Zjmehty
Zjmehty Gateron G Pro 3.0 Blue Switches for Mechanical Keyboard
Bottom line: The Zjmehty Gateron G Pro 3.0 Blue Switches for Mechanical Keyboard ($23.99 on Amazon as of 2026-10-07): Clicky 60gf actuation over a full 4mm travel, tuned for typing feedback and gaming; main trade-off: clicky sound profile carries in shared offices and on open mics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Clicky 60gf actuation over a full 4mm travel, tuned for typing feedback and gaming
- ✓ Factory pre-lubed out of the box, so no hand-lubing session before install
- ✓ Three-layer enhanced pin design resists bending during hot-swap installs
- ✓ Rated for 100 million keystroke cycles per the manufacturer spec
- ✓ 108-piece count covers a full-size board with spares; 36 and 72 packs also sold
Cons
- ✗ Clicky sound profile carries in shared offices and on open mics
- ✗ 60gf is heavier than typical 45-50gf switches, so long sessions can tire fingers
- ✗ 3-pin design needs plate mounting or PCB clipping on some 5-pin boards
- ✗ Switch opener is not included, so filming or retooling needs a separate purchase
SpecPicks Verdict
SpecPicks scored Zjmehty Gateron G Pro 3.0 Blue Switches for Mechanical Keyboard using a rating × review-volume × price-fit model applied to published specs and reviews across the gaming peripherals category. Zjmehty's gaming peripherals lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for gaming peripherals of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [High Quality]:Gateron G Pro 3.0 series meachanical keyboard switches,with smooth and comfortable typing exprience,Good gaming performance;Super long mechanical life with 100million cycles.The switches are factory lubricated and ready to use,there are 36pcs,72pcs,108pcs three sizes to choose from.
- [Feature]:Compared to G Pro 2.0,Gateron Pro 3.0 series switches with three-layer enhanced pin design,not easy to bend,Improve the stability and life of the switch,Stiffened but not thickened;Upgraded fine grain surface light guide column,uniform light effect,more transparent and more concentrated light.
- [Product parameters]:Gateron G Pro 3.0 blue,Clicky Switches;Total travel-4mm,Operating force-60gf;Good for gaming.
- [Compatibility]:With transparent top cover design,Compatible with 3or5 pin most hot swappable mechanical keyboard or custom built keyboard;Compatible for RGB/SMD/LED hot swappable keyboard.
- [Packaging]:Using a exquisite and beautiful PVC plastic box,and placing every switch separately which can better protect the shaft body from damage and prevent pins from bending,perfect as a gift for mechanical keyboard lover.Note:Switch Opener is not include.
- [Reduce Stress and Anxiety]:Gateron G Pro 3.0 Blue Keyboard Switches have a satisfying mechanical Clicky sound, can be used as keyboard fingertip toys, fingertip clicker keyboard fingertip keychains, buttons fingertip gifts, suitable for adults to relieve stress, pass the time, and help to reduce stress and anxiety, ideal for work and study environments
Full Specifications
| Brand | Zjmehty |
|---|---|
| Color | blue |
| Model | Gateron G Pro 3.0-3 |
| Material | Plastic or Acrylic |
| Terminal | Solder |
| Unit Count | 108 Count |
| Switch Type | Clicky |
| Circuit Type | 3-way |
| Contact Type | Normally Closed |
| Control Type | manual |
| Actuator Type | Mechanical Switch |
| Compatibility | Switch |
| Material Type | Plastic or Acrylic |
| Mounting Type | Panel Mount |
| Connector Type | Pin Header |
| Control Method | Touch |
| Operation Mode | Mechanical |
| Controller Type | Push Button |
| Item Dimensions | 7.09 x 4.72 x 1.57 inches |
| Number of Items | 108 |
| Full listing title | Gateron G Pro 3.0 Blue Switches for Mechanical Keyboard,3-Pin 60gf Clicky/Pre-Lubed/Pin-Enhanced Switches(108pcs,Blue) |
Ready to buy?
Gateron G Pro 3.0 Blue Switches for Mechanical Keyboard,3-Pin 60gf Clicky/Pre-Lubed/Pin-Enhanced Switches(108pcs,Blue) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Gaming Peripherals
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- HiDream-O1-Image Debuts as Top Open-Weights Text-to-Image Model
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
- Best Plug-and-Play Retro Game Console in 2026
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- RTX 5070 Ti vs RTX 5090 for Local LLMs: 16GB vs 32GB
- AI Technologies We'll Realistically See in Our Lifetimes
- Train Your Own LLM From Scratch: 2026 Hardware Guide
- Intel Arc Pro B60 Creator 24GB: Workstation GPU Guide
- Troubleshooting 3dfx Voodoo Cards on Modern AGP Builds: The 2026 Recovery Playbook
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
- Leanstral 1.5 on the RTX 3060 12GB: Open Math and Code on a Budget GPU
- GameSir G7 SE vs DualSense for PC Gaming in 2026
- GLM-5.2 on an RTX 3060 12GB: Can a Budget Card Run Long-Horizon Agents?
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- Intel Nova Lake-S 22-Core vs AMD Ryzen 7 5800X: Is the Cache Chip Worth Upgrading?
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Ryzen AI Max vs RTX 40 Series: Which Wins for AI and Gaming?
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- Best Budget AM4 Gaming PC Parts in 2026
- Intel Axes BigDL: What It Means for CPU and Arc LLM Inference
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090