JOYJOM PTM7950 40x80x0.25mm Phase Change GPU Thermal Pad
Bottom line: The JOYJOM PTM7950 40x80x0.25mm Phase Change GPU Thermal Pad ($14.39 on Amazon as of 2026-10-06): Phase change at 45°C fills die-to-heatsink gaps like paste, without the mess; main trade-off: only 0.25mm thick, so it can't replace thick VRAM or memory pads.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Phase change at 45°C fills die-to-heatsink gaps like paste, without the mess
- ✓ Rated 8.5 W/mK with thermal impedance under 0.04°C·cm²/W (no shim)
- ✓ Listed 1,000-hour 150°C bake and 1,000-cycle test resists pump-out
- ✓ 40x80mm sheet can be cut to cover a CPU and GPU die in one laptop
- ✓ Includes screwdriver, spatula, brush, wipe and gloves for a full repaste
Cons
- ✗ Only 0.25mm thick, so it can't replace thick VRAM or memory pads
- ✗ Needs a first warm-up past 45°C before it reaches full contact
- ✗ Cutting to size and peeling the protective films takes patience
- ✗ Listing calls it silicone grease and paste, which is confusing for a pad
Manufacturer description
The JOYJOM PTM7950 phase change thermal pad is for builders and repairers who want a thermal interface that holds up longer than conventional paste. The 40x80x0.25mm sheet stays solid at room temperature. It softens at 45°C and flows into the microscopic gaps between the die and the heatsink. The listing rates its thermal conductivity at 8.5 W/mK and its thermal impedance below 0.04°C·cm²/W with no shim. The listing cites reliability testing of 1,000 hours of baking at 150°C and 1,000 thermal cycles. That's why PTM7950 is popular for repasting handhelds and consoles, where a pump-out-prone…
SpecPicks Verdict
SpecPicks scored JOYJOM PTM7950 40x80x0.25mm Phase Change GPU Thermal Pad using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. JOYJOM's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Is the JOYJOM PTM7950 a thermal paste or a thermal pad?
It is a 40x80x0.25mm phase change pad. It ships as a solid sheet, softens at 45°C and then flows like paste to fill surface gaps. The listing title mentions thermal paste, but the product is the pad sheet.
Will the PTM7950 work in a Steam Deck or PS5?
The listing names the PS5 and Steam Deck as target devices, along with laptop CPUs and GPUs and M.2 SSDs. At 0.25mm thick, it is meant to go directly between the die and the heatsink, not in spots that need thick pads.
How long does PTM7950 last compared to regular thermal paste?
The listing cites a 1,000-hour bake test at 150°C and 1,000 thermal cycles with stable performance. Phase change material is chosen mainly because it resists the pump-out that dries out conventional paste over time.
Do I need to do anything special after installing it?
The pad reaches full contact once the chip heats past its 45°C phase change point. Running a normal gaming or stress load for a short session lets the material soften and settle into the gap.
What comes in the box with the JOYJOM PTM7950?
You get one 40x80x0.25mm thermal pad, a Phillips screwdriver, a spatula, a cleaning wipe, a cleaning brush and finger gloves.
Key Features
- PTM7950 is a highly thermally conductive Phase Change Material (PCM) that lasts longer and is more effective than tradiational thermal paste.
- Size 40x80x0.25mm, Phase change at 45°C, Thermal Conductivity: 8.5 W/m.K,
- PTM7950 is a proprietary material that provides superior reliability (pass 150˚C baking 1000 hours, T/C-B 1000 cycles) and maintains low thermal impedance (<0.04˚Ccm2/W @ no shim), making the PTM7950 series desirable for high performance integrated circuit devices.
- PTM7950, based on a novel polymer PCM system, exhibits excellent interface wetability during typical operating temperature ranges, resulting in extremely low surface contact resistance.
- Package include: 1x Thermal Pad 40x80x0.25mm, 1x Phillips Screwdriver, 1x Cleaning Wipe, 1x Spatula, Finger gloves, 1x Cleaning Brush
Full Specifications
| Brand | JOYJOM |
|---|---|
| Dimensions | 40x80x0.25mm |
| Compatibility | PS5 |
| Package include | 1x Thermal Pad 40x80x0.25mm, 1x Phillips Screwdriver, 1x Cleaning Wipe, 1x Spatula, Finger gloves, 1x Cleaning Brush |
| Package Dimensions | 6.02 x 4.13 x 1.14 inches |
| Full listing title | PTM7950 40x80x0.25mm Phase Change GPU Thermal Pad, JOYJOM High Conductive Silicone Grease 8.5W/mK CPU Thermal Paste for PS5 Steam Deck CPU GPU SSD M.2 Laptop |
Ready to buy?
PTM7950 40x80x0.25mm Phase Change GPU Thermal Pad, JOYJOM High Conductive Silicone Grease 8.5W/mK CPU Thermal Paste for PS5 Steam Deck CPU GPU SSD M.2 Laptop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- Anthropic: AI Builds Working Exploits in Hours, Not Weeks
- RTX 3060 12GB vs RX 6700 XT 12GB for Phi-4 14B Under $300 (2026)
- Sound Blaster AWE32 vs AWE64: Which Belongs in Your DOS Build?
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- Qwen 3.8 Open Weights on a 12 GB RTX 3060: What Actually Fits
- Best Streaming & Content-Creation Starter Kit in 2026
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- PS3 Emulation Reaches Radeon HD 2000-4000: What It Unlocks
- Adding a Sound BlasterX G6 to a Windows 98/XP Retro Gaming PC
- Best 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI vs Samsung
- Asus Prime Z890-P WiFi Review: Built for Core Ultra 200S
- 4K@60fps USB Video Capture on Linux: What Works in 2026
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- Intel Core Ultra 5 250K Plus Takes On the Ryzen 5 7600X3D for Mid-Range Gaming
- Athlon XP + Radeon 9800 Pro AGP Build Guide: 2003 Period-Correct Rig
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Self-Hosted Home Assistant on a Raspberry Pi 4 8GB (2026 Build)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090