Skip to main content
RetroScaler2x AV/SV/YPBPR to HDMI™ Converter - Supports Line Doubler, Filter and Pass-Through Modes, Video Game Adapter with No Lag, for PS2/N64/Dreamcast/Saturn/MD/NGC/SFC and More (Red)
BITFUNX

BITFUNX RetroScaler2x AV/SV/YPBPR to HDMI™ Converter

Bottom line: The BITFUNX RetroScaler2x AV/SV/YPBPR to HDMI™ Converter: Zero-lag line doubling, verified across multiple measurement devices; main trade-off: no NTSC/PAL cross-conversion, so PAL output can fail on NTSC-only displays.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For projectors, gaming displays and video upscalers, synthesises manufacturer specs against measured reviews (ProjectorCentral, RTINGS), treating non-ANSI "lumen" figures as marketing claims rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference. How we check display specs →

Pros & Cons

Pros

  • ✓ Zero-lag line doubling, verified across multiple measurement devices
  • ✓ Handles composite, S-Video and YPbPr on one box, no separate adapters
  • ✓ Toggleable filter mode: off for 2D sprites, on for smoothing 3D titles
  • ✓ Pass-through mode digitizes the raw signal without scaling for capture rigs
  • ✓ Rare 240p support survives to HDMI, and back to VGA with a cheap adapter

Cons

  • ✗ No NTSC/PAL cross-conversion, so PAL output can fail on NTSC-only displays
  • ✗ Caps at 480p/576p, so no 720p or 1080p integer scaling
  • ✗ Filter mode is preference-based, expect trial and error per console
  • ✗ 240p-to-VGA workflow needs a second HDMI-to-VGA converter you must buy

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for BITFUNX RetroScaler2x AV/SV/YPBPR to HDMI™ Converter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. On the listing's own facts, the case for it is "Zero-lag line doubling, verified across multiple measurement devices"; the main trade-off is "No NTSC/PAL cross-conversion, so PAL output can fail on NTSC-only displays". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Supports 240p/480i/288p/576i NTSC/PAL sources to converter to 480p/576p HDMI-compatible output (480p for NTSC, 576p for PAL). And it is a zero lag device, proven using multiple measurements and different devices.
  • The “Filter Mode” is completely preference-based, but the average retro-gamer prefers the FIL mode off for 2D games (SNES, Genesis, etc) and on for 3D games. Also, the FIL mode might help reduce flicker with some 480i-only games.
  • Both NTSC and PAL signals are supported, but they are not converted to each other. That means you can plug in whatever signal your target device is compatible with, but NTSC might not work on PAL HDMI-compatible devices and vice versa.
  • By putting the RetroScaler2X into pass-through mode, incoming composite, s-video or component signals are simply transparent and digitized into HDMI-compatible.
  • Support for 240p is rare in the world of HDMI-compatible, but by adding a simple HDMI-compatible to VGA converter, you can convert the signal back to the analogue domain again.

Full Specifications

BrandBITFUNX
ColorRed
FinishGlossy
Unit Count1.0 Count
Model NumberAV/SV/YPBPR to HDMI Converter
CompatibilityN64, SNES
Warranty TypeLimited
Connector TypeComponent, HDMI
Item Dimensions1.1 x 4.33 x 2.48 inches
Mfr Part NumberAV/SV/YPBPR to HDMI Converter
Number of Items1
Number of Ports3
Power Plug TypeType A - 2 pin (North American)
Compatible DevicesPS2, N64, Dreamcast, Saturn, Megadrive, SNES, SFC
Warranty DescriptionONE YEAR
Smart Home CompatibilityNot Smart Home Compatible
Item dimensions L x W x H1.1 x 4.33 x 2.48 inches
Specific Uses For ProductVideo Game Console
Full listing titleRetroScaler2x AV/SV/YPBPR to HDMI™ Converter - Supports Line Doubler, Filter and Pass-Through Modes, Video Game Adapter with No Lag, for PS2/N64/Dreamcast/Saturn/MD/NGC/SFC and More (Red)

Ready to buy?

RetroScaler2x AV/SV/YPBPR to HDMI™ Converter - Supports Line Doubler, Filter and Pass-Through Modes, Video Game Adapter with No Lag, for PS2/N64/Dreamcast/Saturn/MD/NGC/SFC and More (Red) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Displays & Upscalers

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →