ESD Soldering Mat - Heat Resistant Anti-Static Table Mat - with Grounding Cord (36" x 108" (3' x 9'), Gray)
Bottom line: Per its Amazon listing, the Scientific Americas ESD Soldering Mat: top Dissipative Layer (0.5mm thickness), Bottom Conductive Layer (1.5mm thickness); total Thickness: 2MM.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Product Details:Durable and high quality mat with heat, chemical, and wear-resistance. The design features two layers of natural rubber.What is ESD?Static, formally referred to as electrostatic charge, arises from excess of electrons on one surface and a deficiency on the other.The imbalance of electrons thus causes an electrical field that is capable of influencing other objects at a distance.The charge will remain in place unless it has a path through which it can flow. It may remain in place for some time and this gives rise to the term "static electricity".The word static simply means…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Scientific Americas ESD Soldering Mat, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
- Top Dissipative Layer (0.5mm thickness), Bottom Conductive Layer (1.5mm thickness). Total Thickness: 2MM.
- Resistance: RTT: 3.8 x 10^6Ω to 1 x 10^8Ω, RTG: 2.4 x 10^7Ω to 1 x 10^8Ω, Surface: <10^4Ω to <10^7Ω.
- Heat resistance (600oF, 10 sec no smell, no melt)
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Gray |
| Resistance | RTT: 3.8 x 10^6Ω to 1 x 10^8Ω, RTG: 2.4 x 10^7Ω to 1 x 10^8Ω, Surface: <10^4Ω to <10^7Ω. |
| Part Number | 2V1 |
| Number of Items | 1 |
Ready to buy?
ESD Soldering Mat - Heat Resistant Anti-Static Table Mat - with Grounding Cord (36" x 108" (3' x 9'), Gray) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Aider vs Cline vs Continue.dev for Local Coding on an RTX 3060 (2026)
- Ryzen 9800X3D Idle Temp: What's Normal (2026 Guide)
- KOORUI 27" 4K vs Samsung Odyssey 4K: Best 27-Inch Panel for PC and Console
- Best Bluetooth Controller for Switch and Retro Emulation on Steam Deck (2026)
- $400 Qwen 3.6-27B Setup: Is the Dual RTX 3060 Claim Real?
- Best GPU for Llama 3.1 8B (2026)
- Best Beginner Racing Wheel in 2026: Logitech G920 vs HORI Racing Wheel Overdrive
- RTX 3060 12GB vs RTX 5060: Best Value for 1080p Gaming + Local AI
- Best Gaming Mouse Pad for Esports and Productivity (2026)
- Best Budget Ryzen Gaming PC Parts in 2026: 5 Picks That Punch Up
- Irtysh 32-Core CPU: Is the 30+ FPS Witcher 3 Claim Real?
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- How to run Llama 3.1 70B on Apple M4 Pro
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- Is the RTX 5050 Really as Bad as Everyone Says?
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Ryzen 5 5600G vs Ryzen 7 5700X for a 2026 Home Lab
- AI-Driven Vintage Driver Install on WinXP: Using Vision-LLM to Walk a Voodoo + Audigy Setup
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Old RAM Identification: Decode Part Numbers & Specs
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090