AWG Tinned Copper | For Arduino/Raspberry Pi/Breadboard/PCB |
Hardware benchmark data
Ready to buy?
Chanzon 40pcs 30cm Long Male to Female Ribbon Jumper Wire Dupont Cable Line | 40 pin Ribbon Solderless Multicolored | 24 AWG Tinned Copper | For Arduino/Raspberry Pi/Breadboard/PCB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- Can a Modern Sound Blaster G6 Replace an AWE64 for Retro PC Audio?
- GTX 1050 Ti 4GB vs Ryzen 5 5600G iGPU: Which Actually Runs Qwen3 4B?
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- Gemini 3.5 Flash vs Local LLMs on a 12GB GPU: When Cloud Wins
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- Muse Spark 1.1 Beats GLM-5.2 at Coding — Does It Change the Local-Rig Question?
- How to run Qwen 3 32B on Apple M3 Ultra
- Grok 4.5, GPT-5.6, Kimi K3: four frontier models in eight days — what it means for local rigs
- Best CPU Cooler for Intel Core i7/i9 Builds in 2026
- Best SATA SSDs Under $100 in 2026: 5 Picks for Boot Drives, Upgrades, and Retro PCs
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- Open-WebUI Self-Hosted on a Ryzen 5 5600G + RTX 3060: A Private ChatGPT at Home
- Benchmarking Asus Tablet Repairability Scores 2026
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Best Sound Card and DAC for Competitive FPS Players in 2026
- Intelligence Index v4.1 Goes Agentic: Can a 12GB RTX 3060 Keep Up Locally?
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- Raspberry Pi Pico SDK 2.3.0 Ships: What Changed
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Best CPU for Streaming and Gaming on AM4 in 2026
- BOSGAME VTA-439: A Linux-Friendly Ryzen AI 9 HX 470 Mini PC
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090