CORSAIR RS140 140mm PWM Fans – Daisy-Chain Connection – Low-Noise – Magnetic Dome Bearing – Dual Pack – Black
Bottom line: The CORSAIR RS140 140mm PWM Fans: Daisy-chain 4-pin PWM runs multiple fans off one motherboard header; main trade-off: 1,700 RPM top speed will be audible at full PWM ramp.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Daisy-chain 4-pin PWM runs multiple fans off one motherboard header
- ✓ 3.46mm-H2O static pressure suits radiators and dense heatsinks
- ✓ Up to 95.5 CFM airflow at a 1,700 RPM ceiling
- ✓ AirGuide anti-vortex vanes aim airflow at specific hot components
Cons
- ✗ 1,700 RPM top speed will be audible at full PWM ramp
- ✗ 140mm only - no 120mm option in this dual pack
- ✗ Black colorway only; no white or RGB variant here
- ✗ Needs a PWM header, not a 3-pin voltage-controlled fan header
Manufacturer description
The CORSAIR RS140 Dual Pack solves the cable-clutter problem that plagues most 140mm fan installs. Each fan carries a daisy-chain 4-pin PWM connector, so you link both units (and additional RS fans) and drive the whole array from a single motherboard PWM header instead of hunting for splitters. Performance backs up the convenience: the RS140 spins up to 1,700 RPM, moves up to 95.5 CFM, and holds 3.46mm-H2O of static pressure, which is the figure that matters when you are pushing air through a dense radiator or a tower heatsink rather than across open case space. CORSAIR AirGuide anti-vortex…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CORSAIR RS140 140mm PWM Fans, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. On the listing's own facts, the case for it is "Daisy-chain 4-pin PWM runs multiple fans off one motherboard header"; the main trade-off is "1,700 RPM top speed will be audible at full PWM ramp". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many RS140 fans can I daisy-chain together?
Each fan has a pass-through 4-pin PWM connector so you can link fans in series and control them from one motherboard PWM header. CORSAIR does not publish a chain limit in this listing, so check the product page or your motherboard header's current rating before building a long chain.
Are these good radiator fans or just case fans?
Both. The RS140 is rated at 3.46mm-H2O static pressure, which is the spec that lets a fan push air through radiator fins and heatsink stacks rather than stalling against them. AirGuide vanes are specifically tuned for radiator and heatsink mounting.
How loud are they at full speed?
CORSAIR does not list a dBA figure here, but the fans use a Magnetic Dome bearing designed to cut friction noise, and Zero RPM mode stops them entirely at low load. At the 1,700 RPM ceiling expect audible airflow, as with any 140mm fan at maximum PWM.
Do I get two fans for the price listed?
Yes. This is the Dual Pack SKU, so the listing covers two 140mm fans. Pricing changes frequently on Amazon, so confirm current pricing and availability on the listing before ordering.
Will these work on a 3-pin fan header?
The RS140 uses a 4-pin PWM connector and relies on PWM signaling for its speed control and Zero RPM behavior. A 3-pin header will typically spin them but without PWM speed control; use a 4-pin PWM header for the intended functionality.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Streamlined Fan Connections: Daisy-chain multiple fans together and control them all through just a single 4-pin PWM connector.
- Precise PWM Speeds: Set your fan speeds up to 1,700 RPM while providing up to 95.5 CFM airflow to your system.
- CORSAIR AirGuide Technology: Anti-vortex vanes direct airflow at your hottest components for concentrated cooling, pushing air in the direction you need when mounted to a radiator or heatsink.
- High Static Pressure: RS fans work well as radiator fans with a static pressure of 3.46mm-H2O to push through obstructions.
- Quiet Operation with Magnetic Dome Bearing: CORSAIR’s Magnetic Dome bearing minimises noise and reduces friction for greater longevity.
Full Specifications
| Brand | Corsair |
|---|---|
| Color | Black |
| Model | CO-9050191-WW |
| Voltage | 12 volts_of_direct_current |
| Wattage | 5.4 watts |
| Material | Copper |
| Unit Count | 2 Count |
| Noise Level | 36 db |
| Part Number | CO-9050191-WW |
| Material Type | Copper |
| Cooling Method | Fan |
| Number of Items | 1 |
| Number of Packs | 2 |
| Air Flow Capacity | 95.5 cfm |
| Compatible Devices | Desktop, Laptop, Radiator, Heatsink |
| Precise PWM Speeds | Set your fan speeds up to 1,700 RPM while providing up to 95.5 CFM airflow to your system. |
| High Static Pressure | RS fans work well as radiator fans with a static pressure of 3.46mm-H2O to push through obstructions. |
| Power Connector Type | 4-Pin |
| Warranty Description | 5 Year Manufacturer |
| Maximum Rotational Speed | 1700 rpm |
Benchmark data for other processors
Ready to buy?
CORSAIR RS140 140mm PWM Fans – Daisy-Chain Connection – Low-Noise – Magnetic Dome Bearing – Dual Pack – Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- DGX Spark vs Mac Studio M3 Ultra: Which AI Dev Machine Wins in 2026?
- GLM-5.2 Is Now the Most Intelligent Open-Weights Model — and the Most Verbose
- Logitech G29 vs HORI Force Feedback: Best Beginner Sim-Racing Wheel in 2026
- How to run Llama 3.1 70B on Apple M4 Max
- Best 1TB SATA SSDs for PC Builds and Retro Upgrades
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best Sim Racing Wheels for Beginners in 2026
- Coreboot + AMD openSIL: Windows 11 Works on MSI Ryzen
- Best PC Upgrades to Buy Before the 2026 Memory Price Spike
- Gemini-SQL2 Tops Text-to-SQL: Can an RTX 3060 Run a Local SQL Model?
- Best Sim Racing Wheels for PC and Console in 2026
- AMD Challenges Nvidia DGX Spark with $3,999 Ryzen AI Halo
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Raspberry Pi 4 8GB vs Pi 5 vs Pi Zero W for a 2026 Homelab
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Best Budget GPU for Local LLMs Under $300 in 2026: Why the RTX 3060 12GB Still Wins
- Build a Budget Self-Hosted Game Server on a Ryzen 5 5600G in 2026
- Gemini 3.5 Flash vs Local LLMs on a 12GB GPU: When Cloud Wins
- Best GPU for Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- Why You Shouldn't Leave Model Selection on Default in Copilot, Gemini, and Other AI Tools
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090