TOSEASTARS 3 Axis Nema 34 Stepper Motor Kit CNC Controller

SpecPicks Verdict

SpecPicks scored TOSEASTARS 3 Axis Nema 34 Stepper Motor Kit CNC Controller using a rating × review-volume × price-fit model applied to published specs and reviews across the displays & upscalers category. TOSEASTARS's displays & upscalers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for displays & upscalers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

• Professional CNC Controller Kit: This is a professional 3d printer DIY kit made of high premium materials,which includes 3 pcs Nema23 stepper motors, 3 pcs drivers, 3pcs power supply, and 1pc USB Mach3 control board, capable of meeting your diverse needs. The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser cnc machine, automation devices.
• 3 Pcs Nema34 86mm Stepper Motor: 8.5Nm/850Ncm 1200 oz.in holding torque, nema 23 step motor size 86x86x118mm/3.38 x 3.38 x 4.65 inch. Current: 6A; 1.8 deg. step angle(200 steps/rev); 2 phase 4-lead wires; shaft diameter: 14mm key-way shaft, phase inductance 2.1±20%(mH) & resistance 0.5±10% ohms(Ω).
• 3 Pcs Nema 34 Stepper Motor Driver HB860C: HB860C driver Voltage: DC 24V-110V, AC 18-80V, which is suitable for all two-phase hybrid nema34 stepping motors. There are 16 kinds of micro steps, and the output current has 8 gears. Subdivision: 400-51200 steps/turn.
• Stable output 60V DC power supply: Rated Load: 400W (Max Load). Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage. Output voltage:DC60V (constant voltage).
• Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. As long as Mach3 is running, the control card can be used without installing any drivers.

Full Specifications

Ready to buy?

3 Axis Nema 34 Stepper Motor Kit CNC Controller with Nema34 Stepper Motors 8.5Nm 1200oz.in 6A, Motor Driver, 60V Power Supply, USB Mach3 Control Card for CNC Engraving Machine Router is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →