NFHK
PCI-E 3.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD 2260 Adapter
Bottom line: The NFHK PCI-E 3.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Host Adapter is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ This convertor expands the system by one SFF-8612 interface.
- ✓ Backed by NFHK's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
PCI-E 3.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD This converter extends the system with an SFF-8612 interface. It can be connected, for example an SSD using an optional cable. The card transmits PCI Express signals using NVMe protocol. Connector specifications: 1 x OCuLink SFF-8612 Female 1 x 67 Pin M.2 Key M Male Data transfer rate up to 32Gbps Bootable, ex UEFI version 2.3.1. Supports NVM Express (NVMe) 1.2 System Requirements Linux Kernel 4.3 or higher Windows 8.1/8.1-64/10/10-. 64A M 2 interfaces with M key
SpecPicks Verdict
SpecPicks scored NFHK PCI-E 3.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Host Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. NFHK's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This convertor expands the system by one SFF-8612 interface.
- It can be connected e.g. one SSD by using an optional cable.
- It can be connected e.g. one SSD by using an optional cable.
- Linux Kernel 4.3 or above
- Windows 8.1/8.1-64/10/10-64
Full Specifications
| Brand | NFHK |
|---|---|
| Color | Red NVME 2280 to SFF-8611 |
| Model Number | SF-023 |
| Compatibility | Linux |
| Warranty Type | Limited |
| Connector Type | pci express |
| Item Dimensions | 3.94 x 3.94 x 0.39 inches |
| Mfr Part Number | NF6-SF-023 |
| Number of Items | 1 |
| Number of Ports | 1 |
| Power Plug Type | No Plug |
| Compatible Devices | PC, SSD |
| Item dimensions L x W x H | 3.94 x 3.94 x 0.39 inches |
| Specific Uses For Product | PC |
Ready to buy?
PCI-E 3.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD 2260 Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Coolers for Ryzen and Intel Builds in 2026
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Period-Correct Windows 98 Boot Drive: CompactFlash vs IDE SSD
- Best Game Controller for PC in 2026
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- Best Raspberry Pi Alternative for Home Assistant (2026)
- Troubleshooting a Vintage WinXP Retro PC That Won't Boot: Driver Verifier, BIOS, and IDE Recovery
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Real tok/s and What Fits
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- Claude Fable 5 Burns 117k Tokens/Task: Can a Local RTX 3060 Keep Up?
- GeForce 4 Ti 4200 AGP: The Best-Value Retro GPU for a 2002 Windows XP Build
- Mistral AI Seeks €3 Billion to Fund Its European Push — The Local-vs-Cloud Angle
- When Does a Homelab Become a Job?
- Is vLLM Worth It If You're Not Serving Other Users?
- How to Decode Modern Monitor Names: A 2026 Buyer's Translation Guide
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- HiDream-O1-Image on an RTX 3060 12GB: Does It Fit?
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Complete Ollama Installation Guide for 2026: Hardware & Software Setup
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Started a Homelab a Month Ago: Am I Doing It Right?
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Air vs AIO for the Ryzen 7 5800X: is the Noctua NH-U12S enough?
- Run Qwen Locally: Apple Silicon vs a 12GB RTX 3060 Rig in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090