InnoGear Mic Stand Desk Max Load 2.64 lb Desktop Microphone Stand Boom Arm
Bottom line: The InnoGear Mic Stand Desk Max Load 2.64 lb Desktop Microphone Stand: Weighted 2.4 lb steel base holds mics up to 2.64 lb; main trade-off: 2.64 lb load ceiling rules out heavier broadcast mics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Weighted 2.4 lb steel base holds mics up to 2.64 lb
- ✓ Fits Fifine AM8, Blue Yeti, HyperX QuadCast, SoloCast, AT2020
- ✓ Includes 3/8"-to-5/8" and 3/8"-to-1/4" universal adapters
- ✓ Two pivot points plus 270° angle range for precise aiming
- ✓ Non-slip pads keep the compact 6.7 x 4.7 in base scratch-free
Cons
- ✗ 2.64 lb load ceiling rules out heavier broadcast mics
- ✗ Allen-wrench-only adjustment is slower than knob tightening
- ✗ Wrench hides on the base underside, easy to misplace
- ✗ Desktop-only footprint takes up usable desk space
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for InnoGear Mic Stand Desk Max Load 2.64 lb Desktop Microphone Stand…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Weighted 2.4 lb steel base holds mics up to 2.64 lb"; the main trade-off is "2.64 lb load ceiling rules out heavier broadcast mics". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Superior Stability & Durability: Crafted from premium steel with a weighted 2.4lb base, this microphone stand offers unmatched stability and can support up to 2.64 lbs—far exceeding competitors limited to 1.98 lbs. Perfect for heavy-duty microphones and equipment.
- Universal Compatibility for All Your Devices: With included universal adapters (3/8" to 5/8" and 3/8" to 1/4"), this mic stand seamlessly works with microphones, webcams, cameras, and more. Ideal for content creators, gamers, and professionals seeking versatility.
- Ultra-Flexible Positioning with Precision Control: Featuring two pivot points and a 270° flexible angle adjustment, this table stand allows for precise positioning. The included Allen Wrench ensures secure adjustments without overtightening or damaging the stand, unlike other stands with traditional adjustment knobs (PLEASE NOTE: The included Allen Wrench is located on the back of the desktop stand base).
- Compact & Portable Design: With a compact base measuring just 6.7 x 4.7 inches and a foldable microphone arm, this microphone arm stand is perfect for small spaces and easy to transport, making it a great choice for on-the-go creators.
- Non-Slip, Scratch-Free Stability: The weighted base is equipped with non-slip pads, ensuring your desk stays scratch-free while providing added stability during use. No more slipping or sliding—just reliable performance.
Full Specifications
| Brand | InnoGear |
|---|---|
| Color | Black |
| Style | Universal Compatibility, Superior Loading Capacity of 2.64 lb, Adjustable Angles |
| Weight | 2.4lb |
| Material | Alloy Steel |
| Base Type | Flat |
| Model Name | DS3 |
| Unit Count | 1 Count |
| Finish Type | Painted/Powder Coated |
| Model Number | DS3 |
| Material Type | Alloy Steel |
| Product Style | Universal Compatibility, Superior Loading Capacity of 2.64 lb, Adjustable Angles |
| Maximum Height | 15 inches |
| Body Material Type | Steel |
| Included Components | Microphone Clip |
| Warranty Description | 12 months. |
| Manufacturer Part Number | DS3 |
| Mount thread size (inches) | 3/8", 5/8", 1/4" inches |
| Microphone Stand Thread Size | 1/4 inch, 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 2.6 pounds |
| Full listing title | InnoGear Mic Stand Desk Max Load 2.64 lb Desktop Microphone Stand Boom Arm | for Fifine AM8 K669B Blue Yeti HyperX, Minimal Footprint, Fine-Tune Tension, Heavy Hold, 2.64 lb Weight Capacity |
Ready to buy?
InnoGear Mic Stand Desk Max Load 2.64 lb Desktop Microphone Stand Boom Arm | for Fifine AM8 K669B Blue Yeti HyperX, Minimal Footprint, Fine-Tune Tension, Heavy Hold, 2.64 lb Weight Capacity is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Black Friday Monitor Deals 2026: 5 Picks From $100 1080p to 240Hz OLED
- Wired Headset vs Bluetooth Earbuds for Competitive FPS: The Latency Math
- Best GPUs for Mixtral 8x22B Local Inference in 2026
- SATA SSD vs NVMe for Gaming: Does It Actually Load Faster?
- Qwen 3.6-27B on an RTX 5070 Ti (16GB): What Fits at 50K Context and How Fast
- Best Webcam for Streaming and Remote Work (2026)
- Air vs AIO for the Ryzen 7 5800X: is the Noctua NH-U12S enough?
- Plug-and-Play Retro Consoles Compared: Genesis Mini vs SNES vs NES Classic
- Claude Limits Cut: Why a Local Fallback Rig Just Got Cheaper
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- One Desk, Two Sims: Swapping a G29 Wheel and an Extreme 3D Pro Stick
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- How to Fix a Raspberry Pi 5 That Won't Boot: Power, microSD, and Display Diagnostics
- NES Graphics Upgrade Mod Gains Community Traction
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Intel Nova Lake-S 22-Core vs AMD Ryzen 7 5800X: Is the Cache Chip Worth Upgrading?
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- CRT Monitor for Retro Consoles: 2025 Buying Guide
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
- Best Budget GPU for Stable Diffusion and SDXL in 2026
- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- RTX 4090 AI Video Generation: 2026 Performance Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090