MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 25FT 50 ohm Ultra Low Loss for Antenna
Bottom line: The RG8X BNC Male to BNC Male Coaxial Cable 25FT 50 ohm Ultra Low Loss: 95% tinned copper braid over pure copper inner conductor; main trade-off: 50 ohm only, wrong impedance for 75 ohm video and CCTV BNC gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 95% tinned copper braid over pure copper inner conductor
- ✓ Low -2.65 dB attenuation at 1800 MHz over the 25 ft run
- ✓ VSWR held to 1.15 or lower for clean 50 ohm matching
- ✓ 2.2 in adhesive tube anchors each BNC connector to the jacket
Cons
- ✗ 50 ohm only, wrong impedance for 75 ohm video and CCTV BNC gear
- ✗ RG8X is thicker and stiffer than RG58 in tight benchtop routing
- ✗ 25 ft is the only length described here, no shorter jumper option
- ✗ BNC male on both ends, adapters needed for SMA or PL-259 radios
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for RG8X BNC Male to BNC Male Coaxial Cable 25FT 50 ohm Ultra Low Loss, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "95% tinned copper braid over pure copper inner conductor"; the main trade-off is "50 ohm only, wrong impedance for 75 ohm video and CCTV BNC gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | RG8X-BNC-JJ-25FT |
| Weight | 3g |
| Frequency | 2000 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | RG8X-BNC-JJ-25FT |
| Connector Type | BNC |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Compatible Devices | Devices with BNC connectors |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | Basic Retail Box |
| [Specification]-Connector | BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X. |
| Other Special Features of the Product | gps |
| Full listing title | RG8X BNC Male to BNC Male Coaxial Cable 25FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator |
Ready to buy?
RG8X BNC Male to BNC Male Coaxial Cable 25FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Best GPUs for 1440p Gaming in 2026
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Solar-Powered Raspberry Pi Bird Identifier Shows the Pi AI Camera's Reach
- CompactFlash as a Retro PC Boot Drive: The 2026 CF-to-IDE Build Guide
- Raspberry Pi Air Quality Sensor Guide: Setup & Sensor Picks
- 9800X3D vs Core Ultra 9 285K — gaming vs productivity
- Retro Windows XP: SSD Upgrade via IDE Adapter (2026 Guide)
- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- Ryzen 5 5600G vs Core i7-9700K for a Budget 1080p Gaming Build
- Asus ROG Xreal R1 Brings 240 Hz to AR Glasses — What PC Gamers Should Know
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Logitech G29 vs HORI Racing Wheel Overdrive: Which Entry Sim Wheel Wins?
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Best Controller for RetroPie & Pi Emulation: SN30 Pro vs DualSense
- Best Retro Gaming Console to Buy in 2026
- RTX 3060 12GB Showdown: ZOTAC Twin Edge vs MSI Ventus 2X (2026)
- Raspberry Pi 5 Projects Worth Building in 2026
- Silicon Motion PCIe 6.0: Nvidia AI Drives Consumer Storage
- llama.cpp Vulkan vs CUDA on a 12GB RTX 3060: Which Backend Wins?
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- Linux Beats Windows 11 on AMD's Ryzen 9 9950X3D2
- DGX Spark vs Mac Studio M3 Ultra: Which AI Dev Machine Wins in 2026?
- Best Streaming Gear for New Content Creators in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090