10-Pack GT-1 Silver CPU Thermal Paste (1g*10), GPU Heat Sink Paste
Bottom line: The GENNEL 10-Pack GT-1 Silver CPU Thermal Paste ($9.99 on Amazon as of 2026-10-21 04:20 UTC): Ten separate 1g syringes - fresh paste per job, no half-dried tube; main trade-off: no W/mK conductivity figure published in the listing specs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Ten separate 1g syringes - fresh paste per job, no half-dried tube
- ✓ Non-conductive and flame retardant, safer near exposed SMD parts
- ✓ Kit includes wipes, finger cots and spatulas for full teardowns
- ✓ Rated -50C to 240C working range for hot vintage chipsets
Cons
- ✗ No W/mK conductivity figure published in the listing specs
- ✗ 1g per syringe is tight for large IHS or GPU cold plates
- ✗ Carbon/silicon compound, not a liquid metal or high-end ceramic
- ✗ Silver in the name refers to color, not silver-particle loading
Manufacturer description
The GENNEL GT-1 silver thermal paste ships as a 10-pack of 1g syringes, which is the practical reason it belongs on a retro PC workbench: when you are re-pasting a stack of Socket 7 heatsinks, an aging GPU, or a shelf of donor boards, you want a fresh single-use syringe per job rather than a half-dried tube from three years ago. Each 1g portion covers a typical CPU or GPU die with margin, and the kit includes cleaning wipes, finger cots, and spatulas so you can strip old compound and spread the new layer without hunting for isopropyl swabs mid-teardown. GENNEL builds GT-1 from carbon and…
SpecPicks Verdict
SpecPicks scored GENNEL 10-Pack GT-1 Silver CPU Thermal Paste using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. GENNEL's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How much thermal paste is in each syringe?
Each syringe holds 1 gram, and the pack contains 10 of them for 10 grams total. One gram covers a typical desktop CPU or GPU die, though a large heat spreader may use most of a syringe.
Is this thermal paste safe to use around exposed components?
GENNEL lists GT-1 as non-conductive, non-volatile, and flame retardant, which the brand says eliminates short-circuit, discharge, and corrosion risk to the chip and heatsink. That makes it a reasonable pick for vintage boards with bare SMD parts near the socket.
What temperature range does GT-1 handle?
The listed working range is -50C to 240C. The compound is made mainly from carbon and silicon compounds, which is what gives it that spread.
Does it come with application tools?
Yes. The 10-pack ships with cleaning wipes, finger cots, and spatulas, so you can remove old compound and spread the new layer without sourcing separate supplies.
Is 10 syringes worth it if I only have one PC?
At 9.99 for the pack it works out to about a dollar per application, so it pays off if you re-paste periodically, restore retro hardware, or maintain several machines. For a single one-time re-paste, a single-tube product may suit you better.
Key Features
- High Thermal Conductivity thermal compound for optimal heat-transfer from the CPU/GPU to the heatsink, Perfect consistency can improve the thermal conductivity of contact surface.
- Wide Working Temperature Range -50℃ to 240℃, GT-1 thermal paste is mainly made of carbon compounds and silicon compounds. Provides excellent thermal conductivity.
- Easy to clean and use: Viscously balanced formula allow for easy application and clean up. Comes with cleaning wipes, finger cots and spatulas. Easy to handle even for beginners.
- Long-lasting and Stable Performance: the thermal paste uses highly stable and reliable compound materials, perfectly extending the service life.
- Safety Application: non-conductive, non-volatile, flame retardant, which eliminates the risk of short circuit and discharges and corrosion damage to the chip and the radiator.
Full Specifications
| Brand | GENNEL |
|---|---|
| Weight | 1g |
| Long-lasting and Stable Performance | the thermal paste uses highly stable and reliable compound materials, perfectly extending the service life. |
Ready to buy?
10-Pack GT-1 Silver CPU Thermal Paste (1g*10), GPU Heat Sink Paste is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Building a Period-Correct 2003 WinXP Gaming Rig with Sound Blaster Audigy and a Modern 8BitDo Controller
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- $100 CPU Shootout: Ryzen 5 5500 vs Core i3-14100F vs i3-12100F
- Building a Silent Win98/XP Boot Drive: CompactFlash + IDE Adapter Setup
- Best SSD for a 1TB+ Steam Library in 2026: SATA vs NVMe Showdown
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- Build a Raspberry Pi 4 8GB NAS with SATA SSDs in 2026
- Troubleshooting Ryzen 5 5600X No-POST: Memory, BIOS, and Cooler Mount Fixes (2026)
- Count Anything Runs Locally on a 12GB GPU: Object-Counting AI on the RTX 3060
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Best Budget Gaming Laptops of 2026: Buyer's Guide
- Intel Arc Pro B60 AI Performance: 24GB VRAM Explained
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
- Best Handheld Gaming PC Under $300 in 2026
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Best Budget Battlestation 2026: 5 Picks That Punch Up
- MSI RTX 3060 Ventus 2X vs ZOTAC RTX 3060 Twin Edge: Which $300 1080p GPU Wins in 2026?
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Ryzen 7 5800X3D vs Core i7-14700K: DDR4's Last Big Fight
- AI Technologies We'll Realistically See in Our Lifetimes
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090