Frgyee
Frgyee Audio Technica AT2020 Mic Stand
Bottom line: The Frgyee Audio Technica AT2020 Mic Stand: Steel boom arm rated for about 1.5kg (53oz) of microphone load; main trade-off: third-party Frgyee accessory, not made or endorsed by Audio-Technica.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Steel boom arm rated for about 1.5kg (53oz) of microphone load
- ✓ 360-degree rotation lets you set the mic at any angle and height
- ✓ Desk clamp fits tops up to 2.4in/60mm thick and has an anti-scratch pad
- ✓ Shock mount helps isolate desk bumps and floor taps from recordings
- ✓ Includes pop filter, foam windscreen, 3/8-to-5/8 adapter and 4 cable ties
Cons
- ✗ Third-party Frgyee accessory, not made or endorsed by Audio-Technica
- ✗ Included foam windscreen fits only the AT2020 body
- ✗ Clamp will not fit desks thicker than 2.4in/60mm
- ✗ No XLR or USB cable included; clamp is the only mounting option
SpecPicks Verdict
SpecPicks scored Frgyee Audio Technica AT2020 Mic Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. Frgyee's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Heavy Duty Boom Arm - The adjustable AT2020 microphone arm stand is made of durable steel for heavy duty carry. Max load: Approx.53oz/1.5kg. It offers 360° full rotation to hold your microphone in any position you like. You can adjust the suitable angle and height to show your perfect voice.
- Upgraded Desk Clamp - Compared with other clamps, this mic stand at2020 metal desk clamp has anti-scratch pad and larger contact area for easily clip to any desk up to 2.4"/60mm thick.
- High Quality Shock Mount - The shock mount can reduce unwanted vibration noises. Like floor tapping, desk bumping. To improve audio recording quality. With a 3/8"-5/8" screw adapter. Perfectly match the most of boom arm and microphone stands.
- Perfect Improve - Audio technica stand with a Foam Windscreen and Pop Filter. It’s an ideal kit for reducing the plosive, noise, wind interference, saliva spraying during your recording or broadcasting to ensure a clear and high quality record.
- All In One - 1x Wind Cover only for Audio-Technica AT2020 microphone, 1x Shockmount, 1x Audio technica mic suspension, 1x Table Mounting Clamp, 1x Pop Filter, 1x 3/8 Female to 5/8 Male Screw Adapter, 4x Cable Ties . Great for your recording, YouTube videos, podcasting, online games or voice/spoken work.
Full Specifications
| Brand | Frgyee |
|---|---|
| Color | Black |
| Weight | 53oz |
| Material | Metal |
| Base Type | Flat with feet |
| Finish Type | Lacquered |
| Model Number | Mic Stand AT MU |
| Material Type | Metal |
| Product Style | Modern |
| Item Dimensions | 5 x 5 x 2 inches |
| Vibration/Rumble | Yes |
| Body Material Type | Metal |
| Included Components | Mic Boom Arm Stand, Microphone Shock Mount, AT2020 Foam Cover, Table Mounting Clamp, Pop Filter, 3/8 Female to 5/8 Male Screw Adapter, Cable Ties |
| Warranty Description | 90 |
| Manufacturer Part Number | Mic Stand AT MU |
| Item dimensions L x W x H | 5 x 5 x 2 inches |
| Mount thread size (inches) | 3/8 5/8 inches |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 1.5 pounds |
| Full listing title | Audio Technica AT2020 Mic Stand, AT2020 Mic Boom Arm Suspension Scissor Stand with Shock Mount, Pop Filter, Upgraded Heavy Duty Clamp for AT2020 AT2020USB+ AT2035 Condenser Studio Mic |
Ready to buy?
Audio Technica AT2020 Mic Stand, AT2020 Mic Boom Arm Suspension Scissor Stand with Shock Mount, Pop Filter, Upgraded Heavy Duty Clamp for AT2020 AT2020USB+ AT2035 Condenser Studio Mic is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Etched's Transformer-Only Inference Chip vs Your GPU: What Changes for Local Builders
- Best Gaming PC Build 2026: 4K Ray Tracing Guide
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Sound Blaster AWE64 vs Aureal Vortex 2: The Win98 Audio API War, Revisited
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- retrorecs.com: A New Retro Game Recommendation Engine
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Open Weights Are Reshaping Agentic Coding: A 2026 Local-Rig Reality Check
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Aider vs Cline vs Continue on a Local Coding Rig (RTX 3060, 2026)
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Noctua NH-U12S vs ML240L RGB on a Ryzen 7 5800X
- Sound Blaster Audigy FX vs Sound BlasterX G6: Picking a Card for Retro and Modern Dual-Boot
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- Logitech G920 vs HORI Racing Wheel: Best Starter Sim Wheel in 2026
- Intel Arc Pro B60 Review 2025: Xe2 Workstation GPU Guide
- Building a 2002 LAN Party PC: GeForce 4 Ti + Athlon XP
- Ideogram 4.0 Open Weights: Native 2K Image Gen on a 12GB GPU
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best Parts for a Local RAG Document-QA Workstation in 2026
- AI Rigging 3D Models: The 2026 Hardware Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090