GeeekPi Heatsink Fan Kit for Raspberry Pi
Bottom line: Per its Amazon listing, the GeeekPi Heatsink Fan Kit for Raspberry Pi: NOTE: For two-wired fans, the red pin is 5V IN, and the black is GND; this type of fan only supports voltage input between 3.3V and 5V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compatible with Raspberry Pi B, B+, A+, 2, 3, 4 model B and B+ and Pi Zero/Zero W
- ✓ Backed by GeeekPi's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GeeekPi Heatsink Fan Kit for Raspberry Pi, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatible with Raspberry Pi B, B+, A+, 2, 3, 4 model B and B+ and Pi Zero/Zero W
- Compatible with Jetson Nano series products and RockPi series products.
- Different materials of radiators are suitable for different occasions, with copper radiators, aluminum radiators, etc., and the fan also has different specifications.
- The version with three wires is a fan that supports PWM signal speed regulation, and other fans are suitable for cooling different SBCs, even for 3D printer's heat dissipation.
- NOTE: For two-wired fans, the red pin is 5V IN, and the black is GND. This type of fan only supports voltage input between 3.3V and 5V. For three-wired fans, in addition to the red and black pins, the blue pin can accept a PWM signal to control the fan speed.
Full Specifications
| Brand | GeeekPi |
|---|---|
| Unit Count | 1 Count |
| Part Number | KZ-0001 |
| Mounting Type | Panel Mount |
| Connection Type | Wired |
| Included Components | no |
| Warranty Description | NO |
| Cooler Heatsink Material | Aluminum or Copper |
| Cooler Heatsink Compatibility | Raspberry Pi B, B+, A+, 2, 3, 4 model B and B+ and Pi Zero/Zero W, Jetson Nano series products, RockPi series products |
| Full listing title | GeeekPi Heatsink Fan Kit for Raspberry Pi, Cooler Fan Heatsink Set with PWM Speed Control Fan for Cooling Raspberry Pi 4, Pi 3 B+, Pi 3 B, Pi 2, Pi B+, Pi Zero/Zero W and Jetson Nano, RockPi |
Benchmark data for other processors
Ready to buy?
GeeekPi Heatsink Fan Kit for Raspberry Pi, Cooler Fan Heatsink Set with PWM Speed Control Fan for Cooling Raspberry Pi 4, Pi 3 B+, Pi 3 B, Pi 2, Pi B+, Pi Zero/Zero W and Jetson Nano, RockPi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- 768GB Intel Optane DIMMs Running a 1-Trillion-Parameter LLM: How the Build Actually Works
- GPT-5.6 Sol Nearly Matches Fable 5 at a Third the Cost: The Local-Rig Angle
- Best Game Controller in 2026: 5 Picks for PC, Console and Retro
- Best Budget GPU for 1080p Gaming in 2026: Is the RTX 3060 12GB Still the Pick?
- Retro Windows XP: SSD Upgrade via IDE Adapter (2026 Guide)
- Run Qwen 3.6 27B Locally: VRAM, Quant & tok/s on a 12GB RTX 3060
- Forza Horizon 6 Runs Surprisingly Well on Steam Deck — Here's What Players Are Reporting
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- Is Your First Homelab Right? A 2026 Hardware Sanity Check on a Ryzen 5 5600G
- Reve 2.0 Debuts at #2: Can You Run Competitive Image Models on an RTX 3060 12GB?
- Best SSD for a Local LLM Workstation: NVMe vs SATA Model-Load Latency Tested
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- Raspberry Pi Locator Is Shutting Down: How to Find Pi 4 Stock in 2026
- News: Mistral Enters Robotics With Robostral Navigate 8B
- GPU Benchmark Data Freshness and Source Attribution in 2026
- Cheapest 1440p GPU in 2026: Budget Buying Guide
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- LiquidAI LFM2.5-8B-A1B: An 8B MoE You Can Run on a 12GB RTX 3060
- Genesis Mini vs SNES Classic vs a Pi RetroPie in 2026
- Best SATA SSD to Upgrade a PS4 Pro in 2026: Faster Loads on a Budget
- Building a Period-Correct 2003 LAN Party Rig with Athlon XP and Audigy 2 ZS
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090