Skip to main content
BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 300LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING WS2812B IC RGB LED Strip

Bottom line: The BTF-LIGHTING WS2812B IC RGB LED Strip ($29.99 on Amazon as of 2026-10-21 04:18 UTC): 300 individually addressable pixels, 24-bit color and 256 brightness steps per LED; main trade-off: no power supply or controller included; both are separate purchases. Another in-stock pick with the same 16.4ft LED strip: the Govee Smart RGB LED Strip Lights, $19.98 on Amazon as of (price may vary).

$29.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 300 individually addressable pixels, 24-bit color and 256 brightness steps per LED
  • ✓ UL Listed strip with UL-approved wiring, 3-pin connectors and circuit boards
  • ✓ Pure gold bonding wires inside the chips instead of alloy or copper
  • ✓ Works with WLED, ESP32, Raspberry Pi, UNO R3, SP107E, SP630E and K1000C
  • ✓ Cuttable at every LED; 3-pin plugs pre-fitted on both ends for daisy-chaining

Cons

  • ✗ No power supply or controller included; both are separate purchases
  • ✗ IP30 rating means indoor use only, no moisture protection
  • ✗ Strictly DC5V; 12V or 24V will destroy the strip
  • ✗ Full 300-LED run needs a 10A 50W supply, larger than most spare adapters

Manufacturer description

BTF-LIGHTING's WS2812B addressable LED strip gives you 300 individually programmable pixels across a 16.4ft flexible run, with the WS2812B IC built directly into each 5050 SMD package. That means one data line drives 24-bit color depth and 256 brightness levels per pixel, so chasing effects, gradients, and per-LED animations all come off a single ESP32, Raspberry Pi, or Arduino UNO R3 pin. The strip is UL Listed, built on a 10mm black PCB with pure gold bonding wires inside the chips rather than the alloy or copper wire used in cheaper strips, which BTF-LIGHTING cites for lower light decay…

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING WS2812B IC RGB LED Strip using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this LED strip come with a power supply and controller?

No. The box contains the strip, a voltage compensation wire, a 3-pin male connector, and a user manual. BTF-LIGHTING recommends a DC5V 10A 50W supply for the full 16.4ft 300-LED run, purchased separately along with a controller.

Can I run this on 12V or 24V?

No. This strip is 5V only and BTF-LIGHTING explicitly warns against 12V or 24V power supplies. Higher voltage will damage the WS2812B ICs.

Will it work with WLED and an ESP32?

Yes. WS2812B is single-data-line SPI addressable, and the listing names ESP32, WLED, Raspberry Pi and Arduino UNO R3 among supported DIY setups, plus SP803E, SP107E, SP630E and industrial K1000C/K8000C controllers.

Can I cut the strip to a shorter length?

Yes, it is cuttable at each of the 300 LEDs for custom lengths and shapes, and supports series or parallel connection. The 3-pin connectors are pre-installed on both ends for daisy-chaining.

Is this strip waterproof enough for outdoor use?

No. This is the IP30 version, rated for indoor use with 3M adhesive backing. BTF-LIGHTING also offers IP65 and IP67 variants, but the listing describes all three as indoor-use products.

Key Features

  • 【Pure Gold Wires】High-quality LED Chip. Instead of others' alloy chip wire or copper chip wire, This WS2812B RGB LED use Pure Gold Wires inner, which more stable, have exceptional quality, ultra bright, less light decay and longer life.
  • 【Individually Addressable WS2812B IC】 WS2812B IC Built-in 5050 SMD .Supporting SPI individual addressing, each LED is independently programmable; 24-bit color depth and 256-level brightness control enable smooth, precise full-spectrum lighting effects including static, chasing and dynamic modes
  • 【UL Listed】UL-certified LED strip for reliable safety, equipped with 3M double-sided adhesive; UL-approved wires, 3-pin connectors and circuit boards included. IP30/IP65 versions come with 3M tape for easy mounting; IP67 version requires fastening clips (3M tape not included)
  • 【Parameter】Flexible and cuttable 16.4ft LED strip 300LEDs=300IC=300Pixle.3-pin connectors pre-installed on either end for easy daisy chain connection.10mm Width.Black PCB.
  • 【Versatile Functions】Compatible with multiple controllers: DIY Projects (SP803E,ESP32, WLED, Rasp Pi, UNO R3 etc.), Tuya APP (DR03W), BanlanX APP (SP630E/SP530E/SP611E/SP602E/SP608E/SP107E/SP105E etc.),industrial-grade (K1000C, K8000C, etc.). Choose the right controller per your project.Recommended power supply: DC5V 10A 50W (for 16.4FT 300LED strip).
  • 【Flexible Installation,Wide Application】3-pin connectors pre-installed on either end for easy daisy chain connection.Each LED is cuttable for custom length and shape, supporting series or parallel connection. Ideal for LED screens, video walls, advertising boards, commercial venues (hotels, KTVs, bars), and festive decorations (Christmas, weddings). IP30/IP65/IP67 for indoor use.

Full Specifications

BrandBTF-LIGHTING
ColorBlack Pcb Ip30
StyleModern
ThemeIndoor LED Strip Lighting
Voltage5 volts
Wattage45
OccasionChristmas, Halloween, New Year
Unit Count16.4 Feet
Form FactorStrip Lights
Item Length199.2 inches
Light ColorMulticolor
Model NumberWS2812B5M60LB30
Power SourceCorded Electric
Material TypeSilicone Rubber
Product StyleModern
Control MethodApp
Controller TypeVoice Control
Item Dimensions4.72 x 3.94 x 0.59 inches
Number of Items1
Special FeatureDream color, Pure Gold Wire, WS2812B RGB IC
Full listing titleBTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 300LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller)

Ready to buy?

BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 300LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $29.99

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →