Suitable forPS2/N64/NES A/V to HDMI-compatible Converter and Line-doubler
Bottom line: The Suitable forPS2/N64/NES A/V to HDMI-compatible Converter and is a specs-and-price decision rather than a crowd-consensus one in the retro consoles category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Easy to operate.
- ✓ Backed by wengjack's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Features:Easy to operate.2 colors for you to choose.Suitable for various devices.The output resolution of this device is only up to 480p/576p.The retroscaler2x is a zero-latency device, verified with many different measurements and devices.Specifications:Material: ABSPackage Size: Approx. 13.5x14.5x3.5 for cm/5.31x5.71x1.38 inColor: Red/BlueNote:Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.Due to the difference between different monitors, the picture may not reflect the actual color of the item.Package includes:1x Converter
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Suitable forPS2/N64/NES A/V to HDMI-compatible Converter and…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro consoles category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Easy to operate.
- 2 colors for you to choose.
- Suitable for various devices.
- The output resolution of this device is only up to 480p/576p.
- The retroscaler2x is a zero-latency device, verified with many different measurements and devices.
Full Specifications
| Brand | wengjack |
|---|---|
| Interface | HDMI |
| Compatibility | N64, NES |
| Material Type | ABS |
| Number of Pins | 4 |
| Number of Channels | 1 |
| Item Dimensions L x W | 5.71"L x 5.31"W |
| Global Trade Identification Number | 18488022702826 |
Ready to buy?
Suitable forPS2/N64/NES A/V to HDMI-compatible Converter and Line-doubler is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Steam Deck Dock for 4K Desktop Gaming in 2026: JSAUX Docking Station Tested Against the Use Case
- Local-LLM PC Build on a 16GB Card: What r/LocalLLaMA and r/buildapc Concluded (2026)
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Mistral Medium 3.5 128B on Local Hardware: MLX 4-bit at ~70GB Explained
- retrorecs.com: A New Retro Game Recommendation Engine
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
- Best Streaming Gear for Starting a Channel in 2026
- Best CPU Cooler for AM4 Ryzen 7 5800X Overclocking Under $100 in 2026
- Raspberry Pi AI Module in 2026: Can a Pi + Hailo Run Local LLMs?
- Period-Correct 1999 Voodoo3 + Pentium III LAN Party Build Guide
- Raspberry Pi OS Moves to Linux 6.18 LTS: Performance Gains for Pi 4 Owners
- Period-Correct Windows 95 Pentium MMX Build Guide: 3dfx Voodoo 1, AWE32, and Authentic 1996 Gaming
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- Best Hardware for Running MoE LLMs Locally in 2026
- Best Streaming Gear for a $500 Twitch Starter Setup in 2026
- Steam Deck OLED vs ROG Ally X vs Legion Go: 2026 Gaming Handheld Shootout
- Logitech G29 vs HORI Force Feedback Wheel for Sim-Racing Beginners
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Build a Fully Local PDF-to-Audiobook Pipeline on Jetson Orin Nano Super
- GPT and Claude Flunked Bridgewater's Finance Test — Why a Local RAG Box Fills the Gap
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090