XRDS -RF
XRDS -RF BNC Cable 10FT
Bottom line: The XRDS -RF BNC Cable 10FT ($15.99 on Amazon as of 2026-10-07): BNC male to BNC bulkhead female, ready to pass RF through an enclosure or panel wall; main trade-off: thin RG316 loses more signal over long runs than thicker coax like RG58 or LMR-400.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ BNC male to BNC bulkhead female, ready to pass RF through an enclosure or panel wall
- ✓ 50 ohm impedance matches ham, CB, UHF/VHF and wireless mic receiver gear
- ✓ Solid copper inner conductor for low transmission loss and low VSWR
- ✓ Thin, flexible RG316 routes easily through tight spaces and cable glands
- ✓ 10ft length reaches from a rack-mounted receiver to a remote antenna panel
Cons
- ✗ Thin RG316 loses more signal over long runs than thicker coax like RG58 or LMR-400
- ✗ No power handling rating listed, so check limits before use with a transmitter
- ✗ BNC ends only; SO-239, SMA or N-type radios need separate adapters
- ✗ Bulkhead end needs a drilled panel hole to mount properly
SpecPicks Verdict
SpecPicks scored XRDS -RF BNC Cable 10FT using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. XRDS -RF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Connector Type: BNC Male to BNC Bulkhead Female ; Cable Type: RG316 Coaxial Cable ;Length: 10ft; Impedance: 50 ohm
- The 50 ohm coax cable bnc RG316 coaxial cable has good anti-electromagnetic interference and softness, light weight, high temperature resistance, moisture resistance, corrosion resistance, etc.
- Features: The inner conductor of this bnc coax is made of solid copper that high frequency and low transmission loss, low voltage standing wave ratio, durable use indoors and outdoors.
- Application: the bnc coaxial cable is widely used for RF applications or flexible networks, ham radio, bnc attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance.
- Package:10FT BNC Male to Female Bulkhead Mount RG316 Coax, any problem please contact our customer support.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Color | Brown |
| Model | RG316-BNC-JKY-10FT |
| Package | 10FT BNC Male to Female Bulkhead Mount RG316 Coax, any problem please contact our customer support. |
| Cable Type | Coaxial Cable |
| Item Shape | Round |
| Unit Count | 10 Feet |
| Item Length | 10 feet |
| Part Number | RG316-BNC-JKY-10FT |
| Connectivity | Wireless |
| Connector Type | BNC |
| Number of Pins | 2 |
| Connection Type | Wireless |
| Special Feature | Low-Loss |
| Connector Gender | Male-to-Female |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Connectivity Technology | BNC |
| Recommended Uses For Product | RF applications or flexible networks, ham radio, bnc attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance |
| Full listing title | XRDS -RF BNC Cable 10FT, 50 Ohm BNC Male to Female Bulkhead Mount RG316 Coax for Wireless Microphone System Receiver CB Radio UHF VHF Ham Radio Amateur Radio Mobile Radio Antenna |
Ready to buy?
XRDS -RF BNC Cable 10FT, 50 Ohm BNC Male to Female Bulkhead Mount RG316 Coax for Wireless Microphone System Receiver CB Radio UHF VHF Ham Radio Amateur Radio Mobile Radio Antenna is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Driver Install for Win98: Vision-LLM + 3060 12GB Build (2026)
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Can Local LLMs Actually Do Anything Useful?
- RTX 5090 vs. M5 Max 128GB for Agentic Dev (2026)
- The Best Retro Game Emulators for Mac in 2026
- Best Raspberry Pi Alternative for Home Assistant (2026)
- How to run Qwen 3 14B on AMD Radeon RX 7900 XTX
- Best Budget Sim Racing Wheel: Logitech G29 vs HORI vs Thrustmaster
- Train Your Own LLM From Scratch: 2026 Hardware Guide
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- Sound Blaster Live! Restoration Guide: Period-Correct Audigy FX Bridge for Win98 Builds
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- GLM-5.2 on an RTX 3060 12GB: Can the New Open-Weights Leader Run Local?
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Gemini 3.5 Flash vs Local LLMs on a 12GB GPU: When Cloud Wins
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming + Local-AI Build
- CPU Offload for Local LLMs: Does a Ryzen 7 5800X Help?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090