10Gb PCIe NIC Network Card, RJ45 Ethernet LAN, Aquantia AQC107 x4
Bottom line: The BZIZU 10Gb PCIe NIC Network Card: Negotiates 10G, 5G, 2.5G, 1G or 100M, so it runs on a 2.5G switch now and 10G later; main trade-off: windows Update driver can link at 1G or drop out; the Marvell AQtion package is required.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Negotiates 10G, 5G, 2.5G, 1G or 100M, so it runs on a 2.5G switch now and 10G later
- ✓ Needs only PCIe x4 (Gen2 or newer) and seats in any x4, x8 or x16 slot
- ✓ Full-height bracket fitted plus a spare low-profile bracket for SFF cases
- ✓ Linux and Proxmox load the atlantic kernel module with no extra setup
- ✓ Jumbo frames to 16K, 802.1Q VLAN, 802.1p QoS and 802.3az EEE at 5.3W full load
Cons
- ✗ Windows Update driver can link at 1G or drop out; the Marvell AQtion package is required
- ✗ A few older server boards refuse to POST with the card fitted
- ✗ Wake-on-LAN is not dependable on the AQC107 controller
- ✗ Copper RJ45 only, with no SFP+ cage for fiber or DAC links
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BZIZU 10Gb PCIe NIC Network Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Negotiates 10G, 5G, 2.5G, 1G or 100M, so it runs on a 2.5G switch now and 10G later"; the main trade-off is "Windows Update driver can link at 1G or drop out; the Marvell AQtion package is required". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- FIVE SPEEDS, NOT JUST TEN GIG: Links at 10G, 5G, 2.5G, 1G or 100M and takes the fastest the far end offers, so it runs on a 2.5G switch today and a 10G switch later without swapping the card
- INSTALL THE MARVELL DRIVER, NOT THE ONE WINDOWS PICKS: Owners report the driver Windows Update picks can link at 1G instead of 10G or drop in and out; the Marvell AQtion package for Windows 11, 10 and Server fixes it
- CHECK THE BOARD BEFORE YOU BUY: Modern UEFI desktops and workstations post normally, and Linux and Proxmox load the atlantic kernel module with no setup; a few older server boards refuse to post with it fitted
- FOUR LANES, ANY LONG SLOT: Pulls only x4 on a PCIe Gen2 or newer board and seats in an x4, x8 or x16 slot; a full height bracket is fitted and a spare low profile one ships for small form factor cases
- AQC107 WITH THE FEATURE SET: Jumbo frames to 16K, 802.1Q VLAN, 802.1p QoS and 802.3az EEE, drawing 5.3W at full 10G load; Wake-on-LAN is not something to rely on with this controller
Full Specifications
| Brand | BZIZU |
|---|---|
| Weight | 10g |
| Unit Count | 1 Count |
| Model Number | 10G-1T(1xRJ45) |
| Compatibility | Switch, Linux |
| Built-In Media | 10G Network Adapter PCI-E x4 Card, Driver CD, Short bracket |
| Mfr Part Number | TXA305 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 10 gigabits_per_second |
| Hardware Interface | PCI Express 3.0 |
| Warranty Description | One-year warranty |
| Item Dimensions L x W x H | 5.35"L x 0.87"W x 4.72"H |
Ready to buy?
10Gb PCIe NIC Network Card, RJ45 Ethernet LAN, Aquantia AQC107 x4 is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Racing Wheels and Controllers for Sim Racing in 2026
- Silicon Motion PCIe 6.0: Nvidia AI Drives Consumer Storage
- Local Whisper for Stream VODs: What Mic and GPU You Actually Need
- DeepCool AK620 vs Noctua NH-U12S for Ryzen 7 5800X: Which Air Cooler Wins in 2026?
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
- Best GPU for Qwen 3 14B (2026)
- Best 4K Gaming Monitors Under $500 in 2026
- Microsoft Now Recommends 32GB RAM for Gaming in 2026
- Streamer PC Specs Decoded: The 2026 Parts That Match
- Logitech G920 vs HORI Racing Wheel: Best Starter Sim Wheel in 2026
- Ryzen 5 2600 vs Ryzen 7 5800X for CPU-Only Qwen3 30B-A3B (2026)
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Best Bluetooth Controller for Switch and Retro Emulation on Steam Deck (2026)
- Best Budget Gaming Peripherals Under $100 in 2026
- Troubleshooting Corsair 12V-2x6 Cable Issues on RTX-Class GPUs (2026)
- Handheld Gaming PCs Ranked: 2025's Top Picks Compared
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- Linux Beats Windows 11 on AMD's Ryzen 9 9950X3D2
- Raspberry Pi 4 as a SimHub Dash for a Logitech G29 Rig
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090