Skip to main content
Cooler Master Vertical GPU Holder Kit V3, for E-ATX/ATX/mATX PC Case & PCI-E 4.0 Devices, Adjustable Modular Video Card Support, Thick SGCC Steel Bracket, 165 mm Riser Cable Included - Black
Cooler Master

Cooler Master Vertical GPU Holder Kit V3

Bottom line: The Cooler Master Vertical GPU Holder Kit V3 ($97.07 on Amazon as of 2026-11-07 23:25 UTC): Ventilated bracket keeps flow-through GPU coolers breathing, unlike solid vertical plates; main trade-off: needs at least 4 free PCI slots, ruling out many compact mATX cases.

$97.07 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $97.07 Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Ventilated bracket keeps flow-through GPU coolers breathing, unlike solid vertical plates
  • ✓ Thick SGCC steel rated for 3.5 kg cards up to 3 slots wide, no sag
  • ✓ Tool-free adjustment: 65 mm toward front panel, 30 mm toward side
  • ✓ 165 mm PCIe 4.0 x16 riser included, backward compatible with PCIe 3.0

Cons

  • ✗ Needs at least 4 free PCI slots, ruling out many compact mATX cases
  • ✗ mATX builds capped at 70 mm CPU cooler height
  • ✗ Cards wider than 3 slots or heavier than 3.5 kg are out of spec
  • ✗ Riser is PCIe 4.0, so PCIe 5.0 GPUs run at reduced link speed

Manufacturer description

The Cooler Master Vertical GPU Holder Kit V3 turns your graphics card sideways so the shroud and RGB face the tempered-glass panel instead of the floor of the case. It is built for E-ATX, ATX, and mATX chassis with at least four free PCI slots, and the ventilated bracket is the part that matters most: it leaves the intake path open for flow-through coolers like the RTX 40- and 50-series Founders Edition designs, which suffocate against a solid vertical plate. Cooler Master uses thick SGCC steel here, claiming a 42 percent durability increase over the previous kit and support for cards up to…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Cooler Master Vertical GPU Holder Kit V3 using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Cooler Master's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this fit my case?

It fits standard E-ATX, ATX, and mATX cases that have at least 4 available PCI slots. On Micro-ATX builds your CPU cooler must be 70 mm tall or less. Count your rear slot openings before ordering.

Does it work with flow-through GPU coolers?

Yes, that is the main change in V3. The bracket is ventilated so air can pass through cards with flow-through cooler designs, rather than being blocked by the side panel and a solid mount.

Is a riser cable included, or do I buy it separately?

Included. You get a 165 mm PCIe 4.0 x16 riser with a 90-degree male-to-female connector. It is backward compatible, so it works on PCIe 3.0 motherboards as well.

How big a graphics card can it hold?

Cooler Master rates it for cards up to 3 slots wide weighing up to 3.5 kg. The thick SGCC steel is specified as 42 percent more durable than the prior kit to prevent sagging or deformation.

How hard is the installation?

The design is modular with a removable GPU panel, and repositioning is tool-free: up to 65 mm toward the front panel and 30 mm toward the side to clear tall RAM or motherboard heatsinks. Check the product listing for current warranty terms.

Key Features

  • GRAPHICS COOLING - The vertical mount of the graphics card holder showcases the GPU/GFX, enhancing the chassis build; The ventilated bracket kit ensures unlimited airflow for "flow-through" GPU coolers
  • PC CASE COMPATIBILITY - Fits all standard E-ATX, ATX & mATX cases (max 70 mm CPU cooler in height available for Micro-ATX) with at least 4 available PCI slots for mounting & supports various sizes of graphic cards (of any length up to 3 slots wide)
  • EASY INSTALLATION - The modular design & removable GPU panel simplify installation, allowing tool-free adjustments up to 65 mm towards the front panel & 30 mm towards the side, improving RAM & motherboard layout
  • DURABLE & RELIABLE - Enhanced with premium, thick SGCC steel to increase durability in the kit by 42%, preventing sagging or deformation of large GPUs weighing up to 3.5 kg
  • RISER CABLE INCLUDED - The included PCIe 4.0 x 16 (165 mm Male to Female 90 Degree Angle) riser cable offers backwards compatibility, durability & fast efficient data transmission for seamless hardware connectivity
  • Product Dimensions ‏ : ‎ 9.45 x 27.17 x 0.98 inches; 1.79 Pounds

Full Specifications

BrandCooler Master
ColorGrey / Black / Purple
Weight3.5 kg
MaterialAlloy Steel
Set NameCooler Master Vertical GPU Holder Kit V3
Dimensions9.45 x 27.17 x 0.98 inch
Item Depth0.98 inches
Unit Count1.0 Count
Finish TypesPowder Coated
Model NumberMCA-U000R-KFVK03
CompatibilityPC
Material TypeAlloy Steel
Mounting TypePC Case Mount
Item Type NameVertical Graphics Card Holder
Item Dimensions12.01 x 7.01 x 5.58 inches
Product Dimensions ‏‎ 9.45 x 27.17 x 0.98 inches; 1.79 Pounds
Manufacturer Part NumberMCA-U000R-KFVK03
Item dimensions L x W x H12.01 x 7.01 x 5.58 inches
Global Trade Identification Number04719512127100
Full listing titleCooler Master Vertical GPU Holder Kit V3, for E-ATX/ATX/mATX PC Case & PCI-E 4.0 Devices, Adjustable Modular Video Card Support, Thick SGCC Steel Bracket, 165 mm Riser Cable Included - Black

Hardware benchmark data

Ready to buy?

Cooler Master Vertical GPU Holder Kit V3, for E-ATX/ATX/mATX PC Case & PCI-E 4.0 Devices, Adjustable Modular Video Card Support, Thick SGCC Steel Bracket, 165 mm Riser Cable Included - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $97.07

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Related Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Cooler Master Vertical GPU Holder Kit V3, for E-ATX/ATX/mATX PC Case & PCI-E 4.0 Devices, Adjustable Modular Video Card Support, Thick SGCC Steel Bracket, 165 mm Riser Cable Included - Black
$97.07
View on Amazon →