Skip to main content
EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter, Infinity Mirror ARGB, White | Reduced Cable Strain, 180 Degree Adapter, Infinity Mirror ARGB, 5V 3-Pin ARGB Sync, Clean Cable Routing, Showcase PC Builds
EZDIY-FAB

EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter

Bottom line: The EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter: 180° turn sends the 24-pin cable straight toward the routing hole; main trade-off: needs 8-10 mm clearance around the 24-pin connector.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar rgb & lighting

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 180° turn sends the 24-pin cable straight toward the routing hole
  • ✓ Reduces strain on the motherboard 24-pin connector
  • ✓ Infinity mirror ARGB adds depth behind tempered-glass panels
  • ✓ 5V 3-pin ARGB sync matches fans and light strips
  • ✓ Copper alloy terminals for secure ATX power contact

Cons

  • ✗ Needs 8-10 mm clearance around the 24-pin connector
  • ✗ May not fit if the routing hole sits too close to the connector
  • ✗ ARGB requires a 5V 3-pin header or controller, not 12V RGB
  • ✗ Adds a second connection point that must be fully seated and latched

Manufacturer description

The EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter turns your motherboard power connection into a lit feature of your build. It plugs into the 24-pin header and turns the cable back 180 degrees, so the main power lead runs straight toward the routing hole instead of looping out across the board. That means less visible cable clutter and less strain on the connector, which matters most in compact cases and builds behind tempered glass. The white housing carries a shield-style infinity mirror with built-in ARGB lighting that gives a layered, glowing effect. Connect it to a 5V 3-pin ARGB…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. EZDIY-FAB's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the EZDIY-FAB 24-pin 180 degree adapter fit my motherboard?

It works with ATX 24-pin connectors on ATX, mATX and ITX boards that have enough room. EZDIY-FAB specifies 8-10 mm of clearance around the motherboard's 24-pin connector. Also check that there is space between the connector and your case's routing hole.

What do I plug the ARGB lighting into?

Plug it into a compatible 5V 3-pin ARGB motherboard header or ARGB controller. That syncs it with your other ARGB fans and strips. It is not designed for 12V 4-pin RGB headers.

How do I know the adapter is installed correctly?

Push it in until there is no visible gap between the adapter and the motherboard connector. Then confirm the latch is engaged on both the motherboard side and the PSU cable side.

Does it come in black?

Yes. This listing is the white version, and EZDIY-FAB also makes the adapter in black so you can match your build's colors.

What is the warranty on this adapter?

The product details don't state any warranty terms. Check the current listing or contact EZDIY-FAB to confirm coverage before you buy.

Key Features

  • Infinity Mirror ARGB Design: Features a shield-inspired infinity mirror with built-in ARGB lighting, adding layered depth and a soft visual glow to showcase builds, tempered-glass cases, and coordinated gaming setups.
  • 180° Cable Routing & Strain Relief: The 180-degree ATX 24-pin angle adapter redirects the motherboard power cable for cleaner routing, helping reduce visible cable clutter and connector strain in compact or display-focused PC builds.
  • Stable Power Connection: High-conductivity copper alloy terminals support stable power transmission and secure contact for ATX 24-pin motherboard connections in ATX, mATX, and ITX systems with adequate clearance.
  • 5V 3-Pin ARGB Sync: Connects to a compatible 5V 3-pin ARGB motherboard header or controller for synchronized lighting effects that match fans, light strips, and other ARGB components.
  • Available in Black and White: Choose from two classic colors to perfectly match your build’s aesthetic, ensuring a visually cohesive and powerful setup.
  • Ensure Clearance Before Purchase: Before buying, verify that there's enough space between the motherboard’s 24-pin connector and the PC case routing hole to avoid installation interference. Use the provided dimensions to ensure smooth cable routing without obstruction.

Full Specifications

BrandEZDIY-FAB
ColorWhite
ModelEZDPI231-1
Cable TypePower
Model NameEZDPI231-1
Unit Count1 Count
Part NumberEZDPI231-1
CompatibilityPC
Connector TypeAtx
Number of Pins24
Maximum Voltage12 volts_of_direct_current
Special FeatureInfinity Mirror ARGB Light, Shield-Inspired Design, 180-Degree Configuration
Connector GenderMale-to-Female
Specification MetIEEE
Compatible DevicesPersonal Computer
Indoor Outdoor UsageIndoor
Compatible Phone ModelsNo Compatible Phone Models
Available in Black and WhiteChoose from two classic colors to perfectly match your build’s aesthetic, ensuring a visually cohesive and powerful setup.
Recommended Uses For ProductPowering motherboards in desktop computers, especially in gaming or high-end PC builds with ARGB lighting.
Other Special Features of the ProductInfinity Mirror ARGB Light, Shield-Inspired Design, 180-Degree Configuration
Full listing titleEZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter, Infinity Mirror ARGB, White | Reduced Cable Strain, 180 Degree Adapter, Infinity Mirror ARGB, 5V 3-Pin ARGB Sync, Clean Cable Routing, Showcase PC Builds

Ready to buy?

EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter, Infinity Mirror ARGB, White | Reduced Cable Strain, 180 Degree Adapter, Infinity Mirror ARGB, 5V 3-Pin ARGB Sync, Clean Cable Routing, Showcase PC Builds is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter, Infinity Mirror ARGB, White | Reduced Cable Strain, 180 Degree Adapter, Infinity Mirror ARGB, 5V 3-Pin ARGB Sync, Clean Cable Routing, Showcase PC Builds
View on Amazon →