XRDS -RF BNC Cables 1FT 2PCS
Bottom line: The XRDS -RF BNC Cables 1FT 2PCS: Silver-plated copper center conductor cuts high-frequency transmission loss; main trade-off: 1ft length only, too short to reach a remote-mounted antenna.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Silver-plated copper center conductor cuts high-frequency transmission loss
- ✓ True 50 ohm impedance matches ham radio, scanner, and SDR gear
- ✓ RG316 jacket handles heat, moisture, and corrosion for outdoor runs
Cons
- ✗ 1ft length only, too short to reach a remote-mounted antenna
- ✗ BNC male on both ends, so no female or SMA adapter included
- ✗ 50 ohm impedance is wrong for 75 ohm composite or CCTV video use
- ✗ No stated shield count, connector plating, or frequency rating
SpecPicks Verdict
SpecPicks scored XRDS -RF BNC Cables 1FT 2PCS using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. XRDS -RF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Connector Type: BNC Male to BNC Male ; Cable Type: Low Loss RG316 Coaxial Cable ;Length: 1ft; Impedance: 50 ohm
- Features: The inner conductor of this bnc coax is made of silver plated copper that high frequency and low transmission loss, low voltage standing wave ratio, durable use indoors and outdoors.
- The 50 ohm coax cable bnc RG316 coaxial cable has good anti-electromagnetic interference and softness, light weight, high temperature resistance, moisture resistance, corrosion resistance, etc.
- Application: the bnc coaxial cable is widely used for RF applications or flexible networks, ham radio, bnc attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance, etc
- Package: 2pcs bnc male to bnc male cable, any problem please contact our customer support.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Color | Silver |
| Model | RG316 |
| Package | 2pcs bnc male to bnc male cable, any problem please contact our customer support. |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 2.0 Count |
| Item Length | 1 Feet |
| Part Number | RG316 |
| Connector Type | BNC |
| Number of Pins | 2 |
| Number of Items | 2 |
| Special Feature | Portable |
| Connector Gender | Male-to-Male |
| Compatible Devices | Scanner |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | box |
| Compatible Phone Models | No Compatible Phone Models |
| Connectivity Technology | BNC |
| Recommended Uses For Product | Scanner communication, Portable shortwave radio, Ham radio |
| Full listing title | XRDS -RF BNC Cables 1FT 2PCS, 50 Ohm BNC Male Cable RG316 Antenna Cable for Antenna Scanners Handheld Ham Radios etc. |
Ready to buy?
XRDS -RF BNC Cables 1FT 2PCS, 50 Ohm BNC Male Cable RG316 Antenna Cable for Antenna Scanners Handheld Ham Radios etc. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Retro Gear Cables Melting Into Cases: Causes and Fixes
- Best Controllers for Steam Deck and PC in 2026
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- Microsoft + Nvidia AI PCs Run Real Agents: The Local Hardware That Matches (2026)
- Gemma 4 and Larger Qwen 3.6: What Hardware You'll Actually Need
- Silent, SD-Free Retro Storage: CompactFlash + IDE on Win98/XP
- Qwen 3.6 27B Quantization Showdown: BF16 vs Q8_0 vs Q4_K_M on Consumer GPUs
- RTX 4090 AI Server vs AMD Instinct: 2025 Guide
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- Is the RTX 5050 Really as Bad as Everyone Says?
- Claude Code Ran Hidden Repo Malware Unverified — Why Local AI Sandboxing Matters
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- Best 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI vs Samsung
- Open-WebUI on an RTX 3060: A Self-Hosted ChatGPT in 2026
- Intel Arc B390 Handhelds vs Steam Deck: The Predator Atlas 8
- MLX engine comparison… and oMLX is the top choice.
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma (2026)
- Best Electric Air Blowers for Gaming Keyboards & PC Fans
- LoRA Fine-Tuning Small LLMs on an RTX 3060 12GB in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090