MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 35FT 50 ohm Ultra Low Loss for Antenna
Bottom line: The RG8X BNC Male to BNC Male Coaxial Cable 35FT 50 ohm Ultra Low Loss: RG8X 50 ohm build rated -2.65 dB loss at 25ft/1800MHz with VSWR under 1.15; main trade-off: 50 ohm only, so it mismatches 75 ohm video and cable-TV gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ RG8X 50 ohm build rated -2.65 dB loss at 25ft/1800MHz with VSWR under 1.15
- ✓ Pure copper center conductor with 95% tinned copper braid shielding
- ✓ 35FT run reaches an attic or roof antenna without an added barrel adapter
- ✓ Waterproof PVC jacket rated for long-term outdoor runs
Cons
- ✗ 50 ohm only, so it mismatches 75 ohm video and cable-TV gear
- ✗ RG8X is thicker and stiffer than RG58, awkward in tight retro cases
- ✗ 35FT is more cable than most bench oscilloscope or analyzer setups need
- ✗ BNC-to-BNC only, so SMA or N-type radios need separate adapters
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for RG8X BNC Male to BNC Male Coaxial Cable 35FT 50 ohm Ultra Low Loss, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "RG8X 50 ohm build rated -2.65 dB loss at 25ft/1800MHz with VSWR under 1.15"; the main trade-off is "50 ohm only, so it mismatches 75 ohm video and cable-TV gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | RG8X-BNC-JJ-35FT |
| Weight | 3g |
| Frequency | 2 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 35 Feet |
| Item Length | 35 feet |
| Part Number | RG8X-BNC-JJ-35FT |
| Connector Type | BNC |
| Number of Pins | 2 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Data Transfer Rate | 5 gigabits_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 30 Days From the Date of Purchased |
| Full listing title | RG8X BNC Male to BNC Male Coaxial Cable 35FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator |
Ready to buy?
RG8X BNC Male to BNC Male Coaxial Cable 35FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Imaging Big-Box CD-ROMs to CompactFlash for a Windows 98 Retro PC
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- Grok 4.5, GPT-5.6, Kimi K3: four frontier models in eight days — what it means for local rigs
- RTX 5070 Ti vs RTX 5090 for Local LLMs: 16GB vs 32GB
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- What Handheld Console Should I Buy in 2026? A Decision Framework
- Best Sim Racing Wheel & Pedal Setup in 2026
- Shared ChatGPT & Claude Chats Are Spreading Malware — Run a Local LLM on a 12GB GPU Instead
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Which Open LLMs Actually Handle Tool-Calling on an RTX 3060?
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- PS3 Emulation Reaches Radeon HD 2000-4000: What It Unlocks
- Best Gaming Controllers for PC in 2026: 5 Picks Tested Across Genres
- Qwen3.6 the Right Way: Run It Through a Pi Coding Agent
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- Gemma 4 31B on a 24GB GPU: RTX 3090 vs RTX 4090 vs RX 7900 XTX Quant Table (2026)
- Best Controller for Raspberry Pi Retro Emulation in 2026
- 9800X3D vs Core Ultra 9 285K — gaming vs productivity
- How to run Llama 3.1 8B on Apple M4 Max
- Apple Intelligence Gets a Second Shot With Google and Nvidia Help
- Iris-mini vs Iris-pro on an RTX 3060 12GB: Which Open-Weight Search Agent Fits 12 GB VRAM
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090