Skip to main content
BOJACK Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste 50g
BOJACK

BOJACK Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste 50g

Bottom line: The BOJACK Solder Flux: 50g (1.8oz) tin lasts through many recap and rework sessions; main trade-off: rosin residue may need cleanup with isopropyl alcohol after soldering.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 50g (1.8oz) tin lasts through many recap and rework sessions
  • ✓ Neutral pH 7 ±0.3 rating, listed by BOJACK as non-corrosive
  • ✓ Paste format stays on the pad instead of running across the board
  • ✓ Rated for copper, tin, iron and gold surfaces
  • ✓ Positioned for phone PCB, SMD and SMT patch rework

Cons

  • ✗ Rosin residue may need cleanup with isopropyl alcohol after soldering
  • ✗ Open tin needs a brush or pick to apply; no syringe for precise dosing
  • ✗ No published flux classification (such as RMA or ROL0) in the listing
  • ✗ Listing gives no shelf-life or storage guidance

Manufacturer description

BOJACK Solder Flux is a rosin-based soldering flux paste in a 50g (1.8oz) tin. It suits the small-scale electronics work that retro console and vintage PC repair demands. Spread a thin layer on a pad or lead before you heat it. The flux cleans the surface and blocks oxidation, so solder wets the joint and flows instead of balling up. BOJACK rates the paste at a neutral pH of 7 ±0.3 and lists it as non-corrosive. That matters when you rework decades-old boards whose traces are already fragile. The manufacturer positions it for phone PCB repair, SMD and SMT patch work, and appliance repair. It…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for BOJACK Solder Flux, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "50g (1.8oz) tin lasts through many recap and rework sessions"; the main trade-off is "Rosin residue may need cleanup with isopropyl alcohol after soldering". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I use this flux for recapping a retro console motherboard?

Yes, that is the kind of job it is made for. BOJACK lists it for soldering electronic components on PCBs, including SMD and SMT work, and it is rated for the copper and tin found on console boards. Apply a thin layer to the pad before you remove or install the capacitor.

Is BOJACK solder flux corrosive to circuit boards?

BOJACK rates the paste at a neutral pH of 7 ±0.3 and describes it as no-corrosion. Rosin residue can still attract dust over time, so many repairers wipe the joint with isopropyl alcohol after soldering.

How much flux is in the tin?

The tin holds 50g (1.8oz) of rosin flux paste, and the package contains one tin.

What metals does this flux work on?

According to BOJACK, it works on copper, tin, iron, gold and other metals used in instruments, meters, phone PCBs and appliance repair.

Does this replace solder, or do I still need solder wire?

You still need solder. This is a flux paste. It cleans the surface, prevents oxidation and helps solder flow, but it does not contain the solder alloy that forms the joint.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Product: Soldering Flux Paste
  • Attributes: Neutral PH7 ±0.3; Net Weight 50g/1.8oz
  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding.
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface.
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair.

Full Specifications

Size‎1 Pcs
BrandBOJACK
Weight50g
FeatureNon-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface.
ProductSoldering Flux Paste
FunctionSoldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding.
Material‎gold
AttributesNeutral PH7 ±0.3; Net Weight 50g/1.8oz
Part Number‎BJ-PASTE-1
Package Dimensions‎2.56 x 2.56 x 0.94 inches
Item Package Quantity‎1

Ready to buy?

BOJACK Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste 50g is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →