MOOKEERF BNC Cable 75ft
Bottom line: The MOOKEERF BNC Cable 75ft: Solid copper inner conductor, not copper-clad aluminum, for lower resistive loss; main trade-off: 50 ohm impedance, so it will mismatch 75 ohm video and CCTV gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Solid copper inner conductor, not copper-clad aluminum, for lower resistive loss
- ✓ Under 5.49 dB loss at 900 MHz across the full 75 ft run
- ✓ SWR below 1.15 keeps reflected power low on RF radio setups
- ✓ 95%+ shielding from aluminum foil plus tinned copper braid blocks EMI and RFI
- ✓ 2.2-inch heat-shrink at each BNC end resists connector pull-off
Cons
- ✗ 50 ohm impedance, so it will mismatch 75 ohm video and CCTV gear
- ✗ 75 ft is overkill for bench work with an oscilloscope or signal generator
- ✗ At 49.99 dollars it costs more than copper-clad-aluminum BNC runs
- ✗ KMR240-grade cable is stiffer than RG58, so tight bends are awkward
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF BNC Cable 75ft, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Solid copper inner conductor, not copper-clad aluminum, for lower resistive loss"; the main trade-off is "50 ohm impedance, so it will mismatch 75 ohm video and CCTV gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ⭐Applications -- This bnc coax cable is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- ⭐Low Loss & Low SWR -- The signal loss of this (lmr240 equivalent) kmr240 50 ohm bnc cable 75ft is less than 5.49db on 900MHz.Swr is less than 1.15.It could support better signal transfer with minimum signal loss over large distances and higher frequency use.
- ⭐Well Built Construction -- The inner conductor of this bnc male to bnc male cable is made of solid copper but not copper clad aluminium,and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.More than 95% shield performance,95% resistance to EMI and RFI.Weatherproof and flexible black PVC jacket allows the cable exposure in outdoor harsh environments.
- ⭐Stronger Connection -- High quality connectors will not pull off,break and lose signal.The length of heat shrink tube that connect the (lmr240 equivalent) kmr240 coaxial cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- ⭐Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | KMR240 |
| Frequency | 900 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | KMR240 |
| Unit Count | 1.0 Count |
| Item Length | 75 Feet |
| Part Number | KMR240 |
| Connector Type | Coaxial |
| Number of Pins | 2 |
| Outer Material | Aluminum foil and tinned copper braid |
| Number of Items | 1 |
| Special Feature | Weatherproof, EMI/RFI Resistant, Durable Shielding |
| Connector Gender | Male-to-Male |
| Specification Met | RoHS |
| Compatible Devices | Modem |
| Indoor Outdoor Usage | Outdoor |
| Customer Package Type | Flexible, protective tubing or bag |
| Full listing title | MOOKEERF BNC Cable 75ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, Signal Generator, etc |
Ready to buy?
MOOKEERF BNC Cable 75ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, Signal Generator, etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- Direct3D vs OpenGL vs Glide: The API War That Shaped PC Gaming
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- Best Internal SSDs for PC Gaming Builds (2026)
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Qwen3 8B: Raspberry Pi 4 8GB vs RTX 3060 12GB (2026)
- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- Grok Imagine 1.5 Shipped 720p Video — Run Local Image/Video Gen Instead
- Train a Kick Drum AI Model on 6GB VRAM (Linux Guide)
- Best GPU for Running Llama 3.1 8B Locally on a Budget (2026)
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Gaming CPU in 2026
- Raspberry Pi OS Moves to Linux 6.18 LTS: What Changes for Pi Builders
- How to run DeepSeek-R1 32B on Apple M3 Ultra
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- Best AM4 CPU for Budget Gaming and Local AI in 2026
- RX 580 in 2026: Still Worth It for 1080p Gaming?
- Steam Deck OLED vs ROG Xbox Ally X: Which Handheld Wins?
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090