Skip to main content
HEMUDU Single Desk Monitor Arm Mount Stand Fit for 13 inch to 32 inch Flat Curved Computer Screen with Swivel, Height Adjustable, Rotation,Holds up to 77lbs, Black
Hemudu

HEMUDU Single Desk Monitor Arm Mount Stand Fit

Bottom line: The HEMUDU Single Desk Monitor Arm Mount Stand Fit: Handles up to 77lbs - far above most 32-inch panels; main trade-off: 32-inch ceiling rules out 34-inch and 49-inch ultrawides.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Handles up to 77lbs - far above most 32-inch panels
  • ✓ Fits 13-32 inch flat or curved screens, VESA 75x75 and 100x100
  • ✓ 360-degree rotation supports portrait mode for code and documents
  • ✓ Plus/minus 50-degree tilt and 45-degree swivel for eye-level setup
  • ✓ Built-in cable clip routes wires down the pole, not across the desk

Cons

  • ✗ 32-inch ceiling rules out 34-inch and 49-inch ultrawides
  • ✗ Pole-style height adjust is less fluid than gas-spring arms
  • ✗ Single-monitor only - no second arm or expansion option
  • ✗ Cold-rolled steel adds weight versus aluminum arms

Manufacturer description

The HEMUDU single monitor arm mount replaces a bulky factory stand with a clamp-on steel pole that frees the footprint underneath your screen. It fits flat and curved displays from 13 to 32 inches and supports VESA 75x75mm and 100x100mm hole patterns, with a weight ceiling of 77lbs that covers virtually any panel in that size range, including heavier curved ultrawides and glass-front displays. Articulation is the reason to choose an arm over a riser. This Hemudu mount gives you 360 degrees of rotation for portrait or landscape work, plus or minus 50 degrees of tilt, plus or minus 45 degrees…

SpecPicks Verdict

SpecPicks scored HEMUDU Single Desk Monitor Arm Mount Stand Fit using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Hemudu's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this fit my 32-inch curved monitor?

Yes. Hemudu rates this arm for flat and curved screens from 13 to 32 inches, with VESA 75x75mm or 100x100mm mounting holes. Check your monitor's VESA pattern on the back panel before ordering.

How much weight can the arm actually hold?

It is rated to 77lbs, which is well beyond a typical 27 to 32 inch monitor. The arm is built from cold-rolled steel to hold position under load.

Can I rotate the monitor to portrait orientation?

Yes. The mount offers 360-degree rotation, so you can run the display vertically for coding, documents, or long web pages, plus 50 degrees of tilt and 45 degrees of swivel.

How long does installation take?

Hemudu states about 10 minutes, and all mounting hardware is included in the package. No separate hardware purchase is needed for standard VESA displays.

Key Features

  • monitor desk mount ☞ The single monitor desk arm stand fits for most flat or curved computer screens up to 32", holds up to 77lbs, compatible with VESA pattern 75x75mm and 100x100mm
  • Full Articulation Mount ☞ 360° Rotation, ±50° tilt up and down, ±45° swivel, height adjustable along the metal pole to provide ergonomic monitor viewing angle
  • Sturdy Construction ☞ Heavy-duty monitor desk mounts made from cold-rolled steel securely hold the monitor stable in any position. The single monitor stand features with cable clip to keep wires organized while free up more space on your desktop
  • ERGONOMIC VIEWING ☞ designed to elevate your monitor to a better viewing angle encouraging better posture for your neck and back while working long desk hours
  • Easy Installation ☞ The package includes all needed accessories. You can easily install the monitor mount in 10 mins

Full Specifications

BrandHemudu
ColorBlack
MaterialMetal
Unit Count1 Count
Model NumberHD04B-001
Mounting TypeTabletop Mount
Movement TypeArticulating
Mfr Part NumberHD04B-001
Number of Items1
Number of Packs1
Compatible DevicesMonitor
Enclosure MaterialMetal
Maximum Tilt Angle45 degrees
Maximum-Supported Screen Size32 inches
Minimum-Supported Screen Size13 inches
Full listing titleHEMUDU Single Desk Monitor Arm Mount Stand Fit for 13 inch to 32 inch Flat Curved Computer Screen with Swivel, Height Adjustable, Rotation,Holds up to 77lbs, Black

Ready to buy?

HEMUDU Single Desk Monitor Arm Mount Stand Fit for 13 inch to 32 inch Flat Curved Computer Screen with Swivel, Height Adjustable, Rotation,Holds up to 77lbs, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Home & Kitchen

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →