Skip to main content
be quiet! Light Wings 120mm PWM High Speed Low Noise Premium ARGB Cooling Fan | 4-Pin | Ideal for Radiators and Heat Syncs | Black | BL073
be quiet!

be quiet! Light Wings 120mm PWM High Speed Low Noise Premium ARGB Cooling Fan

Status: be quiet! Light Wings 120mm PWM High Speed Low…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The be quiet! Light Wings 120mm PWM High Speed Low Noise ARGB Cooling Fan: 18 LEDs on front and rear light the fan from both sides of a glass panel; main trade-off: 31dB(A) at the full 2,500rpm ceiling is audible in a quiet room.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 18 LEDs on front and rear light the fan from both sides of a glass panel
  • ✓ Rated 31dB(A) at its full 2,500rpm ceiling
  • ✓ Rifle bearing rated for 60,000 hours of operating life
  • ✓ 4-pin PWM lets the motherboard drop speed and noise at idle

Cons

  • ✗ 31dB(A) at the full 2,500rpm ceiling is audible in a quiet room
  • ✗ Ships as a single fan, so a 360mm radiator means buying three
  • ✗ ARGB control needs a motherboard addressable header; no inline controller
  • ✗ Listing contradicts itself on blade count: seven in one spec line, nine in another

Manufacturer description

The be quiet! Light Wings 120mm PWM High Speed is for builders who want ARGB lighting without giving up the quiet running the brand is known for. Eighteen LEDs illuminate both the front and the rear of the frame, so the glow reads from either side of a tempered-glass panel, and the lighting syncs with your motherboard's ARGB adjustments rather than requiring a separate controller in the loop. The silence-optimized blade design targets pressure rather than raw open-air airflow, which is why be quiet! positions this High Speed variant for radiators and heatsinks specifically. At its 2,500rpm…

SpecPicks Verdict

SpecPicks scored be quiet! Light Wings 120mm PWM High Speed Low Noise ARGB Cooling Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the PC & gaming hardware category. be quiet!'s PC & gaming hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the Light Wings 120mm fit a 240mm or 360mm radiator?

It is a standard 120mm fan sized for 120mm mounting points, so it fits 120mm, 240mm, and 360mm radiator mounts. The BL073 is a single fan, so a 240mm mount needs two and a 360mm mount needs three.

How loud is the be quiet! Light Wings 120mm High Speed?

be quiet! rates it at 31dB(A) at its full 2,500rpm. Because it uses a 4-pin PWM connector, your motherboard can lower the speed and the noise whenever the system is not under load.

Do I need a separate ARGB controller for the lighting?

No. The 18 LEDs are designed to sync with your motherboard's ARGB adjustments, so control runs through the board's addressable header. If your board lacks that header, you would need a third-party controller.

How long is the fan rated to last?

The long-life rifle bearing carries a rated operating lifetime of 60,000 hours. Check the product listing for current warranty terms, which be quiet! sets separately from the bearing rating.

Is this the standard Light Wings or the High Speed version?

This is the High Speed variant, model BL073, running up to 2,500rpm and aimed at radiators and heatsinks where pressure matters.

Key Features

  • ARGB lighting on front and rear
  • Multiple colors and modes for an individual look thanks to 18 LEDs
  • Nine silence-optimized fan blades for high pressure and low noise-generating turbulences
  • Remarkable performance-to-noise ratio with 31dB(A) at 2,500rpm
  • Long life rifle-bearing gives an operating lifetime of 60,000 hours

Full Specifications

Brandbe quiet!
ModelBL073
Voltage12 Volts
Wattage5.4 watts
MaterialCopper
Set NamePWM High-Speed
Unit Count1.0 Count
Noise Level31 Decibels
Part NumberBL073
Material TypeCopper
Cooling MethodFan
Number of Items1
Air Flow Capacity52.3 Cubic Feet Per Minute
Compatible DevicesDesktop
Included ComponentsCooling Fan
Power Connector Type4-Pin
Warranty Description1 year
Maximum Rotational Speed2500 RPM
Item Dimensions L x W x H4.72"L x 4.72"W x 0.98"H
Global Trade Identification Number04260052188774
Full listing titlebe quiet! Light Wings 120mm PWM High Speed Low Noise Premium ARGB Cooling Fan | 4-Pin | Ideal for Radiators and Heat Syncs | Black | BL073

Ready to buy?

Amazon shows no buyable offer for be quiet! Light Wings 120mm PWM High Speed Low… at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Search Amazon for an in-stock match →

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →