6pc Dual-axis XY Joystick Module PS2 Control Lever Sensor KY-023 Breakout Module with Dupont Cable for Arduino
Bottom line: Per its Amazon listing, the 6pc Dual-axis XY Joystick Module PS2 Control Lever Sensor KY-023: voltage:The module uses DC 3.3V-5V power supply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Output:The DO port is used for digital output, and the AO port is used for analog output
- ✓ Backed by DKARDU's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Product DescriptionTwo-axis key joystick sensor module by the use of PS2 rocker potentiometer, with (X, Y) 2-axis analog output, (Z) 1 button digital output.With the A-rd-ui-no sensor expansion board can produce remote control and other interactive works.In addition, this product in order to allow customers to more easily with the a-rd-ui-no expansion board and other standard interfaces, in the design of the X, Y, Z axis of the circuit are separate leads, the user can use 3-pin a-rd-ui-no special line really plug into the expansion board .Tutorial:In fact, this module is a potentiometer, x…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 6pc Dual-axis XY Joystick Module PS2 Control Lever Sensor KY-023…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Voltage:The module uses DC 3.3V-5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow , the voltage value decreases, and the minimum value is 0V
- Composition:The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control.
- Output:The DO port is used for digital output, and the AO port is used for analog output
- Resistor: Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change.
- Composition:The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control.
Full Specifications
| Brand | DKARDU |
|---|---|
| Color | KY-023 |
| Model | JK-US-497 |
| Material | Copper, Phosphor Bronze |
| Resistor | Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. |
| Terminal | Dupont |
| Unit Count | 6 Count |
| Part Number | JK-US-497 |
| Switch Type | Rocker |
| Circuit Type | 3-way |
| Contact Type | Normally Open |
| Control Type | Full |
| Actuator Type | Rocker |
| Compatibility | Switch |
| Material Type | Copper, Phosphor Bronze |
| Mounting Type | Plug-In Mount |
| Connector Type | Plug In |
| Control Method | Touch |
| Operation Mode | manual |
| Controller Type | Joystick Module |
Ready to buy?
6pc Dual-axis XY Joystick Module PS2 Control Lever Sensor KY-023 Breakout Module with Dupont Cable for Arduino is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLM
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
- ComfyUI on an RTX 3060 12GB: A 2026 Local Stable Diffusion Setup Guide
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- Best Budget SSD for PC Builds in 2026
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- Best Single-Board Computer Project Kits for Beginners (2026)
- Glide on Modern PCs: dgVoodoo2 + nGlide for 3dfx-Era Games (2026)
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- Building a Period-Correct 1999 3dfx Voodoo3 Windows 98 PC in 2026
- Noctua NH-U12S vs Cooler Master ML240L: Which Cools a 5800X?
- Claude Fable 5 Launches at #1 on the Intelligence Index — What Local Builders Should Take Away
- Claude Code Telemetry Flap: Why a Local RTX 3060 Rig Is the Privacy Play
- Best SATA SSD for a PS4 Upgrade in 2026: BX500 vs 870 EVO vs WD Blue
- Leanstral 1.5 on the RTX 3060 12GB: Open Math and Code on a Budget GPU
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Is My CPU Sufficient for Light Universe Simulations?
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Qwen 3.6 35B-A3B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT Quant Table
- How LAN Parties Died: A 2002-2008 Cultural Retrospective
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- A Practical Look at the PlayStation Architecture — and Why It Still Matters
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090