FOIFKIN
FOIFKIN F1 PC Case
Bottom line: The FOIFKIN F1 PC Case ($74.99 on Amazon as of 2026-10-06): Six 120mm ARGB PWM fans pre-installed, no separate fan kit needed; main trade-off: only one 3.5in HDD mount, which limits bulk hard-drive storage.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Six 120mm ARGB PWM fans pre-installed, no separate fan kit needed
- ✓ Fits GPUs up to 400mm (15.75 in), including long triple-fan cards
- ✓ Top mount supports 360mm AIO liquid cooling radiators
- ✓ Dual-chamber layout keeps the PSU and cables out of the main chamber
- ✓ Front USB Type-C 3.0 plus USB 3.0 and two USB 2.0 ports
Cons
- ✗ Only one 3.5in HDD mount, which limits bulk hard-drive storage
- ✗ Listing gives cooler height as 170cm, likely a typo; check before buying a tall air cooler
- ✗ Listing names only a top 360mm radiator mount; no front or side radiator support stated
- ✗ Width figures on the listing conflict (123mm vs 8.38 in); confirm your desk fits it
Manufacturer description
The FOIFKIN F1 PC Case is an ATX mid-tower with a dual-chamber layout. The power supply and drives sit in their own compartment, which leaves the main chamber clear for your motherboard, graphics card and cooler. That makes cables easier to route and keeps PSU heat away from the GPU. Cooling comes installed. Six 120mm ARGB PWM fans are already fitted (five reverse-blade and one forward), so a first build doesn't need a separate fan kit. If you move to an all-in-one liquid cooler, the top of the case takes a 360mm radiator. There is room for current full-size hardware: graphics cards up to…
SpecPicks Verdict
SpecPicks scored FOIFKIN F1 PC Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. FOIFKIN's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long a graphics card can the FOIFKIN F1 fit?
The FOIFKIN F1 takes graphics cards up to 400mm (15.75 in) long, which covers most full-length triple-fan GPUs. Check your card's listed length against that figure before you order.
Does the FOIFKIN F1 case come with fans?
Yes. It comes with six 120mm ARGB PWM fans already installed: five reverse-blade fans and one forward fan. The front panel also has an LED switch button for the lighting.
Can I install a 360mm AIO liquid cooler in this case?
Yes. The top of the case supports radiators up to 360mm. The listing doesn't mention other radiator positions, so plan on the top mount for a 360mm AIO.
What motherboard and power supply sizes does the FOIFKIN F1 support?
It supports ATX, Micro-ATX and Mini-ITX motherboards and power supplies up to 200mm (7.87 in) long. The PSU sits in a separate chamber from the motherboard and GPU.
What ports are on the front panel?
The front I/O has 1x USB Type-C 3.0, 1x USB 3.0, 2x USB 2.0, microphone and audio jacks, plus an LED switch, a power button and a restart button.
Key Features
- Dual-chamber design separates hardware from power supply and drivers, enhancing thermal performance and cable management.
- Fully transparent high-hardness tempered glass showcases every detail of the hardware.
- Pre-installed with 6x 120mm ARGB PWM fans (5x reverse, 1x forward).
- Super Cooling System, supports 360mm radiators on top. Air cooling supports up to 170cm in height.
- ATX/M-ATX/ITX motherboards, supports GPUs up to 400mm (15.75 in), accommodates PSUs up to 200mm (7.87 in), supports 1x HDD and 3x SSDs. (Dimensions: 430*123*490mm / 16.9“*8.38”*19.2"in)
- I/O 1 x Type-C 3.0, 1 x USB 3.0, 2 x USB 2.0, Microphone & Audio, LED Switch Button, Power Button, Restart Button
Full Specifications
| Brand | FOIFKIN |
|---|---|
| Color | White |
| Material | Metal, Plastic, Tempered Glass |
| Case Type | Mid Tower |
| Model Name | F1 |
| Light Color | ARGB |
| Connectivity | USB |
| Compatibility | PC, Switch |
| Cooling Method | Air, Water |
| Total Usb Ports | 3 |
| Antenna Location | Business, Gaming |
| Compatible Devices | ATX PSU up to 220MM, ATX, M-ATX, ITX, GPUs up to 400MM, Radiator: 360/280/240/120MM |
| Enclosure Material | Metal, Plastic, Tempered Glass |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 1 |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | ATX, M-ATX, ITX |
| Internal Bays Quantity | 4 |
| Item Dimensions D x W x H | 16.9"D x 8.38"W x 19.2"H |
| Full listing title | FOIFKIN F1 PC Case - Pre-Installed 6 PWM ARGB Fan, ATX Mid-Tower Gaming PC Case, Type-C,360mm Radiator Support, FOIFKIN (Black, F1) (White) |
Ready to buy?
FOIFKIN F1 PC Case - Pre-Installed 6 PWM ARGB Fan, ATX Mid-Tower Gaming PC Case, Type-C,360mm Radiator Support, FOIFKIN (Black, F1) (White) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA/IDE-to-USB Adapters for Ripping Old Drives in 2026
- Lenovo G02 Retro Handheld Reportedly Ships With Pirated Game Library
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- SNES Classic vs Raspberry Pi 4 RetroPie: Which Retro Console Wins in 2026?
- Best Webcam for Streaming Under $200 (2026)
- How to run Llama 3.1 70B on Apple M4 Pro
- Logitech G502 HERO vs G29: Which Logitech Peripheral Belongs in Your Sim Rig?
- Best Budget SSD for 2026: 5 SATA and NVMe Picks
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- Running a Modern SATA SSD in a Windows XP Retro Gaming PC
- Ryzen AI Max 400 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- Sound Blaster Audigy 2 ZS in a 2026 WinXP Build: The Last True EAX Card
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- ROCm in 2026: Is AMD Finally a Real Local-LLM Option?
- Running Qwen3.6 35B A3B at 80 tok/s on a 12GB GPU: What the MSI RTX 3060 12GB Setup Looks Like
- Best Streaming Gear for Twitch Beginners in 2026
- Best Gaming Gifts Under $60 in 2026
- Handheld Gaming PCs Ranked: 2025's Best, Compared
- Why a Red Hat Engineer Ditched ARM64 for AMD Ryzen (Linux AI Builds)
- Why FurMark Has a 'GPU Killer' Reputation
- 34-Inch Ultrawide vs 27-Inch 4K for Coding and Gaming (2026)
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Qwen3.6-27B at Q4_K_M for Agentic Coding: Is the Quant Safe on a 12GB RTX 3060?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090