Hose Vary 80 * 25mm Axial Exhaust Fan
Bottom line: The Hose Vary 80 * 25mm Axial Exhaust Fan: 58CFM airflow from an 80x80x25mm frame, enough for a small 3D printer enclosure; main trade-off: only 5W at DC12V, so static pressure is limited in long or bent ducting.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 58CFM airflow from an 80x80x25mm frame, enough for a small 3D printer enclosure
- ✓ PWM dimmer included, so speed adjusts anywhere from 0 to 100 percent by hand
- ✓ Dual ball bearings rated for continuous running, not sleeve-bearing duty cycles
- ✓ 38dBA measured at 1 meter in an anechoic chamber, quiet for a 4500RPM fan
- ✓ Ships complete: 12V adapter, 3-inch duct adapters, metal mesh, and 8 screws
Cons
- ✗ Only 5W at DC12V, so static pressure is limited in long or bent ducting
- ✗ 4500RPM is loud at full tilt; the dimmer is basically required indoors
- ✗ Duct adapters fit 3-inch hose only, no 4-inch grow-tent compatibility
- ✗ Assembly is DIY, Hose Vary ships it as loose parts with no pre-built housing
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Hose Vary 80 * 25mm Axial Exhaust Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "58CFM airflow from an 80x80x25mm frame, enough for a small 3D printer enclosure"; the main trade-off is "Only 5W at DC12V, so static pressure is limited in long or bent ducting". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- DC12V MOTOR: The ventilation kit selects the casing fan with two ball bearings, DC 12V rated voltage, air flow up to 58CFM. The fan size is 80*80*25mm / 3.2"*3.2"*1"(L*W*T). Working Temperature: -10 +70; Power: 5W
- QUIET & AGING-RESIST: The measurement of noise level is carried out in an anechoic chamber with the microphone positioned 1 meter from the air intake. Testing fan shall be hung in clean air. Noise: 38dBA
- PWM VARIABLE SPEED: The speed is adjusted from 0%100% by manual controlling of the dimmer. Equipped with the PWM controller, directly connect with the female socket of fan and select the desired speed level to start it
- MULTIPLE-APPLICATION: To meet the various applications as needed, the kit included two ducting ends to mount in round pipes, such as growing tent, 3D laser experiment, 3D cutting ventilation, 3D spray paint to exhausting bad airs or help cooling. Using directly with the casing fan by two sides of mounting meshes equipped in any small areas or square pipes. For 3inch duct / pipeline
- PRACTICAL KIT: Package included: 1 * DC12V Axial Fan (80x25mm), 1 * 3V12V US Plug Power Adapter, 1 * Plastic Ducting Adapters (for 3-inch hose / pipe), 1 * Black Metal Mesh, 8 * Fastened Screws, 1 * English / Japanese User Manual. You need DIY the kit with all accessories together
- HIGH-SPEED PERFORMANCE: Features a powerful 4500RPM motor that provides efficient air circulation and extraction, ensuring effective ventilation for soldering stations, 3D printer enclosures, and other confined workspaces requiring continuous airflow
Full Specifications
| Brand | Hose Vary |
|---|---|
| Model | BK |
| Voltage | 12 Volts (DC) |
| Wattage | 5 watts |
| Material | Metal, Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 38 Decibels |
| Part Number | DC8025 |
| Material Type | Metal, Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 58 Cubic Feet Per Minute |
| Compatible Devices | Amplifier, Printer |
| Included Components | Controller, Mesh, Duct Flange |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 4500 RPM |
| Item Dimensions L x W x H | 3.15"L x 3.15"W x 0.98"H |
| Full listing title | 80 * 25mm Axial Exhaust Fan, 3inch Smoke Extractor | 4500RPM, DC12V Motor, AC Controller, 3" Flange, DIY Kit for 3D Printer Enclosure, Paint Booth, Ventilation |
Benchmark data for other processors
Ready to buy?
80 * 25mm Axial Exhaust Fan, 3inch Smoke Extractor | 4500RPM, DC12V Motor, AC Controller, 3" Flange, DIY Kit for 3D Printer Enclosure, Paint Booth, Ventilation is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Qwen 3.6 27B vs Llama 3.1 70B on Local Hardware: tok/s, VRAM, and Quality (2026)
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
- Best PC Gaming Gear for Console Players Making the Switch in 2026
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- Prompt Injection Still Breaks Local AI Agents in 2026
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- Best Mouse Pads for Competitive FPS Gaming in 2026
- That Game Boy Clone Runs Too Fast — and the Fix Is a Clock Crystal
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive: The CompactFlash + IDE Workflow
- Build a RetroPie Handheld in 2026: A Complete Step-by-Step Guide
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- Microsoft and Mistral Sign Multi-Billion Europe AI Infra Deal
- Why FurMark Has a 'GPU Killer' Reputation
- Lenovo G02 Retro Handheld Reportedly Ships Preloaded With Pirated Games
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- Qwen-Audio-3.0-TTS-Plus Tops the Speech Arena: Run It Locally on an RTX 3060?
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
- Grok 4.5, GPT-5.6, Kimi K3: four frontier models in eight days — what it means for local rigs
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Ryzen 7 5800X3D vs Core i7-14700K: The 2026 DDR4 Value Fight
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090