SABRENT USB-C M.2 NVMe + 2.5/3.5in SATA SSD/HDD Adapter (DS-UCMH) | USB 3.2 Type-C; connects M.2 PCIe NVMe and 2.5"/3.5" SATA drives to USB
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-08-05. Price and availability subject to change.
Bottom line: The SABRENT USB-C M.2 NVMe + 2.5/3.5in SATA SSD/HDD Adapter (DS-UCMH) | USB 3.2 Type-C; connects M.2 PCIe NVMe and 2.5"/3.5" SATA drives to USB is a specs-and-price decision rather than a crowd-consensus one in the drives & media category, priced around $69.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
Pros & Cons
Pros
- ✓ Backed by SABRENT's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
SpecPicks Verdict
SpecPicks scored SABRENT USB-C M.2 NVMe + 2.5/3.5in SATA SSD/HDD Adapter (DS-UCMH) |… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the drives & media category. SABRENT's drives & media lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for drives & media of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Key Features
- The DS-UCMH supports M.2 PCIe NVMe SSDs as well as 2.5”/3.5” SATA SSDs and HDDs, including simultaneously. It connects to the host device via USB but can also operate offline. Ideal for new drive installations, upgrades, data backup, and more.
- The USB 3.2 Gen 2x1 interface connects at up to 10 Gbps to provide up to 1 GB/s of bandwidth for transfers. This enables fast and efficient transfers or cloning for most drives. The installation procedure is also tool-less for added convenience.
- The DS-UCMH has an offline clone function for cloning between drives without host interaction. It also has a clone direction switch plus LED indicators to report drive status and cloning progress. Clone in either direction and keep apprised during the entire process, online or off.
- Includes two USB cables, Type-C to Type-A and to Type-C, for host device flexibility. A 2A/12V power adapter is included to ensure drive stability for maximum reliability. Also included is a silica thermal pad to regulate a M.2 drive’s temperature to prevent performance throttling.
- The USB connection is backward compatible with USB 3.0/2.0 at their respective speed limits. This product is designed for Microsoft Windows and macOS. Please register your product at sabrent.com and contact our technical support team for any assistance.
Full Specifications
| Brand | SABRENT |
|---|---|
| Color | black |
| Material | Plastic |
| Connectivity | USB-C |
| Model Number | DS-UCMH |
| Compatibility | Switch, Mac |
| Built-In Media | USB 3.2 Type C |
| Item Type Name | Hard Drive Converter |
| Mfr Part Number | DS-UCMH |
| Number of Items | 1 |
| Hardware Platform | PC |
| Compatible Devices | 2.5/3.5 Inch SSD & HDD, Desktop, Laptop, NVMe M.2 SSDs |
| Data Transfer Rate | 1000 megabytes_per_second |
| Enclosure Material | Plastic |
| Hardware Interface | SATA 3.0 Gb/s, USB 3.2 Gen 2, USB Type C |
| Warranty Description | 1 year limited. 2 years with manufacturer registration |
| Hard Disk Form Factor | 2.5 inches |
| Connectivity Technology | USB |
| Supported Devices Quantity | 1 |
| Global Trade Identification Number | 00840025256736 |
Ready to buy?
SABRENT USB-C M.2 NVMe + 2.5/3.5in SATA SSD/HDD Adapter (DS-UCMH) | USB 3.2 Type-C; connects M.2 PCIe NVMe and 2.5"/3.5" SATA drives to USB is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-08-05. Price and availability subject to change.
Related Drives & Media
SABRENT USB-C M.2 NVMe + 2.5/3.5in SATA SSD/HDD… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Linux Driver Will Expose Voltage Inputs for Raspberry Pi SBCs
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Steam Deck OLED vs ROG Xbox Ally: 2026 Comparison
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Best Controller for Forza Horizon 6 on PC (2026)
- 1999 Dream Build Reborn: Voodoo3, Pentium III, CF Storage
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- xAI Open-Sources Grok-Build: Running Agentic Coding on Your Own GPU
- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
- Best Gaming Controller for PC and Console in 2026: 5 Picks Compared
- Qwen 3.6 27B vs Sonnet 4.6: Local Agentic Benchmarks
- LM Studio vs Ollama on an RTX 3060 12GB: Which Local Runtime in 2026?
- Best Budget Streaming Mic + Capture Setup: Blue Yeti vs HyperX QuadCast 2 S
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Best GPU for Ryzen 7 9800X3D in 2026: Pairing Guide
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- RTX 5090 vs RTX 5080: Which Should You Buy in 2026?
- Self-Host Immich Photo Backup on a Raspberry Pi 4 8GB in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for Budget 1080p Gaming
- Best GPU for i7-13700K at 1440p 180Hz (GTX 1080 Upgrade)
- GPT-5.6 Deleted User Files With Full Disk Access, OpenAI Says It Shouldn't Have
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090