Skip to main content
Power Supply for Atari 2600, AC Power Cord Adapter Compatible with Atari 2600 System Console 9V/850mA US Plug
CSTESVN

Power Supply for Atari 2600, AC Power Cord Adapter Compatible with Atari 2600 System Console 9V/850mA US Plug

Bottom line: The CSTESVN Power Supply for Atari 2600: 9V DC / 850mA output matched to the US-version Atari 2600 console; main trade-off: US-version Atari 2600 only; not for Atari 7800, 5200 or 800XE.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 9V DC / 850mA output matched to the US-version Atari 2600 console
  • ✓ Wide 110-245V AC input range for standard US wall outlets
  • ✓ 1.5M (4.9ft) cord reaches from outlet to console on most TV stands
  • ✓ Built-in short-circuit, over-current and overload protection IC
  • ✓ Backed by an 18-month seller quality assurance

Cons

  • ✗ US-version Atari 2600 only; not for Atari 7800, 5200 or 800XE
  • ✗ US plug only; overseas outlets need a separate plug adapter
  • ✗ 4.9ft cord may fall short for couch-distance or wall-mounted TV setups
  • ✗ Third-party CSTESVN replacement, not an original Atari-branded supply

Manufacturer description

Product Features:Power adapter for Atari 2600 (US Version Only) consoles to provide continuous power life.Overcharge protection, overvoltage protection, overcurrent protection, and short circuit protection, so it can provide a reliable and enjoyable low-noise gaming experience.Product Specifications:Color: BlackMaterial: Metal+PlasticInput: AC 110-245V 60HZOutput: DC 9V/850mAPlug Type: US PlugCable Length: 1.5M/4.9FTPackage Contents:1 x Power Supply for Atari 2600Promise:We offer 18-month quality assurance for all products, providing lifelong technical support, with no worry about using…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for CSTESVN Power Supply for Atari 2600, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "9V DC / 850mA output matched to the US-version Atari 2600 console"; the main trade-off is "US-version Atari 2600 only; not for Atari 7800, 5200 or 800XE". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Product Specifications】: Power Cord for Atari 2600 only. Input:AC 110-245V 60HZ; Output: DC 9V/850mA; Cable Length: 1.5M/4.9FT; Plug: US Plug; Material: Metal+Plastic.
  • 【Product Compatibility】: Replacement AC power adapter compatible with Atari 2600 (US Version Only) game console. Not for Atari 7800, 5200, 800XE consoles.
  • 【Smart Charging】: The power supply for Atari 2600 replaces your defective or missing ac adapter. The intelligent IC chip has short circuit protection, over-current protection, overload protection, etc.
  • 【Plug and Play】: Plug in the ac adapter from any 110-245 volt outlet to power for Atari 2600, 5ft power supply cord. Lightweight and fit into your handbag or backpack.
  • 【What You Get】: 1 x Power Supply for Atari 2600. The cable is made of high-quality copper and a shield to protect against frayed cables and broken connections. We offer 18-month quality assurance for all products, providing lifelong technical support.

Full Specifications

BrandCSTESVN
ColorBlack
CurrentDC
Wattage45 watts
Amperage850 Milliamps
PortableYes
Plug TypeUS Plug
Power PlugType A - 2 pin (North American)
Unit Count1.0 Count
Form FactorPower Adapter with Cable and Plug
Power SourceCorded Electric
Input Voltage240 Volts
Mounting TypeWall Mount
Built-In Media1 x AC Adapter
Connector TypeBarrel Connector
Output Current850 Amps
Output Voltage9 Volts
Frequency Range60 Hz
Number of Items1
Special FeatureLightweight Design

Ready to buy?

Power Supply for Atari 2600, AC Power Cord Adapter Compatible with Atari 2600 System Console 9V/850mA US Plug is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →