MOOKEERF BNC Cable 50ft
Bottom line: The MOOKEERF BNC Cable 50ft ($38.99 on Amazon as of 2026-11-21 17:29 UTC): Solid copper inner conductor, not copper-clad aluminum; main trade-off: 50 ft fixed length wastes slack on short bench setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Solid copper inner conductor, not copper-clad aluminum
- ✓ Under 3.66 dB loss at 900 MHz across the full 50 ft run
- ✓ 95% shield coverage against EMI and RFI interference
- ✓ SWR under 1.15 for clean transfer on ham and RF gear
- ✓ 2.2 in heat shrink at each BNC connector resists pull-off
Cons
- ✗ 50 ft fixed length wastes slack on short bench setups
- ✗ KMR240 is an LMR240 equivalent, not genuine Times Microwave
- ✗ 50 ohm only, so wrong for 75 ohm video and CCTV runs
- ✗ Loss spec given only at 900 MHz, not across other bands
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF BNC Cable 50ft, so this read rests on the manufacturer's listed specs and the current price in the retro crt & display accessories category (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Solid copper inner conductor, not copper-clad aluminum"; the main trade-off is "50 ft fixed length wastes slack on short bench setups". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ⭐Applications -- This bnc coax cable is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- ⭐Low Loss & Low SWR -- The signal loss of this (lmr240 equivalent) kmr240 50 ohm bnc cable 50ft is less than 3.66db on 900MHz.Swr is less than 1.15.It could support better signal transfer with minimum signal loss over large distances and higher frequency use.
- ⭐Well Built Construction -- The inner conductor of this bnc male to bnc male cable is made of solid copper but not copper clad aluminium,and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.More than 95% shield performance,95% resistance to EMI and RFI.Weatherproof and flexible black PVC jacket allows the cable exposure in outdoor harsh environments.
- ⭐Stronger Connection -- High quality connectors will not pull off,break and lose signal.The length of heat shrink tube that connect the (lmr240 equivalent) kmr240 coaxial cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- ⭐Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | KMR240 |
| Frequency | 900 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | KMR240 |
| Unit Count | 1.0 Count |
| Part Number | KMR240 |
| Connector Type | Coaxial |
| Number of Pins | 1 |
| Outer Material | Aluminum and copper |
| Number of Items | 1 |
| Special Feature | Weatherproof |
| Connector Gender | Male-to-Male |
| Specification Met | IEEE, RoHS, UL |
| Compatible Devices | Modem |
| Indoor Outdoor Usage | Outdoor |
| Customer Package Type | Coiled in protective tubing or sealed anti-static bag |
| Recommended Uses For Product | Surveillance |
| Full listing title | MOOKEERF BNC Cable 50ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator |
Ready to buy?
MOOKEERF BNC Cable 50ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Best CPU Cooler for a Ryzen 7 5800X (AM4) in 2026
- Best 4K Gaming Monitors Under $500 in 2026
- Prime Day 2026: Gaming Monitor Deals Worth a Look
- Playnix RX 9060 XT 16GB: A Steam Machine Rival at €1,140
- DeepSeek V4 Pro Local Inference: Hardware Requirements and Cost-Per-Million-Tokens vs API
- CompactFlash as a Boot Drive: Silent Storage for a Period-Correct Retro PC (2026)
- Best Controller for PC Emulation in 2026: Pro 2 vs DualSense
- Qwen3 32B on Apple M4 Max vs M4 Pro: tok/s and Memory per Quant (2026)
- Aider vs Cline vs Cursor for AI-Assisted Coding in 2026
- Best Budget SSDs for Retro and Homelab Builds in 2026
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- Iris-mini vs Iris-pro on an RTX 3060 12GB: Which Open-Weight Search Agent Fits 12 GB VRAM
- Raspberry Pi 4 8GB Local LLM Throughput in 2026
- GLM-5.2's Long-Horizon Agent Mode: Running It Locally in 2026
- Qwen3.8 Max vs Claude Opus 4.8: What the Cost-Per-Task Gap Means for Local Rigs
- What Hardware Runs a Gemini-Class Model Locally in 2026?
- Qwen3.6-27B vs Coder-Next: Which Local Coding Model Wins?
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- oQ vs Q4_K/Q6_K vs MXFP4 vs UD-MLX: Which Quantization Format Should You Pick in 2026?
- Stream Deck MK.2 vs 12-Button MMO Mouse vs Macro Keys: Which Shortcut Buttons Are Worth It
- Why Preassembled PCs Beat DIY Builds in 2026
- Best Budget SSD for a Gaming PC in 2026: Crucial BX500 vs SanDisk vs Samsung 970 EVO Plus
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090