BZ 3D 4010 Axia Fan DC 12V
Bottom line: Per its Amazon listing, the BZ 3D 4010 Axia Fan DC 12V ($14.98 on Amazon as of 2026-11-20 23:27 UTC): size: 40mm × 40mm × 10mm (L × W × H); rated Voltage: 12V DC.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Size: 40mm × 40mm × 10mm (L × W × H)
- ✓ Rated Voltage: 12V DC
- ✓ Backed by BZ 3D's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
After-sales guarantee: each defective item can be replacement for free or refund.If any question, please feel free to contact us,BZ 3D is committed to providing you with the best service!Package Includes:12V 4010 Axial Fan*2Extension wire*2
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BZ 3D 4010 Axia Fan DC 12V, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Product Parameters】 Size: 40mm × 40mm × 10mm (L × W × H). Bearing Type: Hydraulic Bearing. Rated Voltage: 12V DC. Current: 0.12A. Noise Level: 20 dB. Speed: 6500 RPM. Airflow: 7.3 CFM. Cable Length: 130cm (Original wire: 30cm + Extension wire: 100cm). Connector: XH2.54 2-pin.
- 【Hydraulic Bearing】 Featuring premium hydraulic bearings that offer quieter performance than traditional sleeve bearings while maintaining excellent durability. The life expectancy >45000 Hours.
- 【Quiet】Experience a serene environment with a noise level of just 20 dB, while still delivering robust airflow for superior cooling. It is the ideal thermal solution for home offices, bedrooms, and any space where quiet is valued, allowing you to focus, sleep, or relax without any acoustic disturbance.
- 【Efficient Cooling】 With a maximum airflow of up to 7.3 CFM, this fan effectively draws away heat and reduces the core temperature of devices. Its low operating current of 0.12A ensures exceptional cooling performance with minimal power consumption.
- 【Wide Compatibility】This fan is an ideal choice for 3D printers, routers, server cooling systems, gaming consoles, and other small electronic devices.
Full Specifications
| Brand | BZ 3D |
|---|---|
| Model | AMH663002 |
| Voltage | 12 volts |
| Wattage | 1.44 watts |
| Material | Plastic |
| Noise Level | 20 db |
| Part Number | AMH663002 |
| Material Type | Plastic |
| Cooling Method | forced air |
| Number of Items | 1 |
| Air Flow Capacity | 7.3 cfm |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 5000 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | 4010 Axia Fan DC 12V,40mm x 40mm x 10mm Hydraulic Bearing Low Noise Silent Brushless Cooling Fan for 3D Printers Extruder Hotend.(2PCS) |
Benchmark data for other processors
Ready to buy?
4010 Axia Fan DC 12V,40mm x 40mm x 10mm Hydraulic Bearing Low Noise Silent Brushless Cooling Fan for 3D Printers Extruder Hotend.(2PCS) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for the PS4 Pro in 2026: SATA Upgrade Guide
- Best Mini PC for Local LLM Inference in 2026: Ryzen vs Apple vs Intel
- Best Wireless Productivity Keyboards Under $50 in 2026
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Build a Self-Hosted Security Camera on a Raspberry Pi 4 8GB in 2026
- Sega Genesis Mini vs Raspberry Pi Emulation in 2026: Which to Buy?
- FIDECO vs Unitek vs Vantec: The Best IDE-to-USB Adapter for Rescuing Retro Drives in 2026
- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
- Best Streaming Kit for New Creators in 2026
- Best Raspberry Pi for Local LLMs & Home Lab in 2026: Pi 4 8GB vs Pi Zero
- Best SSD to Upgrade a PS4 in 2026
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel With an Updated LabWC Compositor
- Raspberry Pi 4 8GB Cyberdeck Build: A Practical 2026 Parts Guide
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- Pentium III Tualatin Overclocking and Slotket Build Guide: The Forgotten King of Socket 370
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- Sound Blaster vs Aureal Vortex 2: The Positional-Audio War Creative Won
- Logitech G29 vs HORI Force Feedback Wheel — Which First Wheel Is Right?
- OpenAI Codex Now Repeats Tasks From One Demo: Can a Local RTX 3060 Agent Match It?
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090