WAVLINK Gigabit Ethernet PCIe Network Card
Bottom line: The WAVLINK Gigabit Ethernet PCIe Network Card ($17.99 on Amazon as of 2026-11-21 23:21 UTC): Gigabit RJ45 over PCIe x1, x4, x8 or x16 slots; main trade-off: PCIe slots only, no legacy PCI compatibility.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Gigabit RJ45 over PCIe x1, x4, x8 or x16 slots
- ✓ Ships with both low-profile and standard brackets
- ✓ Driver support for Windows 11, Windows 10 and Linux
- ✓ Metal shielding cuts EMI and helps heat dissipation
Cons
- ✗ PCIe slots only, no legacy PCI compatibility
- ✗ 1G ceiling, no 2.5G or 10G headroom
- ✗ Plastic film on the PCIe edge must be peeled first
- ✗ WAVLINK lists no chipset, so ESXi or BSD support is unverified
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WAVLINK Gigabit Ethernet PCIe Network Card, so this read rests on the manufacturer's listed specs and the current price in the retro networking cards category (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Gigabit RJ45 over PCIe x1, x4, x8 or x16 slots"; the main trade-off is "PCIe slots only, no legacy PCI compatibility". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1G High-Speed Transmission: This 1G network card ushers in a new era of network transmission speed, offering speeds up to 10 times faster than traditional 100Mbps rates. It provides an exceptional online experience, ensuring swift file transfers, seamless HD video streaming, and lag-free online gaming.
- PCIe to 1G RJ45: This pcie ethernet card accommodates various PCI Express slot configurations, such as x1, x4, x8, and x16, enabling seamless installation and interchangeability across different motherboards to meet diverse hardware layouts and needs. Note: Compatible with PCI-E slots only, not for PCI slots.
- Seamless OS Compatibility: Compatible with Windows 11, Windows 10, and Linux systems, this ethernet card guarantees seamless compatibility. This pcie network card eradicates worries about system compatibility and grants you the complete convenience of high-speed networking.
- Flexible Bracket Versatility: Engineered with low-profile and standard bracket, this pcie nic provides heightened flexibility for diverse computer arrangements. Irrespective of your computer's specifications, effortless installation is ensured, optimizing your hardware setup.
- Robust Metal Shielding: This ethernet pcie card minimizes electromagnetic interference, enhancing stability and reliability with every connection. (Tip: Please remove the plastic film from the PCI-e interface before connecting to the PC's PCI-e slot.) Excellent heat dissipation can reduce the temperature quickly and maintain the stability of network transmission.
Full Specifications
| Brand | WAVLINK |
|---|---|
| Weight | 1g |
| Compatibility | PC, Linux |
| Built-In Media | 1 Gbps PCIe Network Card |
| Number of Items | 1 |
| Compatible Devices | Desktop |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 1 Gigabits Per Second |
| Hardware Interface | PCIE x 1, PCIE x 16, PCIE x 4, PCIE x 8 |
| Warranty Description | 1 Year |
| Full listing title | WAVLINK Gigabit Ethernet PCIe Network Card, 10/100/1000Mbps RJ45 LAN Adapter for Desktop PC, Windows 11/10/Linux Supported 1G PCIe Network Card for PC |
Ready to buy?
WAVLINK Gigabit Ethernet PCIe Network Card, 10/100/1000Mbps RJ45 LAN Adapter for Desktop PC, Windows 11/10/Linux Supported 1G PCIe Network Card for PC is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
- LLM-Driven Driver Install on Windows 98, 2000, and XP: Vision-LLM Walkthroughs from a 4-PC Retro Fleet
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- Logitech G29 vs HORI Force Feedback: Best Beginner Sim-Racing Wheel in 2026
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- How to Install Windows 98 SE on a CompactFlash Boot Drive in 2026 (Retro PC Build Guide)
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- GeForce4 Ti 4600 tuning guide — ForceWare, Detonator, and XP/98 driver pairing
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- Retro Game Emulator Online: Top Browser-Based Picks for 2026
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Local AI News You Missed in April 2026
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Revive an Old Payphone with a Raspberry Pi Zero 2W
- Best Bluetooth Controller for Switch and Retro Emulation on Steam Deck (2026)
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- NVMe vs SATA for Gaming: WD Blue SN550 vs Crucial BX500 in 2026
- Best Quiet CPU Cooler for Ryzen 7 3700X Silent Builds in 2026
- RTX 3060 12GB vs RTX 4090 for Local LLMs (2026): Is 2x VRAM Worth the Price Jump?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090