Skip to main content
Thermalrlght TL-Fan and ARGB HUB X8, Supports 8 Case Fans, 4-Pin PWM and 3-Pin 5V ARGB Support, SATA Power Connection((12V 4-pin RGB is not Supported))
THERMALRLGHT

Thermalrlght TL-Fan and ARGB HUB X8

Bottom line: The Thermalrlght TL-Fan and ARGB HUB X8 is a specs-and-price decision rather than a crowd-consensus one in the rgb & lighting category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Before you buy

  • Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Thermalrlght TL-Fan and ARGB HUB X8, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【 Stable output 】 The ARGB and FAN hub is a direct output of SATA power supply, which can maintain stable output under high load conditions. The overall black color ensures stable functionality
  • 【 Support for ARGB and PWM 】 Not only does it support devices with lighting such as ARGB fans and ARGB light strips, but it also supports interfaces for PWM fans. After connecting to the motherboard, they can achieve lamp effect synchronization of 3PIN 5V light interfaces and synchronous speed of PWM fans
  • 【 Convenient installation 】 Equipped with strong double-sided stickers, FAN and ARGB HUB hubs can be fixed to the appropriate chassis position according to your needs. It is simple, safe, and guaranteed, and can be installed according to the manual
  • 【Detailed Description】 This product has a red interface for PWM speed recognition. Due to the limitation of the PWM motherboard IC reading principle, only a single fan speed inserted into the red interface is recognized
  • 【Matters needing attention】Please note that this HUB cannot adjust the fan speed and color of the fan lights. Please connect the power interface of this product to the 4-pin PWM interface of the motherboard. The light interface of this product should be connected to the 5V 3-pin ARGB interface of the motherboard. If connected to the wrong interface, it may cause damage to the HUB
  • Attention: This product only serves to expand the fan interface and lighting interface, and does not have the function of controlling speed and adjusting lighting.

Full Specifications

BrandTHERMALRLGHT
ColorBlack
Mfr Part NumberARGB HUB×8
Number of Ports8
Special FeatureLightweight
Total Usb Ports8
Compatible DevicesDesktops
Data Transfer Rate5 GHz
Enclosure MaterialPlastic
Hardware InterfaceUSB
Additional FeaturesLightweight
Warranty Description3
Full listing titleThermalrlght TL-Fan and ARGB HUB X8, Supports 8 Case Fans, 4-Pin PWM and 3-Pin 5V ARGB Support, SATA Power Connection((12V 4-pin RGB is not Supported))

Ready to buy?

Thermalrlght TL-Fan and ARGB HUB X8, Supports 8 Case Fans, 4-Pin PWM and 3-Pin 5V ARGB Support, SATA Power Connection((12V 4-pin RGB is not Supported)) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →