DELXING
DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader
Bottom line: The DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader ($21.99 on Amazon as of 2026-10-06): Handles 2.5"/3.5" IDE plus 2.5"/3.5" SATA drives up to 6TB; main trade-off: cannot run two IDE drives simultaneously.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Handles 2.5"/3.5" IDE plus 2.5"/3.5" SATA drives up to 6TB
- ✓ Runs one IDE and one SATA drive at the same time
- ✓ USB 3.0 and USB-C connectors both included, no dongle needed
- ✓ 5Gbps USB 3.0 ceiling, backward compatible with USB 2.0/1.1
- ✓ Ships with 12V/2A brick and 4-pin cable for 3.5" drives
Cons
- ✗ Cannot run two IDE drives simultaneously
- ✗ 3.5" IDE and older SATA drives require the external power brick
- ✗ Defaults to 2.5" IDE as master; jumpers may need changing
- ✗ New drives need manual initialization in Disk Management first
SpecPicks Verdict
SpecPicks scored DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. DELXING's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Universal Hard Drive Reader: This SATA USB adapter supports 2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE with capacity of up to 6 TB. Play and plug, no drive required. Compatible with Windows 11/XP/Vista/7/8/10, Mac OS 10. X
- Works with 2 HDDs: This IDE to USB adapter is equipped with a SATA III connector and 2 IDE connectors (one 2.5" and one 3.5"), which can work with 2 HDDs (One IDE and One SATA ) simultaneously, but not work for 2 IED drives at the same time
- High Transfer Speed: This SATA reader is designed with USB 3.0 and Type C port and supports transfer speeds of up to 5Gbps, which not only enables fast file transfer, but also ensures data security. It is also backward compatible with USB 2.0/1.1. NOTE: the actual transfer speed depend on the setting of the connected devices
- 2 In 1 Dual Interface: Adopting USB 3.0 and Type C 2 in 1 dual interface design, our external hard drive reader is suitable for various types of computers or laptops, more convenience and economical, greatly meet your need. Support hot swap. Led indicator light shows power and activity status
- Package included: Hard drive adapter x1, 4 pin power cable x1, 12V 2A power adapter x1, USB + USB C cable, user manual x1. For 3.5" IDE drivers and old SATA HDD, you need to connect this 12V 2A power adapter and 4-pin power cable for a better connection
- Tips: This ultra data recovery converter default master is a 2.5" IDE hard drive, if your hard drive is new, please go to "Disk Management" to initialize it first so that the hard drive can be recognized. For jumper settings, please refer to your hard drive manufacturer's documentation
Full Specifications
| Brand | DELXING |
|---|---|
| Color | Black |
| Unit Count | 1 Count |
| Connectivity | USB-C |
| Model Number | SA19 |
| Compatibility | Mac |
| Built-In Media | 12V/2A power adapter X1, 4 pin power cable X1, Hard drive reader x1, USB C+USB 2-In-1 cable X1, User manual xX1 |
| Mfr Part Number | SA36-ACCC |
| Hardware Platform | Windows |
| Compatible Devices | Laptop |
| Data Transfer Rate | 5 gigabits_per_second |
| Enclosure Material | Plastic |
| Hardware Interface | IDE, SATA 6.0 Gb/s, USB 3.0 Type C |
| Warranty Description | 12 months |
| Hard Disk Form Factor | 2.5 inches |
| Connectivity Technology | USB 3.0, USB-C |
| Memory Storage Capacity | 6 TB |
| Item Dimensions L x W x H | 2.44"L x 0.59"W x 3.74"H |
| Supported Devices Quantity | 2 |
| Full listing title | USB 3.0 to SATA IDE Adapter Hard Drive Reader, USB + Type C to External Hard Drive Disk HDD Converter Kit for Universal 2.5" 3.5" IDE HDD, 2.5" SSD, with 12V/2A Power Adapter |
Ready to buy?
USB 3.0 to SATA IDE Adapter Hard Drive Reader, USB + Type C to External Hard Drive Disk HDD Converter Kit for Universal 2.5" 3.5" IDE HDD, 2.5" SSD, with 12V/2A Power Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Build a Plex Media Server on a Raspberry Pi 4 8GB in 2026
- Best CPU Coolers for AMD Ryzen 5000 (AM4) in 2026
- Self-Host Immich on a Budget Homelab Box: Storage Tiers That Make Sense
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
- Ryzen 7 5800X vs 5700X vs 5600G for a Budget Local-LLM Rig
- Best CPU cooler for the Ryzen 7 5800X in 2026
- RTX 3060 12GB vs RX 6700 XT 12GB for Phi-4 14B Under $300 (2026)
- Best GPU for Gaming in 2026: Our Top 5 Picks Tested
- Home Assistant on a Raspberry Pi 4 8GB: Full 2026 Setup
- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- AMD Radeon RX 9070 GRE Linux Performance 2026
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026? Ollama tok/s + SSD-Boot Setup
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Dual RTX 3090 Setup Guide 2026: PSU, NVLink, Cooling
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- Voodoo 3 3500 TV vs GeForce 256 DDR: The Last Great 1999 Gaming GPU Showdown
- AI-Driven Vintage Driver Install on WinXP: Using Vision-LLM to Walk a Voodoo + Audigy Setup
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090