Teyleten Robot 24 Pins ATX Power Supply Breakout Board Module Adapter Power Connector Support 3.3V/5V/12V 1.8V-10.8V
Bottom line: The Teyleten Robot 24 Pins ATX Power Supply Breakout Board Module Adapter is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Teyleten Robot's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
1. The power adapter board is compatible with all 20Pin and 24Pin AT computer idle power supply. 2. 6 USB ports on board, each USB port can output 5V 2A current can be given to all 5V device charging, power supply. 3. Can be inserted at the same time 6 groups of USB ports will not interfere with each other, resulting in the inability to synchronize the output.
SpecPicks Verdict
SpecPicks scored Teyleten Robot 24 Pins ATX Power Supply Breakout Board Module… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Teyleten Robot's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 1. The power adapter board is compatible with all 20Pin and 24Pin AT computer idle power supply.
- 2. 6 USB ports on board, each USB port can output 5V 2A current can be given to all 5V device charging, power supply.
- 3. Can be inserted at the same time 6 groups of USB ports will not interfere with each other, resulting in the inability to synchronize the output.
Full Specifications
| Brand | Teyleten Robot |
|---|---|
| Wattage | 60 watts |
| Model Name | 3e0b7ab2-1f73-4218-afea-699cbdbbd9fa |
| Form Factor | ATX |
| Connectivity | USB |
| Connector Type | ATX |
| Cooling Method | Air |
| Output Wattage | 60 watts |
| Number of Items | 1 |
| Compatible Devices | Personal Computer |
| Connector Quantity | 6 |
| Power Supply Design | Internal |
| Number of Connectors | 6 |
| Maximum Input Voltage | 12 volts |
| Minimum Input Voltage | 110 volts_of_alternating_current |
| System Bus Connector Type | 24 Pin |
| Connector Type Used on Cable | ATX |
Ready to buy?
Teyleten Robot 24 Pins ATX Power Supply Breakout Board Module Adapter Power Connector Support 3.3V/5V/12V 1.8V-10.8V is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- How to Make Steam Deck Intros Last Longer (2026)
- 1440p 165Hz vs 4K 60Hz: ASUS TUF VG27 vs SANSUI 27" for Gaming
- Best Plug-and-Play Retro Game Console in 2026
- How to Image a Vintage IDE Hard Drive in 2026 With a USB Adapter
- This DIY 'Steam Controller Puck' Emulates Xbox, Switch & PS Pads
- Ollama vs llama.cpp for Single-User Chat on an RTX 3060 12GB (2026)
- Claude Sonnet 5 Closes the Opus Gap: When Local Still Wins
- Self-Host Immich on a Raspberry Pi 4 8GB: A Google Photos Replacement
- Best Single-Board Computers for Home Lab in 2026
- Ryzen 7 5700X + RTX 3060 12GB: The Best Value 1080p Combo in 2026
- Best AMD GPU for 4K Gaming in 2026
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Ryzen AI Max 400 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Build a Plex Media Server on a Raspberry Pi 4 8GB in 2026
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for an Overclocked Ryzen
- Best Controller for Steam Deck Docked Mode in 2026
- RTX 5070 Ti vs 4070 Ti SUPER
- Best Mouse Pad for Competitive FPS Aiming on Large Desks (2026)
- How Creative's Sound Blaster Ruled PC Audio for 20 Years
- Adding USB Storage to a Windows 98 PC With a SATA/IDE Adapter
- CompactFlash vs SATA SSD vs IDE-to-USB: Best Storage for a Retro PC
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090