Sn42/Bi58 Lead Free Solder Paste (30g) & No Clean Soldering Flux (10cc) & Soler Wick
Bottom line: The Sn42/Bi58 Lead Free Solder Paste ($16.99 on Amazon as of 2026-11-20 17:20 UTC): Sn42/Bi58 paste melts at 138C (280.4F), gentle on heat-sensitive boards; main trade-off: bismuth-tin joints are more brittle than standard lead-free alloys.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Sn42/Bi58 paste melts at 138C (280.4F), gentle on heat-sensitive boards
- ✓ Bundles 30g paste, 10cc flux and desoldering wick in one kit
- ✓ Halogen-free, non-corrosive flux suited to delicate rework
- ✓ No-clean wick leaves minimal residue after desoldering
- ✓ Works on paper and flexible boards that can't take high heat
Cons
- ✗ Bismuth-tin joints are more brittle than standard lead-free alloys
- ✗ Low melt point unsuited to parts that run near 138C
- ✗ 30g of paste is sized for repairs, not production runs
- ✗ Wick width and length not specified in the listing
Manufacturer description
The Essmetuin solder paste kit gives you three rework tools in one box: 30g of Sn42/Bi58 lead-free solder paste, a 10cc syringe of no-clean soldering flux, and a no-clean desoldering wick. It covers the whole job of removing and replacing SMD/SMT components on a damaged circuit board. The main reason to buy it is the low melting point. Sn42/Bi58 paste melts at 138C (280.4F), well below standard lead-free alloys. That makes it a good fit for paper boards, flexible boards and other assemblies that can't take high reflow temperatures. It also suits small parts that need careful, targeted work…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Sn42/Bi58 Lead Free Solder Paste (30g) & No Clean Soldering…, so this read rests on the manufacturer's listed specs and the current price in the tools & maintenance category (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Sn42/Bi58 paste melts at 138C (280.4F), gentle on heat-sensitive boards"; the main trade-off is "Bismuth-tin joints are more brittle than standard lead-free alloys". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What is the melting point of this solder paste?
The Sn42/Bi58 solder paste melts at 138C (280.4F), lower than common lead-free alloys. You can reflow it with less heat, which helps protect sensitive boards and components.
What comes in the Essmetuin kit?
You get 30g of Sn42/Bi58 lead-free solder paste, a 10cc tube of no-clean soldering flux, and a no-clean desoldering wick for removing old solder.
Is this kit safe to use on flexible or paper-based circuit boards?
Yes. Essmetuin says the low-temperature Sn42/Bi58 paste is meant for paper boards and soft boards that can't take high temperatures, and for special soldering of small components.
Do I need to clean the board after using the flux and wick?
Both the flux and the wick are no-clean. The flux is halogen-free and non-corrosive, and the wick leaves only a small amount of residue, so cleanup is minimal for most repairs.
Does this kit contain lead?
No. The solder paste is a lead-free tin-bismuth (Sn42/Bi58) alloy, and the flux is also listed as lead-free and halogen-free.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Soldering Flux: Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability
- Sn42/Bi58 Solder Paste: Melting Point: 138 ℃ (280.4F),Suitable For Paper Boards Or Soft Boards That Cannot Withstand High Temperatures, Special Welding Of Small Components.
- Desolder Wick: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- Removal SMD/SMT, Replace Components Kit
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
Full Specifications
| Size | 20G |
|---|---|
| Brand | Essmetuin |
| Weight | 30g |
| Material | bismuth, copper, soldering flux, tin |
| Part Number | XG-Sn42Bi57.6Ag0.4 |
| Power Source | fuel_powered |
| Desolder Wick | No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning |
| Soldering Flux | Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability |
| Included Components | Solder paste, desoldering wick, soldering flux |
| Item Package Quantity | 1 |
| Sn42/Bi58 Solder Paste | Melting Point: 138 ℃ (280.4F),Suitable For Paper Boards Or Soft Boards That Cannot Withstand High Temperatures, Special Welding Of Small Components. |
| Full listing title | Sn42/Bi58 Lead Free Solder Paste (30g) & No Clean Soldering Flux(10cc) & Soler Wick for Electronic Soldering, SMD/SMT Remove |
Ready to buy?
Sn42/Bi58 Lead Free Solder Paste (30g) & No Clean Soldering Flux(10cc) & Soler Wick for Electronic Soldering, SMD/SMT Remove is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi OS Gets a Desktop Refresh: What Changes for Pi 4 Users
- PS3 Emulation Reaches Radeon HD 2000-4000: What It Unlocks
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Gaming CPU in 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- Best Raspberry Pi for a Retro Console Build in 2026: Pi 4 8GB vs Pi Zero 2 W
- News: ChatGPT Now Listens and Talks at Once
- Logitech G920 vs HORI Racing Wheel: Best First Sim Wheel?
- Best GPU for Local LLMs Under $400 in 2026
- Best USB Microphone and Streaming Kit for Creators in 2026
- llama.cpp on a 12GB RTX 3060: llama-bench Setup and Measured tok/s
- FIDECO vs Unitek vs Vantec: Best IDE-to-USB Adapter for Dumping Retro Drives
- Build a Privacy-First Ring Alternative on a Raspberry Pi 4 in 2026
- MTP Decoding on RTX 3060 12GB: When Multi-Token Prediction Helps (and Hurts)
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- CRT Monitor for Retro Gaming: What Actually Matters in 2025
- Raspberry Pi 4 8GB Local LLM Throughput in 2026
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- China Mobile JT-4.1 Flash 236B: A Token-Efficient MoE and What It Takes to Self-Host
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
- Best CPU Cooler for High-TDP Builds (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090