Alinan
Alinan 6pcs 4010 12V Sleeve Bearing Brushless Cooling Fan 40 * 40 * 10MM
Bottom line: The Alinan 6pcs 4010 12V Sleeve Bearing Brushless Cooling Fan 40 * 40 * is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 【Connector & Cable Length】: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
- ✓ Backed by Alinan's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Feature:Rated Voltage: DC 12VRated Current: 0.1AAir Flow: 7.1±10% CFMPower: 1.2WWind Speed: 6500RPMNoise: 27dBABearing: Oil BearingWiring Length: 2pin, 30cm/11.8inPower Connector: 2pin-XH2.54Bearing Type: Sleeve/Dual Ball BearingFan Size: 40x40x10mmNotice:This 4010 brushless cooling fan is non-waterproof product, it is strictly prohibited using in water.The Blower fan operating voltage is DC 12V, overload use is prohibited.
SpecPicks Verdict
SpecPicks scored Alinan 6pcs 4010 12V Sleeve Bearing Brushless Cooling Fan 40 * 40 *… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Alinan's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Micro size and lightweight design, suitable for 3D printer extruder/hotend/nozzle or any DIY cooling and narrow place.
- High quality Hydraulic Bearings, balance price and performance, suitable for daily use.
- 【Rated Voltage】: DC 12V, Current: 0.1A, Power: 1.2W, Speed: 6500PRM, Air Pressure: 3.92mmH₂O, Airflow: 7.1CFM, Noise: 28.2dBA
- 【Connector & Cable Length】: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
- 【Application】: Suitable for ventilation of Small PC Case/Router/TV box/VR glasses and any small electronic equipment cooling ventilation.
Full Specifications
| Brand | Alinan |
|---|---|
| Model | Alinan |
| Voltage | 12 volts |
| Wattage | 1.2 watts |
| Material | Glass |
| Noise Level | 1 sones |
| Part Number | Alinan |
| Compatibility | PC |
| Material Type | Glass |
| Cooling Method | others |
| Number of Items | 6 |
| Air Flow Capacity | 7.1 cfm |
| Compatible Devices | others |
| Included Components | others |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 1 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | Alinan 6pcs 4010 12V Sleeve Bearing Brushless Cooling Fan 40 * 40 * 10MM with 2PIN Terninal 3D Printer Cooling Fan Computer Fan |
Ready to buy?
Alinan 6pcs 4010 12V Sleeve Bearing Brushless Cooling Fan 40 * 40 * 10MM with 2PIN Terninal 3D Printer Cooling Fan Computer Fan is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Is My CPU Sufficient for Light Universe Simulations?
- Best 4K Monitor for PS5 and Console Gaming Under $400 (2026)
- AI Rigging 3D Models: The 2026 Hardware Guide
- Arc Pro B60 Dual 48GB vs Dual RTX 3060 12GB for 70B Local LLMs (2026)
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Qwen3.6 35B A3B on RTX 3060 12GB: 80 tok/s with llama.cpp MTP
- Best Budget Streaming & Podcast Gear in 2026
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- Best Gaming Mouse Pads for FPS and MOBA in 2026
- Intel's llm-scaler-vLLM 1.4 Adds Arc Pro B70: A Cheaper Local-Inference Path?
- Best Controller for PC Gaming in 2026: Wired vs Wireless Compared
- Best 1440p 240Hz Gaming Monitors in 2026
- Samsung 1440p 240Hz Gaming Monitor Drops to $169 — 32% Off
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- GPT-5.6 Rollout Now Requires US Government Sign-Off, Customer by Customer
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- How to run Llama 3.1 70B on Arc B580
- GLM-5.2 vs Qwen3 on a 12GB GPU: Best Open-Weights LLM for an RTX 3060
- Logitech G29 vs HORI Force Feedback Wheel — Which First Wheel Is Right?
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- Best Quiet CPU Cooler for Silent Workstation and Office Builds 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090