BIWIN
BIWIN M100 SATA SSD 1TB
Bottom line: The BIWIN M100 SATA SSD 1TB: 1TB capacity in a standard 2.5-inch bay, a drop-in swap for most laptops and desktops; main trade-off: SATA III 6Gb/s caps throughput near 560MB/s, well under NVMe drive speeds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 1TB capacity in a standard 2.5-inch bay, a drop-in swap for most laptops and desktops
- ✓ Sequential reads up to 560MB/s, right at the SATA III 6Gb/s interface ceiling
- ✓ SATA III 6Gb/s interface suits older boards and builds with no M.2 slot
- ✓ Straight 1TB replacement path for a system still booting off a mechanical hard drive
Cons
- ✗ SATA III 6Gb/s caps throughput near 560MB/s, well under NVMe drive speeds
- ✗ Write speed is not published; only the up-to-560MB/s read figure is listed
- ✗ No TBW endurance figure or warranty term stated in the product listing
- ✗ NAND type, controller, and DRAM cache are not disclosed by BIWIN
Manufacturer description
BIWIN SATA 2.5" M100 1TB
SpecPicks Verdict
SpecPicks scored BIWIN M100 SATA SSD 1TB using a rating × review-volume × price-fit model applied to published specs and reviews across the drives & media category. BIWIN's drives & media lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for drives & media of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- BIWIN SATA 2.5" M100 1TB
Full Specifications
| Brand | BIWIN |
|---|---|
| Model Name | M100-1TB |
| Read Speed | 550 megabytes_per_second |
| Model Number | M100-1TB |
| Compatibility | PC |
| Built-In Media | No |
| Mfr Part Number | BM100NN01TB-RGX |
| Number of Items | 1 |
| Special Feature | Shock Resistant |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Desktop, Laptop |
| Data Transfer Rate | 550 megabytes_per_second |
| Additional Features | Shock Resistant |
| Hard Disk Interface | Serial ATA-600 |
| Included Components | No |
| Warranty Description | 3 Years Warranty |
| Hard Disk Description | Solid State Drive |
| Hard Disk Form Factor | 2.5 inches |
| Hardware Connectivity | SATA 6.0 Gb/s |
| Connectivity Technology | SATA |
| Full listing title | BIWIN M100 SATA SSD 1TB, 2.5" Internal SSD, Up to 560MB/s, Internal Solid State Drives 2.5 Inches SSD SATA III 6Gb/s, Laptop and PC Compatible, Office Work School |
Hardware benchmark data
Ready to buy?
BIWIN M100 SATA SSD 1TB, 2.5" Internal SSD, Up to 560MB/s, Internal Solid State Drives 2.5 Inches SSD SATA III 6Gb/s, Laptop and PC Compatible, Office Work School is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Drives & Media
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Kimi K2.7 Code: 12x Cheaper Than GPT-5.5, But Can You Run It Locally?
- RTX 5090 Prebuilt vs a $700 RTX 3060 Local-LLM Box: What Extra VRAM Actually Buys
- Noctua NH-U12S vs ML240L RGB: Best Cooler for a 5800X
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- Build a Couch Emulation Station: Raspberry Pi 4 + 8BitDo SN30 Pro
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Best Way to Stream a PS4 Pro to PC: Elgato Cam Link 4K Capture Setup
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- Best PlayStation Controllers for PC Gaming in 2026
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- Kimi K3 Nears GPT-5.6 at Half the Cost — And What It Means for Home Rigs
- Benchmarking Open Models for Tool-Use on a Budget RTX 3060 Rig
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Steam Deck Randomly Awakens? Causes & Fixes (2026)
- Best Wireless Streaming Microphones for Twitch in 2026
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- How to run Qwen 3 14B on Arc B580
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- How Running Out of VRAM Affects Your FPS
- MicroPython Now Runs on the Super Nintendo — On Real Hardware
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090