Skip to main content
ShakingTank ARGB and PWM Hun, 9 Ports for A-RGB &PWM Case Fan Hub with Controller and SATA Power Input, Magnetic backplane Splitter 5V/3PIN Case Fan Hub Adapter PWM ARGB Fan White
Shaking Tank

ShakingTank ARGB and PWM Hun

Status: ShakingTank ARGB and PWM Hun: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The ShakingTank ARGB and PWM Hun: Nine PWM ports plus nine 5V 3-pin ARGB ports on one board; main trade-off: bundled controller switches lighting only, not fan speed.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: Thermalright ARGB Fan HUB Controller Support 8… — $9.27 on Amazon as of 2026-11-21 23:15 UTC (price may vary).

Similar: Thermalright Fan and ARGB HUB X8 ARGB/PWM Hub… — $9.51 on Amazon as of 2026-11-22 05:14 UTC (price may vary).

Similar: SHAKING TANK ARGB and PWM Fan hub — $10.44 on Amazon as of 2026-11-21 23:14 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Nine PWM ports plus nine 5V 3-pin ARGB ports on one board
  • ✓ SATA power straight from the PSU, not the motherboard header
  • ✓ Magnetic backplane mounts to steel without adhesive tape
  • ✓ Compact 4.64 x 2.2 x 0.67 in footprint hides behind cable channels

Cons

  • ✗ Bundled controller switches lighting only, not fan speed
  • ✗ PWM control still needs a free 4-pin motherboard header
  • ✗ Only 5V 3-pin ARGB supported, not 12V 4-pin RGB
  • ✗ Magnet needs a steel mounting surface; useless on aluminum cases

Manufacturer description

The ShakingTank ARGB and PWM Fan Hub solves the wiring problem every multi-fan build runs into: a single motherboard header can't drive nine fans and nine light strips. This 2-in-1 hub gives you nine 4-pin PWM ports and nine 5V 3-pin ARGB ports on one board measuring 4.64 x 2.2 x 0.67 inches, small enough to tuck behind a cable channel. Power comes straight from your PSU over SATA rather than the motherboard, which keeps fan speed steady across all nine ports instead of sagging as you add more fans. The magnetic backplane sticks to any steel surface inside your case, so there's no…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ShakingTank ARGB and PWM Hun, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Nine PWM ports plus nine 5V 3-pin ARGB ports on one board"; the main trade-off is "Bundled controller switches lighting only, not fan speed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many fans can this hub actually run at once?

Up to nine. The board has nine 4-pin PWM ports and nine 5V 3-pin ARGB ports, so nine fans plus their lighting run off one hub.

Does it work with 12V 4-pin RGB fans?

No. Shaking Tank specifies 5V 3-pin ARGB fans and ARGB LED light bars only. Check your fan's connector before ordering.

Why does it use SATA power instead of the motherboard?

Drawing from the PSU over SATA avoids overloading a motherboard header. Shaking Tank says this prevents stray currents and voltage loss so fan speed stays smooth across all nine ports.

Can the included controller change fan speeds?

No. The manufacturer states the controller is for light switching only. For PWM fan control you must connect the hub to a 12V 4-pin header on your motherboard.

Where does it mount inside the case?

The magnetic backplane attaches to any steel surface in your case, no double-sided tape needed. At 4.64 x 2.2 x 0.67 inches it fits in most cable-management areas.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【ARGB PWM 2 IN 1 9port Fan Hub】Each port of the ARGB pwm fan hub splitter is PWM function that adjust the fan speed synchronization, easy extend computer case fans to optimize the cooling capacity. Support 5v 3pin ARGB pc fans and ARGB light bars.
  • 【Magnetic Back Design】This 1 to 9 case fan hub is magnetic design, which can be attached to the metal surface of pc case without double-sided tape, very convenient to place on the computer case and put anywhere you want to.
  • 【Widely Compatible】The fan hub splitter supports up to 9 fans, including 9 4pin PWM ports and 9 ARGB ports for ARGB fans and ARGB LED strips. The installation is convenient and efficient.
  • 【SATA Power Input】 Fans are input directly from power supply via Sata Power, supporting up to 9 fans, the fan hub prevent stray currents and no voltage loss make sure fan speed smoother and efficient operation.
  • 【Small And Exquisite】The size of pwm fan hub is 4.64x 2.2 x 0.67inches, small and exquisite shape makes the internal wiring of your computer case tidy.
  • 【NOTE】 THE CONTROLLER ONLY FOR LIGHT SWITCHING, PLEASE CONNECT 12V 4PIN INTERFACE ON MOTHERBOARD FOR FAN PWM FUNCTION.

Full Specifications

BrandShaking Tank
Model/
Voltage12 volts_of_direct_current
MaterialPlastic
Dimensions4.64x 2.2 x 0.67inch
Unit Count1 Count
Part Number/
CompatibilityPC
Material TypePlastic
Cooling MethodAir
Number of Items1
Number of Packs1
Compatible DevicesDesktop
Included Components2-in-1 ARGB PWM Fan Hub with Controller WH
Power Connector Type4-Pin
Item Dimensions L x W x H2.2"L x 0.67"W x 4.64"H
Full listing titleShakingTank ARGB and PWM Hun, 9 Ports for A-RGB &PWM Case Fan Hub with Controller and SATA Power Input, Magnetic backplane Splitter 5V/3PIN Case Fan Hub Adapter PWM ARGB Fan White

Ready to buy?

Amazon shows no buyable offer for ShakingTank ARGB and PWM Hun at the last check. A similar in-stock product is Thermalright ARGB Fan HUB Controller Support 8…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $9.27

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
Thermalright ARGB Fan HUB Controller Support 8…
Similar, in stock — $9.27 →