XRDS -RF BNC Cable 2FT 2PCS
Bottom line: The XRDS -RF BNC Cable 2FT 2PCS: 2-pack of 2ft cables: BNC male on one end, bulkhead-mount BNC female on the other; main trade-off: 50 ohm, not 75 ohm, so a poor match for 75 ohm video and RGB display gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2-pack of 2ft cables: BNC male on one end, bulkhead-mount BNC female on the other
- ✓ 50 ohm impedance suits ham, CB, UHF/VHF radio and wireless mic receiver antennas
- ✓ Solid copper center conductor, listed for low transmission loss and low VSWR
- ✓ Flexible, light RG316 coax that is easy to route through tight enclosures and panels
- ✓ Listed as resistant to heat, moisture and corrosion for indoor or outdoor use
Cons
- ✗ 50 ohm, not 75 ohm, so a poor match for 75 ohm video and RGB display gear
- ✗ 2ft length only works for short jumpers, not long antenna feed runs
- ✗ Bulkhead female end needs a panel cutout if you want to mount it
- ✗ Max frequency and power handling are not stated in the listing
SpecPicks Verdict
SpecPicks scored XRDS -RF BNC Cable 2FT 2PCS using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. XRDS -RF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Connector Type: BNC Male to BNC Bulkhead Female ; Cable Type: RG316 Coaxial Cable ;Length: 2ft; Impedance: 50 ohm
- The 50 ohm coax cable bnc RG316 coaxial cable has good anti-electromagnetic interference and softness, light weight, high temperature resistance, moisture resistance, corrosion resistance, etc.
- Features: The inner conductor of this bnc coax is made of solid copper that high frequency and low transmission loss, low voltage standing wave ratio, durable use indoors and outdoors.
- Application: the bnc coaxial cable is widely used for RF applications or flexible networks, ham radio, bnc attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance.
- Package:2PCS 2FT BNC Male to Female Bulkhead Mount RG316 Coax, any problem please contact our customer support.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Color | Brown |
| Model | RG316-BNC-JKY-2FT-2PCS |
| Package | 2PCS 2FT BNC Male to Female Bulkhead Mount RG316 Coax, any problem please contact our customer support. |
| Cable Type | Coaxial Cable |
| Item Shape | Round |
| Part Number | RG316-BNC-JKY-2FT-2PCS |
| Connectivity | Wireless |
| Connector Type | BNC |
| Number of Pins | 2 |
| Connection Type | Wireless |
| Number of Items | 2 |
| Special Feature | Low-Loss |
| Connector Gender | Male-to-Female |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Connectivity Technology | BNC |
| Other Special Features of the Product | Low-Loss |
| Full listing title | XRDS -RF BNC Cable 2FT 2PCS, 50 Ohm BNC Male to Female Bulkhead Mount RG316 Coax for Wireless Microphone System Receiver CB Radio UHF VHF Ham Radio Amateur Radio Mobile Radio Antenna |
Ready to buy?
XRDS -RF BNC Cable 2FT 2PCS, 50 Ohm BNC Male to Female Bulkhead Mount RG316 Coax for Wireless Microphone System Receiver CB Radio UHF VHF Ham Radio Amateur Radio Mobile Radio Antenna is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- HyperX QuadCast 2 vs Blue Yeti: Best Streaming Mic in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget AM4 CPU 2026
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- Period-Correct Windows 98 Boot Drive: CompactFlash vs IDE SSD
- Period-Correct Windows 95 Pentium MMX Build Guide: 3dfx Voodoo 1, AWE32, and Authentic 1996 Gaming
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs ML240L
- Best Raspberry Pi Starter Kits for Beginners (2026)
- RTX 5090 AI Models: Performance, VRAM, Power
- Raspberry Pi 4 8GB vs Ryzen 5 2600 for Gemma 3 4B: Which Cheap Box Wins?
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Best USB Microphone and Streaming Kit for Creators in 2026
- Dual RTX 3060 12GB: 24GB of VRAM for GLM-5.2 on a Budget?
- Best Budget Streaming Starter Kit for Twitch & YouTube in 2026
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- What Handheld Console Should I Buy in 2026? A Decision Framework
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- Build a Raspberry Pi Zero W Retro Emulation Handheld in 2026
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Troubleshooting WinXP Audigy FX Install Failures in 2026
- AMD Ryzen AI Halo: A DGX Spark Rival at Mini-PC Size
- Best Gaming Mouse for Logitech G502 Hero Loyalists in 2026
- When a Game Boy Clone Runs Too Fast: The Crystal-Swap Fix Behind a Viral Repair
- Best Budget PC Upgrades for 1440p Gaming in 2026
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090