UMLIFE Micro SD SDHC TF Card Adapter Reader Module Welded Pins
Bottom line: Per its Amazon listing, the UMLIFE Micro SD SDHC TF Card Adapter Reader Module Welded Pins: micro SD card to signal the direction of converts 3.3V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Applicable card type: Micro SD Card, Micro SDHC Card
- ✓ Backed by UMLIFE's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Specifications:Voltage: 4.5V~5.5V DCCurrent: 0.2~200mACommunication Interface: Standard SPIInterface Voltage Level: 3.3V or 5VApplicable card type: Micro SD Card(less than 2G), Micro SDHC Card(less than 32G)Control Interface: (GND, 3V3, MISO, MOSI, CLK, CS), GND to ground, 3V3 is the power supply, MISO, MOSI, CLK for SPI bus, CS is the chip select signal pinMicro SD card connector: Self bomb deck, easy card insertionPackage includes:10 x Micro SD Card Adapter
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for UMLIFE Micro SD SDHC TF Card Adapter Reader Module Welded Pins, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The module (Micro SD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. for Arduino users can directly use the for Arduino IDE comes with an SD Card to complete the library card initialization and read-write.
- The module built-in level regulator circuit, level conversion circuit board that can interface level is 5V or 3.3V.
- Voltage: 4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V;
- Applicable card type: Micro SD Card, Micro SDHC Card
- Micro SD card to signal the direction of converts 3.3V, Micro SD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.;
- The communication interface is a standard SPI interface, easy to connect to any device with SPI interface;
Full Specifications
| Brand | UMLIFE |
|---|---|
| Color | Welding |
| Voltage | 4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V; |
| Model Number | ee153b34-9254-493a-8510-670ad1f0aa58 |
| Input Voltage | 5 volts_of_direct_current |
| Built-In Media | others |
| Connector Type | SPI |
| Number of Ports | 10 |
| Power Plug Type | No Plug |
| Compatible Devices | Personal Computer, Single-Board Computers |
| Applicable card type | Micro SD Card, Micro SDHC Card |
| Warranty Description | 1 |
| Full listing title | Micro SD SDHC TF Card Adapter Reader Module Welded Pins with SPI Interface Level Conversion Chip Compatible with Arduino Raspberry PI 10pcs |
Ready to buy?
Micro SD SDHC TF Card Adapter Reader Module Welded Pins with SPI Interface Level Conversion Chip Compatible with Arduino Raspberry PI 10pcs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- GitHub Copilot vs Claude Code vs OpenCode Benchmark 2026
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- How to run Qwen 3 14B on NVIDIA GeForce RTX 4090
- OpenAI Codex 'Watch Once, Repeat Forever': What It Means for Local Coding Rigs
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Best Game Controllers for PC in 2026
- Best Gaming Monitor for 1440p Under $400 (2026)
- GPT-5.6 Sol matches Fable 5 near one-third the cost
- Best GPU for 1080p Esports in 2026: High-Refresh Without Overspending
- Best Gaming Mouse for Office Productivity Crossover (2026)
- Microsoft + NVIDIA's 'Agent PC': What Local Hardware Does an On-Device AI Agent Actually Need in 2026?
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
- Can You Build an $800 Gaming PC in 2026? Parts + Cost
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- ChatGPT Full-Duplex Voice: What Real-Time Speech Needs on Your Desk
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- Forza Horizon 6 on the Steam Deck: Settings, Frame Pacing, and the SSD Question
- Raspberry Pi 4 8GB Homelab in 2026: Jellyfin, Pi-hole and Home Assistant on One Board
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090