JRready ST5262 2Pcs Molex Micro Fit Extractors Microfit Terminal Release Tool Kit
Bottom line: The JRready ST5262 2Pcs Molex Micro Fit Extractors Microfit Terminal: Two tools cover Micro-Fit 3.0 female (DAP-D120) and male (DAP-D145) terminals; main trade-off: listed for Micro-Fit 3.0 only; Mini-Fit Jr. ATX and PCIe pins need a different tool.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two tools cover Micro-Fit 3.0 female (DAP-D120) and male (DAP-D145) terminals
- ✓ Spring-assisted ejector rod pushes the released contact out the rear of the housing
- ✓ Also listed for AMP Micro Mate-N-Lok series male terminals
- ✓ Quenched alloy steel tips resist deforming and corrosion
- ✓ Deburred, polished tips release locking clips without marring the terminal
Cons
- ✗ Listed for Micro-Fit 3.0 only; Mini-Fit Jr. ATX and PCIe pins need a different tool
- ✗ Just 2 tools in the kit, so no spare if a needle tip bends
- ✗ Both tools cite the same Molex 11-03-0043 equivalent, muddling part matching
- ✗ Camouflage handle styling is cosmetic and adds no function
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JRready ST5262 2Pcs Molex Micro Fit Extractors Microfit Terminal…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Two tools cover Micro-Fit 3.0 female (DAP-D120) and male (DAP-D145) terminals"; the main trade-off is "Listed for Micro-Fit 3.0 only; Mini-Fit Jr. ATX and PCIe pins need a different tool". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Ejector Rod Pin Extractor】 JRready ST5262 terminal removal tool kit includes 1 pc DAP-D120 terminal release tool (Molex 11-03-0043 Equivalent) for Molex Micro-Fit 3.0 (MX3.0) female terminal and 1 pc DAP-D145 (Molex 11-03-0043 Equivalent) terminal release tool for Molex Micro-Fit 3.0 (MX3.0) male terminal and AMP Micro Mate-N-Lok series male terminal.
- 【Unique Ejector Rod Desigh】The ejector rod pin extractor kit equipped with an integrated assist spring. During operation, needle head slides down both sides of the contact from the front and releases the locking clip. Push the ejector rod then spring ejects the contact out of the rear, making pin remove quick, convenient, and efficient.
- 【Upgraded Design Handle】Electrical terminal release tool features a brilliant camouflage handle. The fashionable camouflage design is discernible, paired with an upgraded ergonomic hexagonal handle for a comfortable, non-slip grip.
- 【Premium Replacement Tips】The pin extractor's tip is made of high-quality alloy steel with quenching process promises high strength and not easy to deform,anti-corrosive.Smooth and non-sharp due to magnetic deburring and polishing, it ensures safe use and doesn't damage the terminal.
- 【Multi-Application】The JRready electrical terminal removal tool kit is suitable for application of the Molex Micro-Fit 3.0 Connector System,AMP Micro Mate-N-Lok Series Male Terminal,such as computers, work stations, satellites and a wide range of consumer products.
Full Specifications
| Brand | JRready |
|---|---|
| Model | ST5262 |
| Compatibility | PC |
| Package Dimensions | 7.8 x 1.85 x 0.75 inches |
| Manufacturer Part Number | ST5262 |
| Full listing title | JRready ST5262 2Pcs Molex Micro Fit Extractors Microfit Terminal Release Tool Kit for Molex MX3.0 Male/Female Terminals Microfit 3.0 Extraction Tool for Micro-Fit Terminals Pin Removal Tool Kit |
Ready to buy?
JRready ST5262 2Pcs Molex Micro Fit Extractors Microfit Terminal Release Tool Kit for Molex MX3.0 Male/Female Terminals Microfit 3.0 Extraction Tool for Micro-Fit Terminals Pin Removal Tool Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Best Budget Ryzen Gaming PC Parts in 2026: 5 Picks That Punch Up
- Best GPU for Stable Diffusion Under $300 (2026): RTX 3060
- Grok 4.5 Tops AutomationBench at 51%: Cloud Score vs Local-Rig Reality
- Best Gaming Mice for Competitive FPS in 2026
- AVX-512 Speeds Up Linux Software RAID by Up to 41% on AMD Ryzen
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
- Sound Blaster in 2026: Using the Creative Sound BlasterX G6 on a Retro and Modern PC
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- IBM Granite 4.1 (3B / 8B / 30B): Local Inference Benchmarks and Hardware Picks
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- hipEngine on Strix Halo + 7900 XTX: Native Qwen 3.6 Inference Without ROCm Drama
- CRT vs Monitor for Retro Gaming: Which Wins in 2026
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 240mm AIO
- Fine-Tune Video and Image Models at Scale: NeMo vs Diffusers
- AI-Assisted Sound Card Driver Install on Vintage WinXP: How a Vision LLM Automates the Sound Blaster Audigy FX
- RTX 4000 SFF Ada vs RTX PRO 4000 SFF Blackwell for Local LLMs: 20GB vs 24GB at 70W
- Why AI Memory Bandwidth Matters: From Micron's HBM to Your GDDR6
- Samsung Odyssey OLED G9 Drops $700 — and a Cheaper 4K Path
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Best GPU for Local LLMs Under $400: Why the RTX 3060 12GB Beats the 8GB Trap
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090