Hyperkin 3-in-1 HDTV Cable for Gamecube/ N64/ Super NES (SNES)
Bottom line: The Hyperkin 3-in-1 HDTV Cable for Gamecube/ N64/ Super NES ($34.00 on Amazon as of 2026-10-20 16:20 UTC): One cable covers GameCube, N64, and Super NES instead of three separate AV harnesses; main trade-off: NTSC consoles only, PAL owners are out of luck.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ One cable covers GameCube, N64, and Super NES instead of three separate AV harnesses
- ✓ 720p HD output over HDMI, no CRT or composite input required
- ✓ Plug and play, no drivers, firmware, or setup menus
- ✓ Clean stereo audio carried over the same HDMI run
Cons
- ✗ NTSC consoles only, PAL owners are out of luck
- ✗ Caps at 720p, no 1080p or 4K upscale option
- ✗ No scanline, aspect ratio, or scaler adjustment controls
- ✗ Fixed cable length limits where the console can sit relative to the TV
Manufacturer description
The Hyperkin 3-in-1 HDTV Cable is a single plug-and-play adapter that carries GameCube, Nintendo 64, and Super Nintendo signals to any modern HDMI television at 720p, so you can retire the composite hookups and the CRT they needed. One cable covers all three NTSC consoles, which means a shared shelf setup no longer requires juggling three separate AV harnesses behind the TV. Setup is genuinely driver-free: the console end seats in the original multi-out port, the HDMI end runs to your display, and the picture appears without software, firmware, or configuration menus. The cable upscales to…
SpecPicks Verdict
SpecPicks scored Hyperkin 3-in-1 HDTV Cable for Gamecube/ N64/ Super NES using a rating × review-volume × price-fit model applied to published specs and reviews across the retro consoles category. Hyperkin's retro consoles lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro consoles of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this work with my PAL SNES or N64?
No. Hyperkin lists this cable as compatible with NTSC models only, so PAL GameCube, N64, and Super NES consoles are not supported.
What resolution does it actually output?
720p over HDMI. That is the cable's fixed output, and there is no 1080p or 4K mode.
Do I need to install anything or change console settings?
No. It is plug and play: the console end goes into the original multi-out port and the HDMI end goes to your TV. No software or drivers are required.
Can I use the same cable across all three consoles?
Yes. The 3-in-1 design is built to work with GameCube, Nintendo 64, and Super NES (NTSC), so one cable covers your whole shelf.
Key Features
- 3-in-1 Compatibility – Works with GameCube, N64, and Super NES (NTSC models only)
- HD Upgrade – Displays your favorite retro games in 720p on modern HDTVs
- Plug and Play – Simple setup with no software or drivers required
- Clear Picture & Audio – Crisp visuals and clean stereo sound for the full retro experience
Full Specifications
| Brand | Hyperkin |
|---|---|
| Color | Black |
| Unit Count | 1 Count |
| Model Number | M07373 |
| Compatibility | N64, SNES, NES |
| Built-In Media | Micro cable |
| Connector Type | HDMI |
| Item Dimensions | 6.26 x 1.26 x 7.01 inches |
| Mfr Part Number | M07373 |
| Number of Items | 1 |
| Number of Ports | 4 |
| Power Plug Type | No Plug |
| Compatible Devices | Gaming Console |
| Global Trade Identification Number | 00810007710273 |
| Full listing title | Hyperkin 3-in-1 HDTV Cable for Gamecube/ N64/ Super NES (SNES) - 720p HD Output - Plug and Play AV to HDMI Adapter for Retro Gaming on Modern TVs |
Ready to buy?
Hyperkin 3-in-1 HDTV Cable for Gamecube/ N64/ Super NES (SNES) - 720p HD Output - Plug and Play AV to HDMI Adapter for Retro Gaming on Modern TVs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Retro Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- Intel's llm-scaler-vLLM 1.4 Adds Arc Pro B70: A Cheaper Local-Inference Path?
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming: Which Wins?
- How to Find and Join Active Quake 3 and UT99 Servers in 2026
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- Ryzen 9800X3D vs 7800X3D: Best CPU for an RTX 5070 Build
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Best Noctua Cooling Products in 2026: A Brand Buying Guide
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Qwen 3.6 27B on 16GB: RTX 5060 Ti 16GB vs RX 9060 XT 16GB by Quant (2026)
- Headset Mic vs USB Mic for Discord and Twitch: Recon 50 vs Blue Yeti
- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- Can a 12GB RTX 3060 Run Gemma 4 31B? Quantization & Tok/s Reality Check
- Framework Desktop & Ryzen AI Max+ 395 Review: Best Strix Halo Mini PCs in 2026
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- Best SSD for PS4 Pro Upgrade in 2026: SATA Picks That Actually Cut Load Times
- A Practical Look at the PlayStation Architecture — and Why It Still Matters
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090